Vijačni kompresor

Kaeser ASD 57 SIGMA

Stanje: pripravljen za uporabo (rabljen), Max. operating overpressure: 11 bar, motor speed: 2945 rpm, rated power: 30 kW, operating hours counter: 67,212 h. Kedel Eyq Ropfx Af Tedg

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, NP 684 | LINEA COMPLETA DI IMBOTTIGLIAMENTO PET KRONES 30.000 BPH Prodotto: Acqua naturale (con modifica al collo può imbottigliare anche acqua frizzante) Velocità: - 30.000 BPH con bottiglie da 0,5 lt - 30.000 BPH con bottiglie da 1,5 lt - 22.000 BPH con bottiglie da 2 lt Ore di lavoro: 56.000 Ribaltatore preforme M. Tanner AG: - Modello: VZT -4010 - Anno: 2004 Sistema di lavaggio preforme Krones: - Anno: 2004 Compressore ad alta pressione Ateliers Francois: - Modello: 20G282 - Anno: 2004 - Pressione: 40 BAR Soffiatrice PET Krones: - Modello: Contiform 20 - Anno: 2004 - Numero cavità: 20 - Stampi esclusi - Completa di alimentatore e orientatore preforme Elevatore e orientatore tappi Gassner: - Anno: 2004 - Tipo tappi supportati: Plastica prefilettata - Tipo: meccanico Elevatore e orientatore tappi Gassner: - Anno: 2004 - Tipo tappi supportati: Tappo sport - Tipo: meccanico CIP Steinecker: - Modello: Media - Anno: 2004 Stazione UV WEDEDCO: - Anno: 2004 - Trattamento acqua tramite raggi UV Monoblocco KRONES (composto da riempitrice e tappatore): - Modello: Isofill - Anno: 2004 - Direzione: Antioraria - Regolazione in altezza: elettrica Riempitrice: - 88 valvole - Tipo di riempimento: isobarico - Tipo valvola: meccanica - Degasaggio Tappatore: - 22 teste - Tipo tappi lavorabili: plastica prefilettata, tappo sport - Sistema di distribuzione pick & place Kedpjxl R Uasfx Af Tsdg Ispezionatrice bottiglie Heuft: - Modello: HBBVXTXXX - Anno: 2015 - Direzione bottiglia: da destra a sinistra - Tipo di controllo: sovrariempimento, sotto-riempimento, presenza tappo, tappo non allineato Nastri trasportatori bottiglie Krones: - Anno: 2004 Etichettatrice Krones: - Modello: Contiroll - Anno: 2019 - Direzione: oraria - Regolazione testa elettrica - 18 teste con camme meccaniche - 1 stazione alimentata a bobina – etichetta avvolgente - Controllo presenza etichetta Fardellatrice Variopac: - Anno: 2004 - Versione: Film Launch - Tipo: solo film Imballatrice Wrap Around Krones: - Modello: Wrapapac - Anno: 2004 - Sistema colla a caldo: Nordson - Bottiglie per scatola: 12x1,5L e 24 x 0,5L - Ore di utilizzo: 1000 Nastri trasporto fardelli/scatole Krones: - Anno: 2004 Handler Comag: - Modello: H 55/2 - Anno: 2004 - Doppia corsia Pallettizzatore Krones: - Modello: Pressant - Anno: 2004 - Tipologia prodotto da pallettizzare: fardelli, scatole - Tipo: a spinta - Magazzino pallet - Sistema interfalde - Doppio ingresso Fasciapallet Robopac: - Modello: HELIX HS 30 - Anno: 2004 - Tipo di fasciatura: braccio rotante - Prestiro

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 894126H, Condition: Very good condition // completely overhauled – new heating system Kedpsrigyzefx Af Tsdg Additional MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Stanje: novo, GENERAL A signature feature of the ZIS series single-shaft shredders is their spacious cutting chambers, whose stability is ensured by their heavy-duty welded steel construction. The rotor diameter is a generous 457 mm, and rotor widths are available in 1200, 1500, and 2000 mm options. The ZIS series retains all the benefits of the ZSS series: drive via an oversized gearbox, reversible knives, bolted knife holders, robust external bearings, hydraulic screen cradle, user-friendly operation, and advanced control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. In addition, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines in the ZIS series can be equipped with various wear-resistant options. ADVANTAGES - 35% larger cutting chamber volume compared to the ZSS series Kedpfxjghgdvs Af Tsdg - Internally positioned hydraulic pusher - Increased pusher speed in the return stroke - Compact dimensions - Bolted knife holders mounted in the rotor pockets

Leto izdelave: 2022, obratovalne ure: 20 h, Stanje: kot nova (razstavni stroj),

Stanje: dober (rabljeno), Leto izdelave: 2004, številka stroja/vozila: A II 151768, Offer 25979 - Operating hours: 16,550 h - Operating pressure: 10 bar - Delivery rate: 15.9 l/sec - Drive: 400 V / 7.5 kW Kodpswrcq Nefx Af Tedg - Motor speed: 3,000 rpm - Air receiver tank: 250 L - Required space: approx. W 700 x H 1,830 x D 1,050 mm - Weight: approx. 250 kg

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 20.000 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: GA11VSD+FF, Compressor compressed air system Atlas Copco Comprising: Compressor GA18 Plus, year 2007 Compressor GA11VSD+FF, year 2017 Control unit ES 6 Buyer is responsible for professional dismantling. Kdsdpfxovx Nmfs Af Tog Forklift will be provided.

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Kdedpfxet Iklkj Af Teg Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders Kdodpfx Aowlvlgef Tog • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Working area X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Includes Wenzel HT 400 manual control, computer with 2 TFT monitors, and Kyocera laser printer. Probe not included. Documentation available. On-site inspection possible. Kodpfxju T Rhzo Af Todg