Radialni ventilator, odsesovalni ventilator, ventilator, odsesovalni izpušni ventilator, izpušni ven

KASTRUP

Stanje: pripravljen za uporabo (rabljen), With hydraulic pump. Gsdpfx Aohw E D Sod Ajip

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Giodpehlp Efefx Ad Asp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Giodpfsd Tiu Eex Ad Aep Thermal input (GCV) (cooling): 43.5 kW Thermal input (GCV) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Gjdpfx Adjvllxdo Ajip Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 280 0113 4023, STROJ SI JE MOGOČE OGLEDATI V NAŠI TOVARNI V BOLOGNI. Gijdpfxswd Shho Ad Ajp

Stanje: novo, Leto izdelave: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Hanging rod for parts * Convection (uniform temperatures throughout the oven), * Locks for secure door opening and closing, * Maximum operating temperature: 230°C. Powder Coating Booth TQ0906 Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3,200 m3/h, * Hermetic lamp: 1 pc. * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality machinery offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products have a WE certificate. Godpfx Adjfgnyts Asip We offer our own transport – prices are arranged individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions. Please do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® Gijdpfxjiu Smbj Ad Aop 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), used T-slot angle plate Technical data: Dimensions Height: 1120 mm Width: 320 mm Slot width: 20 mm with - 7 horizontal T-slots Gedpfx Asgwxmxod Aeip used, in good condition

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support Gijdpfjfm T Hbex Ad Asp • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Stanje: rabljeno, Charger for Jungheinrich E 220 G 24/65 B-ET-DA forklift Giedpfxeh Axzts Ad Aep Online video inspection possible via Skype video call. We would be delighted to welcome you for a visit – further machines available in stock. Immediately available – can be inspected at any time. Located in Emskirchen / Nuremberg – test runs possible on site.