Cilindrični brusilni stroj

Karstens

Stanje: potreben popravila (rabljeno), Tip: AS - 900 Št. stroja: 74054 Razdalja med konicami: 900 mm Višina konic: 150 mm Hjdpfx Abjydfu Tjhjh Maks. dimenzija brusilnega kola: 400 x 80 x 127 mm Višina konic: 150 mm Razdalja med konicami: 900 mm ..... Stanje: Stroja ni mogoče vklopiti! Za stroj velja: stanje neznano! Obseg dobave po priloženih slikah ....

Stanje: zelo dobro (rabljeno), Grinding length 1000 mm Grinding diameter ø 350 mm In very good condition. Hodpfx Abek Abxxehjh

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Grinding wheel diameter: 600 mm Hsdpsrvybtsfx Abhjh Distance between centers: 300 mm Center height: 180 mm Grinding spindle headstock Tailstock with pressure cylinder

Stanje: rabljeno, Leto izdelave: 2003, Tehnične podrobnosti: Dolžina brušenja: 1500 mm Približna teža stroja: 12 t Hjdox Hgilopfx Abhsh Razdalja med konicama: 1500 mm Višina konic: 325 mm Ojačana vretena za obdelovanec do 250 kg nosilnosti Pogonska C-os za večkotno, navojno in ekscentrično brušenje. 3 brusilna vretena posamezno nameščena. Krmiljenje Siemens 840D

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Hedpfx Aeu Ixznjbhjh Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 650 mm Maximum grindable workpiece diameter: 360 mm Maximum load, cantilevered: 1000 N / 100 kg Maximum load between centres: 3000 N / 300 kg Z-Axis Table swivel range: 10° Table drive, hydraulic: 0–4 m/min X-Axis Infeed spindle stroke: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Infeed drive via DC motor Rapid speed: 48 mm/min/Ø Infeed cycles: Plunge cut, longitudinal grinding 4 preselectable speeds: mm/min/Ø 0.01–48 4 preselectable infeed increments: mm 0.001–0.1 Hjdpfetqf Sqjx Abhsh Outfeed during shoulder grinding: s 0–99; 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle head: universal, swiveling: ° 0–180 Grinding wheel (external): D x b x d mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece spindle head: Infinitely variable drive: Mk 4 1/min 30–270 / 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swiveling on turning part: ° 0–90 Tailstock: Quill mount/quill diameter: mm MK4/750 Quill stroke: mm 45 Quill force: N 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 µm Connections: Total machine connected load: kW 6.5–10 Grinding spindle head: kW 5.5 (7.5) Workpiece spindle head: kW 0.55 (1.1) Coolant purification: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: L 80 Pneumatics: bar 6 Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Centre distance: 1100 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm Quill force: 200–600 N manual (up to 2500 N possible, adjustable as an option) Table swiveling: 10 degrees Cross slide travel: 80 mm Rapid traverse: 50 mm Hjdpfx Asiv Au Eobhsh Air cushion fine adjustment: 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 liters Machine weight: net 3800 kg Infeed drive via DC motor Air-cushion supported rapid adjustment of the grinding spindle headstock for fast and safe positioning to the grinding position. Separate drive for external and internal spindle grinding. Fully automatic operation cycle, infeed motion controlled via rotary switch: Rapid advance, rapid return, grinding operation, infeed stop, micron infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding positions Workpiece headstock with infinitely variable drive for live and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, programmable return, feed amounts, feed rates, spark-out times, idle strokes, compatible with old Karstens infeed control, with coloured Siemens touch panel, position measuring in X and Z axes by HEIDENHAIN. Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Hjdpfx Abot Iklkohoh Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Hjdpfx Abjtqf Rzoheh Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: novo, Za vašo konvencionalno ali CNC okroglo brusilko Karstens/GP ponujamo rezervne dele vseh vrst za konjiček, vpenjalno glavo, brusilno glavo, kroglična vretena, merilna pravila z optičnim branjem, prirobnice brusnih plošč, pogonske motorje, pogone osi (BOSCH SIEMENS), zaščitne mehe, ležaje, pomične krmilnike K11/K21, nove in rabljene, krmilne bloke za os Z v izmenjavi ... Podobno tudi za Weiss/EMAG/GP-Rundschleifmaschinen/Studer/Kellenberger/Schaudt/T schudin/Tacchella/Dannobat/Bahmüller/Fortuna. Hodpfsraibvox Abhjh

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Center height 180 mm Center distance 1000 mm Max. swing diameter over bed 356 mm Max. swing diameter without bed bridge 506 mm Max. turning diameter over cross slide 220 mm Max. turning length 1000 mm Spindle nose D1-4/DIN55029 Spindle bore D38 mm Threads that can be cut: Metric, Whitworth, Module, Spindle speed 45 – 1800 rpm Tailstock taper Morse 3 Tailstock quill stroke 120 mm Motor power 2.4 kW Machine weight 900 kg Machine dimensions 1945 x 785 x 1204 mm Accessories - 3-jaw 160 mm chuck - 4-jaw 200 mm chuck - Face plate D320 mm - 3-axis digital readout system Hodpfx Abexbz Ebjhoh - Electromechanical spindle brake - Fixed and travelling steady rests - Fixed center - Coolant system - Halogen work lamp - Splash guard - Chuck guard - Tool post guard - Tailstock - Manuals Factory new model with 0 operating hours. Powered. Showroom machine.

Stanje: novo, Nudimo vam vse vrste rezervnih delov za vaše konvencionalne ali CNC Karstens/EMAG WEISS/GP okrogle brusilne stroje, in sicer za konjiček, vpenjalni vretena, brusilni vretena, kroglična vretena, steklene merilne letve, prirobnice brusnih plošč, pogonske motorje, pogone osi (BOSCH SIEMENS), krmilje ECKELMANN, mehove, ležaje, K11/K21 podajalne krmilnike – novi in rabljeni, reverzne bloke za Z-os v menjavi … Servisiramo stroje od letnika 1955: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP okrogle brusilne stroje, vse stroje na osnovi Karstens. Hedeup Aikjpfx Abheh Podobni/ EMAG-WEISS/ GP-okrogle brusilke/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 750 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg (between centres), 250 kg (in centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: Morse Taper 4 (MK4), infinitely variable speed control 30–450 rpm, swivelling range 0–90° Tailstock: MK4, quill stroke 45 mm, barrel correction Quill force: 200–600 N manual (up to 2500 N adjustable, optional) Table swivel: 12.5° Feed spindle adjustment travel: 80 mm Rapid traverse travel: 50 mm Coarse adjustment with air cushion: 280 mm Hodpfx Absiv Audoheh External grinding spindle motor: 4 kW (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3500 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding wheel head for quick and safe positioning at the grinding location Separate drives for external and internal grinding spindles Fully automatic operation, infeed motion controlled via cam switch: rapid advance, rapid return, grinding mode, infeed stop, micron infeed Automatic longitudinal grinding cycle Central coolant supply to all grinding points Workpiece headstock with infinitely variable drive for both live and lockable spindle Digital infeed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding - Inputs for retraction, infeed quantities, feed rates, spark-out times, idle strokes - Compatible with the existing Karstens infeed control - Colour Siemens touchscreen panel HEIDENHAIN scale in X and Z axis Comparable to Weiss, EMAG, GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja: 655 mm, premer struženja nad ležiščem sani: 655 mm, stružna dolžina: 5.000 mm, Premer vrtenja nad ležiščem 655 mm Premer vrtenja nad podporo 390 mm Dolžina struženja 5000 mm Hsdpfx Aew N D T Ssbhsh Vretenova odprtina 82 mm Hitrost vretena 9-1120 vrt/min Pomik 0,049-3 mm/obr. Skupna priključna moč 12 kW

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Karstens K11 1000 Fully Equipped The cylindrical grinding machine has been completely overhauled at PS-Karstens. The machine is tested and in very good condition. As we specialize in Karstens cylindrical grinding machines, we can offer you complete service (both electrical and mechanical) for the machine after purchase. Technical Data: - Centre distance: 1000 mm - Centre height: 180 mm - Workpiece weight: 100 kg between centres, 250 kg between centres - Grinding wheel diameter: 400 mm - Workpiece spindle: MT 4, speed infinitely variable 30-450 rpm, swiveling range 0 - 90° - Tailstock: MT4, quill stroke 45 mm, fine adjustment of the quill - Quill force: 200-600 N, hydraulically operated via foot pedal - Table inclination: 10 degrees - Cross feed spindle travel: 80 mm - Rapid traverse travel: 50 mm - Coarse adjustment air cushion: 280 mm - External grinding spindle motor: 4 kW - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 0.55 kW - Machine weight: net 3800 kg - Feed drive via DC motor - Air-cushioned rapid adjustment of the grinding spindle headstock for fast and safe approach of the grinding position. - Separate drives for the spindles for external and internal grinding. - Fully automatic operating cycle, feed motion via cam switch: rapid approach, rapid return, grinding operation, feed stop, fine feed (mym-feed). Hedpfx Aoh Riwdsbhsh - Automatic longitudinal grinding cycle - Central coolant supply for all grinding locations - Workpiece headstock with steplessly adjustable drive for live and fixed spindle operation. - Feed control for longitudinal and plunge grinding, input for retraction, feed amounts, feed rates, spark-out times, idle strokes - Digital display for grinding spindle B-axis, workpiece spindle, X- and Z-axis by HEIDENHAIN - Paper belt filter unit approx. 250 L - Comparable to Weiss/EMAG/GP-Cylindrical Grinding Machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna