Vijačni kompresor 8 bar 7,5 kW

Kaeser AIRCENTER SM 13

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 620 h, Funkcionalnost: popolnoma funkcionalen, Kaeser Aircenter SM13-11 Screw Compressor (2021) Manufacturer: Kaeser Model: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Operating hours: 1,356 h Load hours: 606 h Next service at: 2,825 h Technical specifications Pressure: 11 bar Effective delivery rate: 1.08 m³/min Rated motor power: 7.5 kW Motor protection class: IP 54 Bsdpfjxnnd Rjx Afqelr Power supply: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air receiver: 270 l Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure drop: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5 m power cable with 32A plug

Leto izdelave: 2024, Stanje: novo, Working chamber 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-proof negative pressure cabin in a robust sheet steel construction Work gloves Blsdpfxoh Hxubo Afqer Special rubber, wear-resistant, cotton lining on the inside, securely attached to the cabin to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight seal, double-walled, noise-insulated foam filling, lockable, with electrical safety interlock Abrasive recovery Via coordinated MHG recovery system Operation ON/OFF switch for extraction and lighting, pressure regulator, manometer, and foot switch Viewing windows

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, številka stroja/vozila: 101780.0, Ex-demo unit available immediately: New Kaeser Aircenter SM 13 - 10 bar screw compressor with integrated refrigeration dryer and air receiver Control system: Sigma Control 2 Year of manufacture: 2025 Operating hours: 1 h Pressure: 10 bar Rated power: 7.5 kW Bodpfov Ebl Tex Afqelr Free air delivery: 1.09 m³/min Sound level: 65 dB(A) Compressed air outlet: 3/4" Air receiver: 270 litre capacity Refrigeration dryer pressure dew point: +3°C Electronically level-controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 630 x 1220 x 1720 mm Weight: 440 kg Attractive leasing options for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Travel distances X/Y/Z: 900 x 400 x 200 mm Table size: 800 x 400 mm Bledjv Irwrjpfx Afqor

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: 15513, Polishing and grinding machine with versatile applications, from polishing high-gloss furniture fronts to grinding and polishing kitchen countertops. - Easy switching between polishing and grinding heads. - Equipped with tool head oscillation for a more uniform, higher-quality sanding or polishing finish. - With automatic part detection. Technical data: - Type: HBS 1600-750 (800) -100-1 - Year of manufacture: 2013 - Electrical connection: 400V, 50 Hz, 4.5 kW, 10 A - Compressed air: 5 bar - Conveyor belt: 1,600 mm x 940 mm - Only for rectangular parts - Workpiece width: 90 mm – 750 mm (up to 850 mm without tool bridge) - Workpiece length: 150 mm – 2,800 mm - Workpiece thickness: 8 mm – 100 mm (height extension possible) - Frame dimensions: 1,600 mm x 1,200 mm - Frame height: approx. 960 mm ± 25 mm - Frame material: welded steel tubing - Structures supported by aluminium profiles - Manual belt cleaning every 8 hours - Safety features: Emergency stop. If delivered without a housing, the machine must be enclosed by protective walls on site. - Polishing motor: 400V, 50 Hz, 0.75 kW, with planetary gearbox - Control system: Siemens/Vipa S7 PLC, parameters set via 7-segment displays, KEB frequency inverter - Control elements: ON/OFF, RESET, START/STOP, program interruption, polishing/grinding head speed, belt speed, and tool head oscillation speed - Tool bridge with polishing head consisting of a linear profile system, driven by pneumatic linear cylinders. - Without polishing shoe for polishing head - Location: in stock Bledeu Afu Depfx Afqsr PHOTOS shown are of an identical machine from the same year of manufacture

Stanje: dober (rabljeno), Leto izdelave: 2004, Spindle clearance: 60 mm Turning length: 280 mm Control: Siemens 840 D Main spindle speed: 6,300 rpm Drive power - spindle motor: 3.3 kW Turret 1: disc turret Number of tools in turret 1: 8 Tool system: DIN 69880 / 25 mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5,500 N Rapid traverse: 24 m/min Drive power - milling spindle: 5,000 kW Turret 2: dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5,500 N Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 24 m/min Machine weight approx.: 2.5 t Required space approx.: 6.0 x 2.0 x 2.0 m The INDEX ABC machine is a compact CNC lathe designed for short turning parts from bar stock. It features a slant-bed design with two independent turrets. The upper turret is primarily intended for internal machining and cutoff-side operations, while the lower turret is used for external machining. This turret arrangement ensures collision-free operation and easy programming with high tool availability. The large working area allows for optimal chip evacuation. The machining area includes two turrets: Bsdpfjwbvhasx Afqelr "Turret 1" - Disc turret with 7 radially arranged toolholders Ø 25 mm DIN 69880 and one mounting point for a reinforced synchronous spindle at station 8. With an adapter, tools with 1" mountings can also be used. The turret head is prepared for the V-guide bar system. - Synchronous spindle for rear-side machining, enabling parallel simultaneous machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back boring unit. Starting from the work spindle center in a clockwise direction, 3 stationary back boring tools are arranged. These are positioned on the pitch circle of the synchronous spindle. Rear-side machining takes place simultaneously with the main spindle machining. Additionally, two more tools can be mounted and can be equipped with live tooling. "Turret 2" - Turret with 6 symmetric dovetail mounts, each station featuring 2 holes for cylindrical shank tools. The following tool systems can be used: - Static tools, which can be shifted in the Z direction - Driven tools with cylindrical shank Ø25 (two positions per station) - Including bar feeder LM 3200 - + various accessories (various Ø guide half-shells/toolholders) Technical Data: - Bar stock diameter: (Ø 25 / Ø 36 / Ø 52): --> round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagonal SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Max. bar length: 3,200 mm --> From Ø 25 mm bar, min. 2,500 mm --> Up to Ø 25 mm bar, min. 1,500 mm --> Bar support = ca. 300 = 6 bars Ø 52 mm Weight (bar loader) = 700 kg

Leto izdelave: 1990, Stanje: nepreverjeno (rabljeno), Pressure: 125 tons (2 x 63) Infinitely adjustable working speed: 0–10 mm/sec Bjdpjgy Hzpjfx Afqelr Return speed: 20 mm/sec Clearance between uprights: 950 x 550 mm Table surface area, front access: 950 x 820 mm Table surface area, side loading: 1220 x 550 mm Ram surface area: see table dimensions Maximum installation height: 700 mm Stroke: 500 mm Weight: 5,500 kg Height: 2,900 mm Drive power: 18.5 kW 2 hydraulic cylinders with precision synchronous control Infinitely adjustable electronic stroke limitation

Stanje: skoraj kot novo (rabljeno), 2,000 m² Schäfer R3000 Mezzanine Platform, 2 Levels Used equipment, excellent condition, like new—see photos. Manufacturer: SCHÄFER R3000 CAD planning and assembly available. Price on request! Partial sale possible. Negotiation price: on request! Bedofiqhmspfx Afqolr Item is in stock and available immediately. Transport and assembly upon request. Inspection possible at any time by appointment. More information available upon request. Constantly over 5,000 running meters of pallet racks available from various manufacturers in stock. (Modifications and errors in technical data, specifications, and prices as well as prior sale reserved! See our T&Cs. All prices ex-works, excluding VAT.) Purchase / Sale: We are constantly looking for and offering numerous items from various sectors: - broom-clean facility clearances - business liquidations Quick, flexible, and efficient! We also clear or dispose for insolvency administrators. Write to us with a few keywords—we will get back to you promptly. To visit our page, please click on our logo!

Stanje: rabljeno, Leto izdelave: 2010, x-axis travel: 730 mm y-axis travel: 730 mm z-axis travel: 730 mm Control: Matrix Nexus Mazatrol Main spindle: Speed range – main spindle: 35 – 18,000 rpm Drive power – milling spindle: 35 / 26 kW Tool holder: ISO 40 DIN 69871A Number of gear stages: 2 Pallet changer: Number of pallets: 6 (5+1) Pallet size: 500 x 500 mm Max. workpiece weight: 700 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Bljdsup H Drspfx Afqsr Pallet change time: 7 sec B-axis (table): 0.001° Tool changer: Number of tool stations: 160 positions Tool holder: ISO 40 DIN 69871A Max. tool diameter: 95 mm Max. tool diameter with adjacent empty pocket: 150 mm Max. tool length: 420 mm Max. tool weight: 12 kg Tool-to-tool change time: 2.7 / 3.2 sec Feed rates: Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Total power requirement: 78.5 kVA Machine weight approx.: 16.4 t Space requirements approx.: 7.5 x 3.5 x 3.0 m CNC horizontal machining center MAZAK – Nexus 5000 II - Pallet changer 6 (5+1) positions - WITHOUT tools

Stanje: novo, For grinding HSS and carbide engraving cutters, as well as single- or multi-fluted end mills in various shapes, such as radius cutters or cutters with a negative conical angle. The universal indexing head is provided with 24 positions so that any specific angle of form can be achieved; a free rotation of 360° or 10° is allowed for grinding end mills, twist drills, and lathe tools. Simply replace the attachment on the indexing head to switch between tools, without complex assembly required. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding wheel ×1 Twist drill grinding attachment ×1 End mill grinding fixture ×1 Lathe tool grinding fixture ×1 Options Collets: Ø3, Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. collet capacity Ø3 - Ø18 mm Blodpfxoq E Ry Hj Afqer Max. grinding diameter Ø18 mm Conical angle 0~180° Relief angle 0~45° Negative angle 0~25° Speed 5300 rpm Grinding wheel Ø100 x 50 x Ø20 mm Motor 375 W Dimensions 550 x 460 x 490 mm Weight 51 kg