Vijačni kompresor

Kaeser SK22

Stanje: novo, Leto izdelave: 2022, Kaeser Screw Compressor SK 22 – 11 bar – Ex-Demonstration Unit – Free air delivery at 11.0 bar (g): 1.67 m³/min Total system power consumption at 11.0 bar (g): 13.7 kW Maximum overpressure: 11.00 bar Drive motor efficiency at full load: 91.2% Drive motor efficiency class: IE3 Drive motor rated power: 11.0 kW Drive motor speed: 2960 rpm Drive motor protection rating: IP 55 Ijdpfxjvk R Dco Aa Uoar Electrical supply: 400V / 3-phase / 50Hz Compressed air outlet temperature above ambient (at +20°C, 30% r.H.): 6 K Sound pressure level: 66 dB(A) Max. usable hot air volume: 2500 m³/h Compressed air connection: G 1 Coolant fill volume: 7.0 l Compressor coolant type: SIGMA FLUID MOL Dimensions (W x D x H): 750 mm x 895 mm x 1260 mm Weight: 312 kg Location: ex stock 54634 Bitburg – immediately available –

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Max. air flow: 840 m³/h Connection diameter: 200 mm Drive power: 0.55 kW Iaedpfxswmlgce Aa Usr Very lightly used, 2 units available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 31.796 h, Funkcionalnost: popolnoma funkcionalen, Vijčasti kompresor Kaeser SK22, 11 kW, 8 bar, s 2 m3/min. Letnik 2015. Ijdpfjxxt Dwjx Aa Uear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 2 h, številka stroja/vozila: 101955.01001, Razstavni eksponat takoj na voljo: Iaodpfxjxr Dmve Aa Uor Novi Kaeser SK 22 – vijačni kompresor 10 bar Krmiljenje: SIGMA CONTROL 2 Leto izdelave: 2025 Obratovalne ure: 2 h Tlak: 10 bar Nazivna moč: 11 kW Dobava: 1,68 m³/min Zvočna moč: 66 dB(A) Izstop stisnjenega zraka: 1" Dimenzije (D x Š x V): 750 x 895 x 1260 mm Teža: 312 kg Obratovalne ure: 2 h Za nove stroje je možen ugoden leasing preko naše hišne banke. (Tudi za stranke iz Avstrije in Švice) Obiščite našo trgovino. Vedno imamo na zalogi bogato izbiro novih in rabljenih kompresorjev!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 3.200 h, Funkcionalnost: popolnoma funkcionalen, natančnost ponavljanja: 0,01 mm, potovalna razdalja osi X: 3.002 mm, pomik osi Y: 1.502 mm, pomik po osi Z: 300 mm, natančnost pozicioniranja: 0,02 mm, teža obdelovanca (maks.): 4.500 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, maks. debelina aluminijaste pločevine: 300 mm, obratovalni tlak: 4.000 letvica, hitrost rezanja: 8.000 mm/min, moč servomotorja: 2.000 W, obremenitev mize: 4.500 kg, priključek za stisnjen zrak: 6 letvica, višina izdelka (maks.): 300 mm, moč: 37 kW (50,31 KM), Oprema: varnostna svetlobna zapora, Stroj: STM 1530 PremiumCut 3D s kompenzacijom kuta 12° Pumpa: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Odličnog stanja, potpuno funkcionalan, kupljen nov u listopadu 2018. Stroj se nalazi u EU, Zagreb, Hrvatska, mogući probni rez kod nas. Samo 3.200 radnih sati pumpe, automatska kontrola tlaka, automatska kontrola abraziva, kompenzacija kuta rezanja, mogućnost nadogradnje s rotirajućim stolom i jedinicom za bušenje za osjetljive materijale, izdržljiv strojni okvir (aluminijska legura + nehrđajući čelik), opremljen visokokvalitetnim komponentama. 1. Sustav vodenog rezanja STM 1530 PremiumCut 3D 12° kompenzacija kuta Robusna CNC glodana, apsolutno otporna na koroziju konstrukcija od aluminija i nehrđajućeg čelika Visokoprecizni robusni pogon zupčastom letvom i zupčanikom s kosim zupcima Premium vodilice X i Y osi s Bosch Rexroth™ s visoko preciznim kugličnim ležajevima i inox kuglicama Troslojni sustav zaštite od nečistoća Radno područje dostupno s 3 strane za jednostavno utovarivanje i istovarivanje Moguće rezanje pod vodom CNC glodani držač obratka s ojačanim okvirom za dijelove do 1.000 kg/m² Isporučuje se s potrebnim mazivima i posebnim alatima za održavanje i servis 1.1 CNC radni hod X os: ..... 1.502 mm Y os: ..... 3.002 mm (most) Z hod: ..... 300 mm A os: ..... 12° B os: ..... +/- ∞ 1.2 Preciznost i brzine pomaka Preciznost pozicioniranja: ..... ± 0,02 mm (po metru na 20°C) Ponovljivost: ..... ± 0,01 mm (po metru na 20°C) Maks. brzina pomaka: ..... 60 m/min Brzina pomaka A osi: ..... 360°/s Brzina pomaka B osi: ..... 360°/s 1.3 Dimenzije i masa Duljina: ..... cca 3.750 mm (uklj. visokotlačna cijev) Širina: ..... cca 4.700 mm Visina: ..... cca 3.400 mm (uklj. visokotlačna cijev) Težina: ..... 1.500 kg (bez vode) 2. Visokotlačna pumpa ECOTRON® 40.37 Maks. konstrukcijski tlak: ..... 420 MPa Maks. dozvoljeni radni tlak: ..... 400 MPa Maks. kontinuirani radni tlak: ..... 380 MPa Maks. protok: ..... 3,8 l/min Pogonska snaga: ..... 37 kW 2.1 Tehničke značajke Hidraulički pogon s aksijalnom klipnom pumpom i hidrauličkom regulacijom tlaka/protoka Zupčasta pumpa za zasebni rashladni/filterski krug Tlačni pojačivač s pogonskim cilindrom i visokotlačnim cilindrom Pulsacijski prigušivač 2,49 l prema Direktivi o tlačnoj opremi 97/23/EC Priključak za vanjski sigurnosni krug Električne i elektroničke komponente u ormaru za upravljanje Hidraulične i visokotlačne komponente na zajedničkoj osnovnoj šasiji Kompaktna izvedba, sve cijevi spojene i ožičene 2.2 Uključene opcije Automatska regulacija tlaka 50–400 MPa Hlađenje putem izmjenjivača topline ulje/voda Isdpfx Aasvla U Tj Ujar Ventil za rasterećenje tlaka s pneumatskim upravljanjem Povratni ventil na dovodu vode Dvostruki filter za prethodnu filtraciju vode Zvučna izolacija Posebni alati za montažu visokotlačnih brtvi, uključujući moment-ključ Ventil za zatvaranje vode Uključeno: stroj, visokotlačna pumpa, upravljačka jedinica (PC u elektroničkom ormariću), abraziv, rezervni dijelovi.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: MA0139_1335, Exhibition unit available immediately: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and air receiver tank Sigma Control 2 controller Iasdpfx Ajhwwyrea Ujr Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Air receiver tank volume: 350 litres Refrigeration dryer pressure dew point: +3°C Electronically controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Attractive lease financing for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.730 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, skupna dolžina: 1.335 mm, skupna širina: 750 mm, skupna višina: 1.880 mm, tlak (maks.): 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, raven hrupa: 66 dB, vrsta zaščite (IP koda): IP55, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective delivery rate: 1.67 m³/min Rated drive motor power: 11 kW Drive motor protection class: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1,335 x 1,880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration Dryer Power consumption: 0.49 kW Pressure dew point: 3 °C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment to EN 60204-1: Yes Scope of delivery: Ijdpexnnd Dofx Aa Uear – Complete original documentation – 2x RFID cards – 5 m supply cable with 32A plug

Stanje: novo, Thread diameter M3 - M16 metric Infinitely variable speed 250 rpm Operating pressure 6 - 8 bar Working range max. 1100 mm Weight 15 kg Dimensions L x W x H 700 x 280 x 250 mm Pneumatic Tapping Machine Version with adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M16 threads, adjustable angle 8 pcs. quick-change chucks with slip clutch Documentation in English! Iajdpfx Aaehiptgo Uor Optional: Clamping table with T-slots, type: FL-WB

Stanje: novo, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations or with welding robots. Functionality: The welding fumes generated at the worksite are captured, among other ways, via extraction arms and hoods and conveyed through ductwork to the intake nozzle of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are separated out. The subsequent filter cartridges, rated dust class 'M', then filter out the remaining fine particulates. During extraction operation, the differential pressure-controlled filter cleaning system removes adherent particles from the filter cartridges. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent extraction performance and a long filter lifespan. A flow monitoring system continuously supervises the required extraction rate and issues a warning if the target value is not met. The collected dust is deposited in an easily movable container. The purified air is returned to the room from the top of the unit. Applications: - Suitable for all welding tasks with unalloyed or low-alloy steels - Usable for extraction at individual welding stations and for duct systems with multiple extraction points - Extraction from fixed hoods and welding tables Iajdpfxowwkvqs Aa Usr Advantages: - Consistently high extraction performance thanks to an efficient fan and cleanable, long-life filters - Extremely quiet due to highly effective sound insulation - Suitable for individual workstations and connection to ductwork - IE3 motors for high energy efficiency - Broad range of capacities - Suitable accessories available for various welding applications

Stanje: novo, Oprema: odsesavanje prahu, For all industrial processes where dust and coarse particles are released, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly efficient filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and transported through a suction line to the AL-KO CLEAN UNIT D inlet. In a generously sized pre-separation chamber, coarse particles are separated out. The subsequent filter cartridges, classified as dust class “M,” remove the remaining fine dust. The differential pressure-controlled filter cleaning system cleans the filter cartridges of adhering particles even during operation. Venturi nozzles on the filter cartridges increase the cleaning effectiveness, ensuring consistent suction power and long filter life. Collected dust is deposited in an easily movable container with a disposable collection bag for low-dust disposal. The purified air is released back into the room from the top of the unit. Iodpfxewwkrfo Aa Uear Applications: - Direct extraction of dust and chips - For single or multiple extraction points - Suitable for connection to machines, extraction tables, booths, and ductwork - For metal and plastic processing, and many other industries - In grinding, polishing, filling processes, and much more Advantages: - High suction power thanks to an efficient fan and cleanable filters with long service life - Suitable for a wide range of applications - Extremely quiet due to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play