Samodejno Mitra žage

KASTO GKS 400 AU/600

Stanje: pripravljen za uporabo (rabljen), Fully hydraulic circular saw automatic machine for workshop and production. Material clamping is performed via hydraulic clamping vices. The control system provides easy machine operation. Cutting length can be precisely set using a vernier scale with 0.1 mm resolution. The piece count can be set through a piece counter, which will automatically switch off the machine when the desired quantity is reached. Material feed is achieved through a hydraulic cylinder, ensuring maximum cut accuracy. Should you have any questions or require a different cutting range, please feel free to call us. We would be pleased to demonstrate and present the machines to you. Technical Data: Bandsaws KASTO Machine type GKS AU Technical Specifications Ihodpfsiuz Smsx Af Tet Drive power, saw gearbox: 1.6 / 2.5 kW Cutting speed: 14 / 28 m/min Cutting range, round: 140 mm Cutting range, flat: 160 x 90 mm Saw feed (hydraulics): Hydraulic Saw blade diameter: 425 mm Hydraulic material feed: 600 mm Material support table: 1050 mm Machine dimensions (L x W): 2575 x 2700 mm Height: 1900 mm Machine weight: 1350 kg Year of manufacture: 1987

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Ihodpfx Afovivx No Tet Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, obratovalne ure: 9.080 h, Funkcionalnost: popolnoma funkcionalen, For sale: Well-maintained CNC Turning and Milling Center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel Paths: X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and Accessories: - Turret: 12 positions, all driven - Driven tool speed: max. 10,000 rpm - Parts catcher - Power supply: 400 V - Power consumption: 37.6 KVA - Internal coolant system Ijdpfexzqhrjx Af Tsht - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manual measuring arm for sub spindle - Short bar loader, manufacturer: LNS - Includes tooling: 8 fixed tools, 3 driven tools - Incl. extraction unit, manufacturer: Indusa - Complete documentation included Machine available immediately! The machine has been fully cleaned and inspected! Loading handled by us! Transport can be organized upon request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Koupil nový v roce 2021. Zprovozněn, ale nikdy nebyl používán, stav jako nový. Iedpfowalzyox Af Tjht

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 64532, used manual hydraulic tube bending device Ijdsdzw Hwepfx Af Teht available bending segments: 3/8, 3/4, 1 1/4 and 2" dimensions required: 850 x 640 x 780 mm

Stanje: rabljeno, Leto izdelave: 2011, Bar diameter: 32 mm Spindle bore: 38 mm Turning length: 320 mm Spindle speed: 8,000 rpm C-axis: 0.001° Sub-spindle: Pick-up station: 32 Turning length: 150 mm Spindle speed: 8,000 rpm C-axis: 0.001° Number of tools: 4+7+6+10 = 27 Number of milling stations: 4+4 Control unit: Mitsubishi M70 Number of axes: 5 + 2x C-axis (7 total) Chip conveyor: yes (LNS) Total power requirement: 7.5/5.5 kW Machine weight: approx. 3,300 kg Space requirement: approx. 2.5 x 1.2 x 1.82 m plus FMB CNC sliding head lathe Citizen A32-VII PL, year of manufacture 08/2011 with FMB Turbo 3-36 bar feeder Very good condition! Main spindle motor and bearings are new. Iodpfx Afjw Ed Tfe Teht Includes all accessories, clamping devices, manuals.

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Iodpfokvnumjx Af Tsht Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: rabljeno, Leto izdelave: 2008, premer struženja: 275 mm, izvrtina vretena: 80 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.345 mm, skupna višina: 2.232 mm, skupna dolžina: 4.339 mm, skupna širina: 2.232 mm, skupna masa: 7.600 kg, Oprema: dokumentacija / priročnik, Mori Seiki NL 2500 SY / 1250 CNC stružnica z Y-osjo, gnanimi orodji in drugo glavno vreteno CNC krmilje MSX-850-III (Mitsubishi 720 BM) Premer struženja 275 / 366 mm Premer izvrtine vretena 80 mm Hitrost vrtenja vretena 4000 min⁻¹ Glavni vretenski motor 18,5/15 kW Pomik X-osi 260 mm Pomik Y-osi +50 / -50 mm Pomik Z-osi: 1345 mm Pomik W-osi (protiprimež od glavnega vretena) 1275 mm Min. indeksiranje C-osi glavnega vretena 0,001° Število orodij v revolverju 12x Število gnanih orodij 12x Ihodpfx Afexnmzhe Tot Orodni konus BMT Podajalnik palic LNS Quick Load Servo III Vreteno gnana orodja 6000 min⁻¹ Za vsa vprašanja o stroju ali za dogovor o ogledu nas prosimo kontaktirajte po telefonu ali elektronski pošti. Vabimo vas, da si ogledate tudi naše druge oglase in pridobite celovit pregled nad našo zalogo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Iedpfxswlvlge Af Tjht Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 330 mm, izvrtina vretena: 78 mm, premer struženja nad ležiščem sani: 520 mm, višina središča: 260 mm, stružna dolžina: 1.500 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.670 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 2.135 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose: DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Iodpectutmjfx Af Tsht Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: - Infinitely variable speed control - Hardened and precision ground Z-axis guideways - Turcite coatings (on mating surfaces) of cross and top slides - Manual central lubrication with a pump for longitudinal and cross slides - Complete coolant system with rear splash guard and slide splash guard - Chuck guard - Switching rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine levelling pads