Dizelski viličarji

Kalmar DCD80-6

Stanje: rabljeno, Leto izdelave: 2017, Premer struženja: 340 mm Dolžina struženja: 1000 mm Lhedsy E Txdjpfx Aaiol Krmiljenje: Mazatrol SmoothC Y-os: 100 (+/-50) mm Vreteno: 15 kW / 4000 vrt/min

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Max. premer obdelovanca: 400 mm Max. dolžina obdelovanca: 300 mm Max. premer vpenjalne glave: 500 mm Obodni premer: 520 mm Pomik osi X: 1.110 mm Pomik osi Z: 595 mm Glavno vreteno: moč (pri 40 / 100 % ED): 47/34 kW Glavno vreteno: navor (pri 40 / 100 % ED): 600 Nm Glavno vreteno: največje število vrt./min: 2.850 Krmilje: Fanuc 31i Lodpfx Ajxy Ac Ssaiehl Brez Y osi

Stanje: novo, Leto izdelave: 2026, nosilnost: 3.500 kg, dvižna višina: 5.000 mm, prosto dvigovanje: 5.000 mm, težišče tovora: 500 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.550 mm, proizvajalec motorjev: Yunnei EUR5 2,7L, dolžina vilic: 2.000 mm, skupna masa: 4.400 kg, lastna masa: 4.400 kg, skupna višina: 2.550 mm, skupna širina: 1.800 mm, barva: modra, Oprema: CE označba, bočni pomik, kabina, klimatska naprava, osvetlitev, podaljšek vilic, pogon na vsa štiri kolesa, spojka prikolice, sprednja zaščita, vilice za palete, Prodam terenski viličar s kapaciteto dviga 3,5T in stalnim pogonom 4x4. Motor: dizel EUR5 Yunnei DEF20CAF4 55kW 75KM Kabina s klimatsko napravo. Viličar je opremljen z: Lhedsxa Anhjpfx Aaiol - triplex drogom, višina dviga 5m - bočni pomik vilic - pozicioner vilic - širina nosilca kar 1500 mm!!! - vilice dolžine 1220 mm - dodatne druge vilice dolžine 2000 mm vključene v ceno - pnevmatske gume velikosti 20,5/70/16 Mere viličarja: dolžina 370 cm, širina 180 cm, višina 255 cm Teža viličarja: 4400 kg Dodatna možnost nakupa hidravlične žlice širine 1800 mm. Cena viličarja: 19.800 EUR Kot neposredni uvoznik zagotavljam dostop do rezervnih delov. Možnost lizinga ali obročnega odplačevanja. Vabljeni!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H008E03536T, Leto izdelave: 2019, obratovalne ure: 9.670 h, nosilnost: 30.000 kg, dvižna višina: 4.000 mm, prosto dvigovanje: 1.870 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 3.900 mm, moč: 194 kW (263,77 KM), dolžina vilic: 2.440 mm, lastna masa: 44.280 kg, vrsta pogona: Diesel, Heavy Duty Forklift Truck – Diesel Chassis number: H008E03536T Load center: 900 mm Fork width: 300 mm Fork thickness: 105 mm Mast type: Duplex Transmission: ZF WG211 Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 16.00-25 Front tires condition: 20 – 40% Rear tires type: Pneumatic Rear tires size: 16.00-25 Rear tires condition: 60 – 80% Description: In addition to this MAKE – MODEL, we have approximately 150 heavy duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our website – hinrichs-Forklifts. Leasing, hire purchase and financing at fair conditions are always possible for us. We are also happy to purchase your used machine, even if you do not buy a vehicle from us. Please contact me, Marco Levermann, for comprehensive advice on this MAKE – MODEL. Incidentally, our forklift specialist workshop is focused on the repair and maintenance of heavy equipment from 8 tons upwards. We are also happy to offer your vehicle for sale on commission at our premises. Lsdexzv Htopfx Aaishl Side shifter, fork positioner, Full cabin, air conditioning, electric cab lifting

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau Ledpfx Aajxq Tbteishl The Netherlands

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Forklift Kalmar LMV 9-600 Load capacity 9 t Lhsdpfx Aaevq Im Ueijl Diesel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Lodpfx Aaoyn Em Roiohl Spindle power: 22kW Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Tool changer: 16 positions Driven tool speed: 6000 RPM Lower turret positions: 16 Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 4.515 h, nosilnost: 18.000 kg, dvižna višina: 4.500 mm, težišče tovora: 1.200 mm, vrsta goriva: dizel, tip droga: triplex, moč: 168 kW (228,42 KM), proizvajalec motorjev: Cummins QSB6.7, širina nosilnega okvirja vilic: 2.600 mm, dolžina vilic: 2.400 mm, širina vilic: 260 mm, debelina vilic: 110 mm, stanje pnevmatik: 70 odstotek, velikost sprednje pnevmatike: 14.00-24, velikost zadnje pnevmatike: 14.00-24, skupna masa: 33.540 kg, barva: modra, Oprema: CE označba, bočni pomik, centralizirani mazalni sistem, kabina, klimatska naprava, vilice za palete, === TECHNICAL DATA === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lift height: 4.5 m Mast type: Triplex Forks: approx. 2,400 mm Side shifter: Yes Drive: Diesel Transmission: Automatic (Powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic tyres Stabilisers: No Engine: Cummins QSB6.7 Emission standard: Stage IV / V Lhjdpfx Asyid Iyoaijl Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certificate and complete documentation available Immediately ready for use and transportable Comprehensive technical documentation included Heavy-duty diesel forklift 18 tons Triplex mast with free lift Side shifter Comfort cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic power steering Continental pneumatic tyres Reversing camera Ideal for heavy industry, steel, concrete and port logistics. === CONDITION === Excellent condition – fully inspected, serviced, and tested by qualified personnel. Inspection available by appointment. Tyres in good condition (approx. 70%). Machine immediately ready for work. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / plus VAT). Reliable machines from first-hand ownership with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are thoroughly inspected, CE-certified and immediately ready for work. Spare parts and technical support available upon request. === DELIVERY === Loading available upon request. Flexible shipping options depending on destination and logistical requirements. All transports are professionally organised by the Collé Rental & Sales logistics team.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Lhsdpfsy Tmhzox Aaiol Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Ledpfx Asr A Hcbeaiehl Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.