Sušilnik za hlajenje s stisnjenim zrakom

Kaeser TA 5

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 4528, Št. artikla: 1.7917.3 Oprema / dodatne informacije: Hladilno sredstvo: R134a Ljdpsymmacefx Al Nshf Polnilna količina hladilnega sredstva: 0,28 kg Maks. delovni tlak (hladilni sistem): 18 bar Maks. delovni tlak (zračni sistem): 16 bar Nazivna napetost / faza / frekvenca: 230V/1/50Hz Nazivni tok: 2,0 A Okoljska temperatura: +5°C / +43°C Z REZERVOARJEM EPC 440-250 Št. artikla: 1.5938.4 // Serijska številka: 1236 // Leto izdelave: 2006

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 25.05.004, skupna dolžina: 9.500 mm, skupna širina: 2.250 mm, skupna višina: 2.300 mm, vhodna napetost: 380 V, moč: 50 kW (67,98 KM), skupna masa: 21.000 kg, lastna masa: 18.000 kg, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, Paper size 730 x 1060 mm and printing area 710 x 1040 mm Paper thickness 0.05 mm - 0.5 mm Lhjdpfxouf Sy As Al Nsf Set maximum speed (due to simulating sheet travel times of high-speed presses) is 4,000 per hour, but the machine can run much faster for commercial jobs. Four-cylinder central impression drum which completes all four print units in a single gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment, ensuring extremely precise register printing. Attached is an original factory brochure. Fully dry ice cleaned, and the cylinders are in very good condition. This machine is offered strictly on an “as is” basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is strictly fixed and based on the removal of parts that we could otherwise sell separately, such as: - The Mabeg feeder with vacuum belt infeed; - The four-section Baldwin stainless steel unit, providing each color with its own basin, a mixer, and adjustable temperature—meaning each basin can be set to a different temperature and alcohol content. We have dry ice cleaned the machine. The original intent was to use it prominently for printing electronic paper, but due to excessive startup losses, the project was discontinued. The machine has been with us for three years now, and due to its size I want it sold quickly. Hence, this very low price—it's an excellent machine. If the machine needs to be set up for testing and trial runs, this is possible at an additional cost of €10,000, of which €5,000 must be paid upfront as a deposit under specific conditions. All relevant information can be found in the original FAG brochure available as a PDF via this advertisement. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Stanje: rabljeno, Leto izdelave: 1999, Volumski pretok po ISO 7183 A1: 0,6 m³/min Tlačna rosišča: 3°C Tlačna izguba: 0,07 bar Električna poraba pri 100 % volumnem pretoku: 0,29 kW Električna poraba pri 50 % volumnem pretoku: 0,17 kW Presežni tlak: 3 do 16 bar Temperatura okolja: +3 do +43°C Največja vhodna temperatura komprimiranega zraka: 55°C Dimenzije (Š x G x V): 630 x 484 x 779 mm Masa: 70 kg Lodpfxjy Ernwo Al Nshf Priključek za komprimiran zrak: G 3/4 Priključek za izpust kondenzata: G 1/4 Električna napetost: 230 V / 1 / 50 Hz Skladiščna lokacija:

Stanje: rabljeno, Leto izdelave: 2001, NEW PRICE: 3,150.00 EURO Technical Data: Volume flow rate ISO 7183 A1: 0.6 m³/min Pressure dew point: 3°C Pressure loss: 0.07 bar Power consumption at 100% capacity: 0.29 kW Power consumption at 50% capacity: 0.17 kW Overpressure: 3 to 16 bar Ambient temperature: +3 to +43°C Maximum inlet compressed air temperature: 55°C Dimensions (W x D x H): 630 x 484 x 779 mm Weight: 70 kg Compressed air connection: G 3/4" Lhjdpfx Alow Ahykj Nsf Condensate drain connection: G 1/4" Electrical supply: 230 V / 1 / 50 Hz

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Eight identical label dispensers are available, speed: 0-80 m/min, throughput: 1000 labels/min, length: 700 mm, width: 320 mm, height: 500 mm, including accessories. Ledpfx Aoflmc Nol Nshf

Stanje: rabljeno, Leto izdelave: 1997, Delivery pressure: 7.5 bar Output capacity: 0.6 m³/min Motor speed: 3000 rpm Ledpfx Aswrztiel Njhf Total power requirement: 4 kW Machine weight: approx. 350 kg Space requirement: approx. 1800 x 650 x 1300 mm Equipment: - Kaeser TA5 refrigerated dryer - 180 liter compressed air receiver

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, 1 x Refrigeration Dryer Kaeser TA 5 Ledsv Tbuqspfx Al Nohf Year of manufacture: 2011 In as-new condition. With operating manual. (Photo to follow) The dryer can be inspected at our warehouse at any time.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vijačni kompresor model KAESER SK 19 z navpičnim rezervoarjem 750 l, rabljeni stroj, v odličnem delovnem stanju, moč motorja 15 KM (11 kW), maksimalni delovni tlak 10 bar, napetost 380/50 V. Lhodpfxoydiggj Al Nef

Leto izdelave: 2024, stanje: novo,

Stanje: novo, volumenski pretok: 0,984 m³/h, Atlas Copco G7FF 500 L Screw Compressor – NEW Specification: • Condition: New • Manufacturer: Atlas Copco • Output: 984 l/min • Main motor power: 7.5 kW • Tank capacity: 500 l • Maximum working pressure: 10.0 bar • Integrated refrigerated dryer • Electronic control of compressor operating parameters • Soundproof enclosure (only 67 dB) • CE compliant • User manual in Polish • Weight: 227 kg Additional information: • Manufacturer’s warranty available upon commissioning by an authorized Atlas Copco service provider Lhodpfx Alohkttpo Njf • Available within 7 working days