CNC KOTNA PLOŠČA LINIJA

KALTENBACH APS PROFIT LINE

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Hodokvnumjpfx Agionk Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Hnedpfx Agshzbipjijk Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: dober (rabljeno), Leto izdelave: 2007, VRTALNI STROJ Delovno območje: V630/1000M Min. / maks. višina: 10 – 450 mm Min. / maks. širina: 60 – 1.050 mm Maks. teža pozicioniranja: 9.000 kg Število vrtalnih enot: 3x Avtomatski menjalec orodij: 3x (3x 5 pozicij) Merjenje višine: Vključeno Merjenje širine: Vključeno Teža stroja: 12.000 kg Merilni sistem z valji za pomik Maks. hitrost: 42 m/min Min. dovodna dolžina: 1.500 mm Vrtalna enota: VD40 Hodpfjvpafyjx Agionk Pomik in pozicioniranje: servo-motorji s servo-invertorji Obrati vretena: brezstopenjsko 100 – 2.500 min⁻¹ (servo-motorji) Mazanje: notranje z meglo zraka / olja Vpenjalni stožec: SK 40 Premer svedrov za olje-cevne svedre: 8 – 40 mm Premer svedrov za karbidne svedre: 13 – 32 mm Rezkanje navojev: M8 – M24 Možnost označevanja izvrtin: Da, na 3 straneh ŽAGA Žaga: VB1050 Kapaciteta (višina x širina) 0°: 500 x 1.130 mm Kapaciteta (višina x širina) +/- 15°: 500 x 1.060 mm Kapaciteta (višina x širina) +/- 30°: 500 x 925 mm Kapaciteta (višina x širina) +/- 45°: 500 x 725 mm Kapaciteta (višina x širina) +/- 60°: 500 x 470 mm Brezhitrostno pomikanje traku: 40 – 120 m/min Motor žaginega pogona: 7,5 kW Dimenzije žaginega traku: 9.550 x 54 x 1,6 mm Hidravlično napenjanje traku: 48.000 N Teža stroja: +/- 8.500 kg

Stanje: zelo dobro (rabljeno), Generator zobatih koles z ribjim vzorcem MDV 2000 Značilnosti MDV 2000: Maks. premer kolesa: 2000 mm Min. premer kolesa: 50 mm Hnsdpfx Agefx Ibnjiek Maks. modul: 12 Min. modul: 3

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, Bandwidth: 1,500 mm Strip thickness: 0.6 – 3 mm Hedsqw Akmjpfx Agisnk Coil weight: 10 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Voortman V613 / VB1050 Ločeni CNC liniji za vrtanje in žaganje – letnik 2012. Hnodpfev U Ea Hox Agiok Rotacijsko vreteno. Avtomatski menjalec orodij. 24 metrov vhodnega transporta do VB1050. 24 metrov izhodnega transporta do CNC linije za vrtanje V613. 24 metrov izhodnega transporta. Valjčni podajalnik. VACAM CNC krmiljenje. Odstranjevanje kratkih kosov.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Voortman V613 / VB750 CNC vrtalno / žagalna linija – letnik 2008 Hedpfxev U Ebwo Agijnk Rotirajoče vreteno. 19 metrov vhodne proge. 12,5 metra izhodne proge. Valjčni podajalnik. Prečni prenosi na vhodni strani. Prečni prenosi na izhodni strani. Kapaciteta profila: 750 mm.

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), 603 LBH Technische Beschreibung Haupttechnische Daten • Minimale Sägeleistung bei 90° min. mm 60 x 10 max. mm 610 x 310 • Sägeleistung bei 45° mm 400 x 310 • Sägeleistung bei 60° (nur an zwei Flanschen mit entsprechendem Zubehör verfügbar) mm 250 x 250 • Gehrungswinkel +45° / -60° • Sägebandabmessung mm 34 x 1,1 • Sägebandgeschwindigkeit m/min 78 • Bandmotorleistung Hedpjl Si Uuofx Agijnk kW 4 • Arbeitshöhe mm 850

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 48.412 h, TRUMPF TruLaser 7040 Twin-head machine Year of manufacture: 2012 Laser power: 2 x 3200W Hnodpovnra Hsfx Agiok Operating hours: 48,412 h Machine weight: 16,000 kg Available from Q2 2025! Further information available upon request.

Stanje: rabljeno, Leto izdelave: 1991, Drilling capacity in steel (diameter): 50 mm Throat depth: 1100 mm Max. workpiece height: approx. 1000 mm Drilling capacity in cast iron: 60 mm Spindle taper: MT 5 Spindle speeds: 28 - 2500 rpm Hsdpfx Agju Sblweienk Feeds: 0.05 - 2 mm/rev Quill travel: 300 mm Distance base plate to spindle nose: 630 - 1380 mm Vertical arm adjustment: 750 mm Total power requirement: 6 kW Machine weight: approx. 4 t Machine dimensions (L x W x H): 2,740 x 1,140 x 2,590 mm - with tapping device - Accessories: cube table (L x W x H = 550 x 550 x 550 mm), machine vice, coolant system