Kompresor

KAESER CSD 102 T

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 9.910 h, Funkcionalnost: nepreverjeno, delovna višina: 45 mm, delovna dolžina: 2.600 mm, TEHNIČNI PODATKI Največja delovna dolžina: 2.600 mm Največja delovna višina: 45 mm PODATKI O STROJU Fedpfx Abjyq Ez Hsvjpd Skupna priključna moč: 6,5 kW Obratovalne ure: 9.910 h Stroj se prodaja in dobavi v dejanskem in pravnem stanju („kot viden in sprejet“) na podlagi fotodokumentacije in tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico blago pred prevzemom pregledati in prevzema odgovornost za namestitev, varovanje ter uporabo stroja na destinaciji. Zunanja referenca: 6063

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, največja višina reza: 110 mm, dolžina obdelovanca (maks.): 2.200 mm, širina obdelovanca (maks.): 4.300 mm, Oprema: CE označba, DÉTAILS TECHNIQUES Largeur de panneau maximale : 4 300 mm Longueur de panneau maximale : 2 200 mm Hauteur de coupe maximale : 110 mm Vitesse d'avance maximale : 100 m/min Saillie maximale de la lame principale : 120 mm Nombre de pinces : 9 Unité de sciage Puissance moteur (unité de sciage) : 18 kW Puissance moteur (unité inciseur) : 2,2 kW Vitesse d'avance maximale : 150 m/min DÉTAILS DE LA MACHINE Fsdpfx Abjyqydcovjpd Système de commande : Windows XP Logiciel de programmation de la machine : OSI ÉQUIPEMENTS Changement rapide de lame de scie Deuxième poussoir flexible Station de rotation des panneaux Chargement de tôles minces Marquage CE La machine est vendue et livrée en l'état réel et juridique (« vue et acceptée ») sur la base de la documentation photographique et des documents techniques et commerciaux à titre descriptif. L’acheteur a le droit d’inspecter la marchandise avant son enlèvement et assume la responsabilité de l’installation, de la sécurisation et de l’utilisation de la machine sur le site de destination. Référence externe : 8158

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, premer cilindra: 85 mm, delovna širina: 1.400 mm, število valjev: 10, delovna dolžina: 4.000 mm, TEHNIČNI PODATKI Največja delovna dolžina: 4.000 mm Fodpfxeyqybho Abvopd Največja delovna širina: 1.400 mm Število stiskalnih cilindrov: 10 Premer cilindra: 85 mm PODROBNOSTI O STROJU Sistem ogrevanja: olje OPREMA Sistem s prednalagalnim trakom Sistem z izložbeno mizo Varnostni standard: CE oznaka Stroj se prodaja in dostavlja v dejanskem in pravnem stanju („videno in kupljeno“) na podlagi fotodokumentacije in tehničnih/komercialnih dokumentov opisnega značaja. Kupec ima pravico stroj pred prevzemom pregledati in prevzema odgovornost za namestitev, zavarovanje in uporabo stroja na ciljnem mestu. Zunanja referenca: 8212

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fpjdoyqx U Hopfx Abved Fixed grooving unit for grooves in X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2010, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 120 mm, širina obdelovanca (maks.): 230 mm, model krmilnika: Siemens Simatic Panel Touch, dolžina obdelovanca (maks.): 8.483 mm, TECHNICAL DETAILS Min. processing height: 6 mm Max. processing height: 120 mm Min. processing length: 370 mm Max. processing length: 8,483 mm Min. processing width: 25 mm Max. processing width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Fpodpfx Abeyqx T Asvjd Automatic chip discharge power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7243

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine positions: 18 Fpodpfjyttf Sjx Abvod Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X direction: 2 Number of spindles for horizontal drilling in Y direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Safety cover at the front The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel distance X-axis: 4,175 mm Travel distance Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Max. workpiece height: 40 mm Number of traverse beams with suction cups: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X direction: 10 Total number of spindles: 30 Milling Unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid cooled Saw Unit Tool Magazine 1 Number of slots: 18 Tool Magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Fsdoyttcwepfx Abvjpd The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7350

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Fpjdpfx Aboyttrxsvsd Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Fsdpfx Aeyqybuebvopd Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 700 mm, število vreten: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of storage units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-direction: 6 Number of spindles for horizontal drilling in X-direction: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Fpsdpfx Asyq Irhsbvod Motor output (vertical drilling): 3 kW Motor output (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents for descriptive purposes only. The buyer has the right to inspect the goods before collection, and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6106

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Leto izdelave: 2008, model krmilnika: HMI PLC KAESER, tlak (maks.): 8,5 letvica, največja hitrost vrtenja: 2.965 obr/min, TEHNIČNI PODATKI Št. vrtljajev motorja: 2.965 vrt/min Maksimalni delovni tlak: 8,5 bar Fpodpjyq Hi Eofx Abvsd Sušilnik zraka Model: ABT 102 Maks. delovni tlak: 21 bar PODROBNOSTI STROJA Model krmiljenja: HMI PLC KAESER Moč motorja: 55 kW Napetost: 400/460 V Stroj se prodaja in dobavlja v dejanskem in pravnem stanju („kot je viden in sprejet“), na podlagi fotodokumentacije ter tehničnih/komercialnih opisnih dokumentov. Kupec ima pravico, da blago pred prevzemom pregleda, ter prevzema odgovornost za montažo, zavarovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 7549

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1999, Funkcionalnost: nepreverjeno, delovna širina: 1.300 mm, delovna višina: 110 mm, TEHNIČNI PODATKI Največja delovna širina: 1.300 mm Največja delovna višina: 110 mm Najmanjša delovna višina: 8 mm OPREMA Motorizirani podajalni valji 2 krtačni enoti Stroj se prodaja in dobavi v dejanskem in pravnem stanju („kot videno in sprejeto“) na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije z opisnim značajem. Kupec ima pravico blago pred prevzemom pregledati in prevzema odgovornost za montažo, zavarovanje ter uporabo stroja na ciljni lokaciji. Fedpfjyqynuox Abvjpd Zunanja referenca: 7615

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, model krmilnika: POWERCONTROL, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.200 mm, hitrost pomika os X: 80 m/min, TEHNIČNI PODATKI Največja širina panela: 2.200 mm Največja dolžina panela: 4.300 mm Največji iztek glavnega žaginega lista: 125 mm Največja hitrost pomika: 80 m/min Žagarska enota Največji premer orodja: 450 mm Moč motorja: 13,5 kW Gravirna enota Največji premer orodja: 180 mm Moč motorja: 2,2 kW PODROBNOSTI O STROJU Fpodpfx Absyttqzsved Krmljenje: POWERCONTROL Obdelovalna miza Število nivojev dvižne mize: 4 Število vpenjalnih naprav: 10 Stroj se prodaja in dostavlja v dejanskem tehničnem in pravnem stanju („kot je viden in kupljen“) na podlagi fotodokumentacije in tehnične/komercialne opisne dokumentacije. Kupec ima pravico, da blago pred prevzemom pregleda, ter prevzema odgovornost za montažo, zaščito in uporabo stroja na ciljnem mestu. Zunanja referenca: 5552

Leto izdelave: 2006, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, delovna širina: 1.200 mm, delovna višina: 1.600 mm, delovna dolžina: 1.200 mm, Oprema: CE označba, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Največja delovna širina: 1.200 mm Največja delovna dolžina: 1.200 mm Največja delovna višina: 1.600 mm PODROBNOSTI STROJA Skupna moč: 1,5 kW OPREMA Oznaka CE, varnostni predpis Stroj se prodaja in dostavlja v dejanskem in pravnem stanju ('videno-kupljeno'), na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico blago pred prevzemom pregledati in prevzema odgovornost za namestitev, zavarovanje in uporabo stroja na ciljnem mestu. Fsdpfeyqx Ugex Abvopd Zunanja referenca: 6724

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna dolžina: 6.600 mm, skupna višina: 2.550 mm, skupna širina: 2.150 mm, moč: 48 kW (65,26 KM), TEHNIČNE PODROBNOSTI Dolžina vstopnega območja: 2.900 mm Širina vstopnega območja: 1.400 mm PODROBNOSTI O STROJU Fodpfsyq Izisx Abvepd Dimenzije Skupna dolžina: 6.600 mm Skupna širina: 2.150 mm Skupna višina: 2.550 mm Moč motorja rezalne gredi: 37 kW Skupna priključna moč: 48 kW Stroj se prodaja in dobavi v dejanskem in pravnem stanju („videno in sprejeto“), na podlagi fotodokumentacije ter tehničnih/komercialnih dokumentov opisnega značaja. Kupec ima pravico, da blago pred prevzemom pregleda, ter prevzema odgovornost za namestitev, zavarovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 8012

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, dolžina plošče: 2.800 mm, širina plošče: 1.300 mm, TEHNIČNI PODATKI Največja širina plošče: 1.300 mm Največja dolžina plošče: 2.800 mm Fpedpfxoyq E S Ss Abvod OPREMA Sistem za preklop plošč za 180 stopinj Stroj se prodaja in dostavlja v dejanskem in pravnem stanju ("kot viden in sprejet") na podlagi fotodokumentacije in tehnične/komercialne dokumentacije z opisnim značajem. Kupec ima pravico stroj pred prevzemom pregledati ter prevzema odgovornost za montažo, varovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 6327

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, moč: 25 kW (33,99 KM), višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, hitrost pomika os X: 18 m/min, Oprema: CE označba, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Max. feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge heater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting to size Number of motors: 2 Fsdpfeytr Rgex Abvepd Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total installed power: 25 kW EQUIPMENT Panel support guide Spraying unit Control system with more than 20 control options CE marking The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, število osi: 4, dolžina mize: 4.300 mm, širina mize: 2.200 mm, število vreten: 40, premer orodja: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Fpedoyq Ez Topfx Abvsd Table dimensions: 4,300 x 2,200 mm Number of positions tool magazine 1: 22 Number of positions tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT Automatic panel loading system Automatic panel stacking system Lift table Transport system Vacuum pump Note: The safety fences at the rear and at the loading table are missing and will only be delivered if available. The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documentation of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7087

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 6.200 mm, pomik osi Y: 1.935 mm, višina obdelovanca (maks.): 250 mm, število osi: 4, število vreten: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Fpsdpfx Aeyqzrnobvjd Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X direction: 4 Number of horizontal drilling spindles in Y direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction traverse beams: 10 Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of positions in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8011

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, glavni premer žaginega lista: 315 mm, premer orodja: 315 mm, Oprema: CE označba, dozator, TEHNIČNE PODROBNOSTI Premer glavnega žaginega lista: 315 mm Maksimalni premer orodja: 315 mm Fsdjyqyc Eepfx Abvspd PODROBNOSTI STROJA Enote krožne žage: 1 Priključna moč: 4 kW OPREMA Predrezkar Nagib CE označba Stroj se prodaja in dostavlja v dejanskem in pravnem stanju („kot je viden in sprejet“) na osnovi fotodokumentacije in tehničnih/komercialnih dokumentov opisnega značaja. Kupec ima pravico pregledati blago pred prevzemom ter prevzame odgovornost za namestitev, zavarovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 8118