Notranji horzontal pehanje stroj
Karl Klink RW 5

Name: Karl Klink RW 5
Brand: Karl Klink
Availability: InStock

Leto izdelave

1962

Stanje

Rabljeno

Lokacija

Hövelhof

Notranji horzontal pehanje stroj Karl Klink RW 5

Prikaži karto

Podatki o stroju

Opis stroja:: Notranji horzontal pehanje stroj

Proizvajalec:: Karl Klink

Model:: RW 5

Serijska številka:: 1790

Leto izdelave:: 1962

Stanje:: rabljeno

Cena in lokacija

Lokacija prodajalca:: Mergelweg 206, 33161 Hövelhof, Nemčija

Klic

Podrobnosti ponudbe

ID ponudbe:: A3473064

Št. reference:: WKG 1614

Nazadnje posodobljeno:: dne 01.07.2024

Opis

Manufacturer: Karl Klink
Model: RW 5
Year of manufacture: 1962
Weight: approx. 2,500 kg
Machine no.: 1790

General / Technical Data:
Hydraulic horizontal broaching machine in good, operational condition
Hjdpfx Ajdl Uzkjf Tjfb
Broaching stroke: 1,320 mm
Broaching stations: 1 unit
Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min)
Broaching tool clamping: Universal draw head for flat shanks
Through-bore in clamping table: Ø 100 mm
Workpiece diameter: max. 420 mm (limited by the oil and chip tray)
Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min
Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min
Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area)
Power supply: 380 Volt / 50 Hz / 15A
Hydraulic motor: 4 kW

Accessories / Special equipment:
• The machine is equipped with a universal draw head for flat shank tools
• Coolant/lubrication system
• No automatic tool loader included
• Short oil and chip tray (approx. 900 mm)

Remarks:
The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Dokumenti

3473064-01.pdf

Ponudnik

Registriran od: 2003

174 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 5257 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Avtomatska tračna žaga JAESPA W 400 AZ/P-Minipos

Iserlohn

793 km

Avtomatska tračna žaga
JAESPAW 400 AZ/P-Minipos

4.250 €

Začetna cena brez DDV

Klic

Stanje: dober (rabljeno), Leto izdelave: 1992, Automatic Band Saw, Manufacturer: JAESPA, Type: W400 AZ Control: Minipos 807, Year of manufacture: 1992 Hsdpfx Afegf H Sas Tofb Cutting diameter for round material: max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2,500 kg Accessories: 2 x saw blades, roller conveyor (6 m, motorized drive), machine documentation available Space requirements: 2.8 x 2.8 x 2 m

Poglej podrobnosti

Mali oglas

Sankt Margarethen im Lungau

144 km

Navpična stružnica
Mori SeikiVL 55 MC

35.000 €

Stalna cena brez DDV

Klic

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 124, Cena na upit Polovna CNC vertikalna strug mašina Proizvođač: MORI SEIKI Model: VL 55 Godina proizvodnje: 2001 Sa CNC upravljanjem MSC 518, revolverskom glavom za 12 alata i transportnim sistemom za strugotinu Maks. dužina obrade = 653 mm Maks. prečnik obrade = 550 mm Hfsdpfxewl An Is Af Tsb X osa = 350 mm Z osa = 660 mm Broj obrtaja do = 2000 o/min Snaga vretena = 30 kW Težina cca = 12,5 t

Poglej podrobnosti

Mali oglas

Stružnica L + Z, stružnica, mehanična stružnica WEILER LZ PRIMUS GS

Hessisch Lichtenau

682 km

Stružnica L + Z, stružnica, mehanična stružnica
WEILERLZ PRIMUS GS

9.700 €

Stalna cena brez DDV

Klic

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Hedpfx Aertd Uwjf Tofb Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Poglej podrobnosti

Mali oglas

Shildon

1.506 km

CNC stružnica
YangML-300

Klic

Stanje: zelo dobro (rabljeno), Novo 2008 Premer nad posteljo – 600 mm (Ø 23,62") Premer × dolžina obdelovanca – Ø 300 × 600 mm (Ø 11,81 × 23,62") Maks. premer obdelovanca – Ø 380 mm (Ø 14,96") Hsdpfjrfx Tnsx Af Tsfb Maks. hod osi Z/X – 600 / 240 mm (23,62 / 9,44") Z-os: FANUC 2,8 kW (4 KM) / 3000 vrt/min X-os: FANUC 2,8 kW (4 KM) / 3000 vrt/min Premer vretena/premer vlečne cevi – STD: Ø 77 / Ø 52 mm (Ø 3,03 / Ø 2,04") OPT: Ø 86 / Ø 77 mm (Ø 3,38 / Ø 3,03") Hitrost vretena – STD: 8'' vpenjalna glava 3500 vrt/min OPT: 8'' vpenjalna glava 4500 vrt/min, 10'' vpenjalna glava 3500 vrt/min Premer vpenjalne glave – STD: Ø 8'' ; OPT: Ø 10'' Hidravlična konjiček – hod 465 mm (18,3") MT št. 4 VDI orodni postaji – OPT: 8; STD: 10 Hladilna tekočina Transportni trak za odrezke Priključna moč – 208–220 V / 100 A / 3 faze / 60 Hz Tloris (D × Š × V) – 4080 × 1675 × 1842 mm (160,62 × 65,94 × 72,51") Bruto teža (približno) – 5200 kg (11.440 lbs)

Poglej podrobnosti

Mali oglas

Vijačni kompresor s hladilnim sušilnikom AGRE ALUP ALLEGRO 14+ 13 270

Schwanberg

69 km

Vijačni kompresor s hladilnim sušilnikom
AGRE ALUPALLEGRO 14+ 13 270

Klic

Stanje: novo, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Outstanding compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed Features: Compression Concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-adjusted via frequency inverter Controller: Graphic control unit C55DD Refrigerated Dryer: Integrated, refrigerant R513A Filtration: Includes cyclone separator Tank: Horizontal, painted Performance Data: Volume flow at 7.0 bar operating pressure: 0.26–2.26 m³/min Operating pressure min./max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil volume: 5.2 liters Hsdpfx Afoixt I Hs Tsfb Dimensions and Weight: L x W x H: 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air tank capacity: 270 liters

Poglej podrobnosti

Mali oglas

Vodoravni stroj za notranje izvlečenje Karl Klink RIW 6,3

Hövelhof

780 km

Vodoravni stroj za notranje izvlečenje
Karl KlinkRIW 6,3

Klic

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Hedpfxjiw Dlks Af Tefb Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Poglej podrobnosti

Mali oglas

NC kompaktna centrična objemka RÖHM RKZ-M 125 L

Rödermark

625 km

NC kompaktna centrična objemka
RÖHMRKZ-M 125 L

Klic

Stanje: dober (rabljeno), Leto izdelave: 2020, številka stroja/vozila: 164390-0000-Z2724, Offer 24059 Technical Data: - Jaw type: stepped jaws - Jaw width: 125 mm - Jaw height: 40 mm - Clamping range 1: 0 - 216 mm - Clamping range 2: 97 - 312 mm - Clamping force: 40 kN Hjdpfjrwmkasx Af Tjfb - Overall height: 140 mm - Weight: 33 kg - Minimum space required: L 463 x W 126 x H 145 mm

Poglej podrobnosti

Mali oglas

Vodoravni stroj za notranje izvlečenje Arthur Klink RIW 10 x 1200 x 400

Hövelhof

780 km

Vodoravni stroj za notranje izvlečenje
Arthur KlinkRIW 10 x 1200 x 400

Klic

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Hodeixntwjpfx Af Tjfb Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Poglej podrobnosti

Mali oglas

Deitingen

575 km

Orodje brusilni stroj
W. ScherrerSB 10

1.500 €

Stalna cena brez DDV

Klic

Stanje: zelo dobro (rabljeno), The SB-10 grinding machine enables flawless grinding of boring bars, thread-cutting tools, parting-off tools, or boring bar steels made of HSS or carbide for jig boring machines or lathes. By selecting the correct rake angle to suit the respective material, you achieve optimum utilization and a longer service life of the tools. These boring bars are still mostly ground by hand today and are subsequently used on high-quality machine tools. On the SB-10, the steels are ground using a profiled grinding wheel at the circumference. The desired profile is achieved effortlessly with a dressing diamond and the template mounted on the machine. For excellent stability and surface quality, the horizontal carriage is mounted on cross-roller guideways. Hfsdpfx Afjfqicxj Tob Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal adjustment: 130 mm Transverse adjustment: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions (W x D x H): approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Poglej podrobnosti

Mali oglas

Graziano (DMG) GT300 CNC Y + Sub (kot CTX300) Graziano (DMG) GT300 CNC Y + Sub (like CTX300)

Gussago

380 km

Graziano (DMG) GT300 CNC Y + Sub (kot CTX300)
Graziano (DMG)GT300 CNC Y + Sub (like CTX300)

Klic

Stanje: rabljeno, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i-T ASA 5 Main spindle power: 15 kW Self-centering chuck diameter: 175 mm ASA 5 spindle mount Bar capacity: 52 mm Turning diameter: 230 mm Turning length: 500 mm Max spindle speed: 5000 rpm Number of tool turrets: 1 Number of tool stations in first turret: 12 Number of driven tools in first turret: 12 First turret tool mounting type: VDI 30 X axis travel: 160 mm Y axis travel: +/- 32 mm Z axis travel: 550 mm Rapid traverse (X/Y/Z): 30 m/min Sub-spindle: yes ASA 5 spindle nose Max sub-spindle speed: 5000 rpm Sub-spindle power: 9 kW Sub-spindle bar capacity: 30 mm Bar feeder make and model: LNS with single guide tube Chip conveyor: belted Presetting: yes Year: 2000 The machine is available under power in our warehouse in Gussago (BS), Italy. Hjdpfx Afeqn E U Ts Tefb Mimu Machine Tools Italy

Poglej podrobnosti

Oglašujte tukaj