Valjčni brusilni stroj

Jones & Shipman 1300

Stanje: rabljeno, Leto izdelave: 2007, Maximum gear cutting diameter: 2000 mm Workpiece diameter: 2700 mm Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Fgodsv E R Eispfx Aa Hsk Maximum table load: 20,000 kg Center distance: 70–1220 mm Stroke length: 30–330 mm Stroke rate: 10–200 strokes/min Total power requirement: 138 kW Machine weight: approx. 38 t Space required: approx. 11 x 5 m Machine: Fully CNC-controlled machine with electronic gear synchronization for C and D axis, equipped with digital INDRAMAT drive technology. Self-rigid machine bed of welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around design, Longitudinal guide with roller recirculating shoes. Precision-ground, preloaded ball screw with backlash-free preloaded nut. Digital AC drive technology featuring backlash-free transmission. Linear measuring system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded double worm gear, index wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Through table bore diameter 500 mm, open at the bottom. Water-cooled digital AC servo motors. Machine must be installed on a foundation. Column: Machine column as high-rigidity cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide, and wrap-around roller recirculating shoes. Precision-ground ball screw with backlash-free preloaded nut. Digital AC drive technology. Rotary encoder for axial positioning. Gear shaping head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and cutter relieving, stroke length 330 mm, shaping spindle diameter 160 mm. Hydrostatically mounted shaping spindle, straight guiding and lateral guiding for relieving motion. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Stroke numbers from 10 – 200 strokes/min, stroke speed from 5 – 45 m/min. Shaping spindle speeds for working and return stroke can be programmed independently. Within the cutting area, the spindle speed remains constant. Cutter wheel speed max. 10 rpm, digital AC drive technology. Cutter relieving direction for internal and external gear cutting can be manually reversed. Lateral offset of the shaping spindle axis up to max. 50 mm off machine center, manually adjustable, to prevent cutter wheel collision during return stroke.

Stanje: zelo dobro (rabljeno), TECHNICAL SPECIFICATIONS Capacity: Table diameter: 3,000 mm Maximum turning diameter: 3,110 mm Maximum workpiece weight: 20 t Spindle speed: 1.5–39.5 rpm Main motor power: 45 kW Crossrail travel: 1,200 mm Height under crossrail: 1,800 mm Fgedpfx Ajr Ddu Doa Hok Vertical lathe with two rams: Right carriage: pentagonal turret with 5 positions and automatic indexing X-axis travel: 1,500 mm Z-axis travel: 965 mm Left carriage with RAM: X-axis travel: 1,500 mm Z-axis travel: 1,200 mm Remarks: Independent control panel 2 x Fagor 8055 CNC for control of both carriages from a single screen Grinding head (optional) Year of manufacture/rebuild: 1975/2001

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - 8-OSNI CNC STRUŽNICA Z REZKALNO GLAVO, SPODNJO REVOLVERSKO GLAVO IN KONTRA VRETENOM MAKS. PREMER VRTENJA: 660 mm MAKS. DOLŽINA STRUŽENJA: 1495 mm MAKS. PREMER STRUŽENJA: 660 mm PREMER PALICE: 65 - 65 mm VRETENO: 35-5000 vrt./min; 22 kW; 254 mm KONTRA VRETENO: 35-5000 vrt./min; 18,5 kW; 254 mm GLAVA: CAPTO C6; -30°+195°; 15-12000 vrt./min; 18,5 kW HOD OSI X: 580 mm HOD OSI X2: 150 mm HOD OSI Y: 160 mm HOD OSI Z: 1545 mm HOD OSI Z2: 1490 mm HOD OSI B: 1550 mm HITRI POMIKI X-Y-Z: 38 - 26 - 38 m/min REVOLOVERSKA GLAVA: 9 POZICIJ MAGAZIN ORODIJ: VERIŽNI TIP; 80 POZICIJ VISOKOTLAČNO HLAJENJE: 18 Bar KRMILNA ENOTA: MAZATROL MATRIX TEŽA: 11800 kg SKUPNE DIMENZIJE: 5090 x 3270 x 2830 mm Fsdpow Ey R Hofx Aa Hsgk OPREMA: TRANSPORTER OSTRUŽKOV; PAPIRNI FILTER; NASTAVLJALEC ORODIJ

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.139 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 599 mm, premer struženja: 530 mm, moč vretenovega motorja: 11.000 W, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 6.000 obr/min, izvrtina vretena: 56 mm, potovalna razdalja osi X: 530 mm, pomik osi Y: 100 mm, pomik po osi Z: 599 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, Stunning machine with potential integration for a brand new IEMCA Master 52 bar feeder, only 1,100 operating hours. Multitasking capabilities enable simultaneous milling and turning operations. The machine features a robust, high-precision cast iron frame. Double tool magazine: Revolver turret + internal magazine with 12 additional protected CAPTO tools, 12 more tools mounted on the turret, plus 6 hybrid 25 mm square holders (refer to the attached technical datasheet). Equipped with dual spindles for secondary machining operations. Controlled by Fanuc 0i-TF CNC with Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Supplied with complete documentation. Also comes with transformer, chip conveyor, 15 Bar high-pressure coolant pump, tool presetting system, piece handling arm, finished parts conveyor belt, and work lamp. Fodevv Tvfspfx Aa Hegk

Stanje: rabljeno, Leto izdelave: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module - max.: 5 Module - min.: 1 Control unit: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: LIEBHERR CNC-controlled gear grinding and profile grinding machine Model: LCS 282 Year of manufacture: 1999 # 1099 ----- Fodpfot Hwu Aex Aa Hsgk Max. workpiece diameter: 280 mm Module: 1 - 5 Helix angle: +/- 35° Distance from table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shifting/traversing stroke: 200 mm Minimum number of teeth: 7 Grinding spindle position above table (min./max.): 70 - 360 mm Clamping length of workpiece: 420 up to max. 620 mm Worm grinding wheel / profile grinding wheel diameter: 145 x 210 / 175 mm Speed of worm wheel/profile tool: 2,500 – 10,000 rpm Maximum table speed: 750 rpm Spindle drive: 28 kW Total drive capacity: approx. 50 kW – 400 V – 50 Hz Total weight: approx. 12,000 kg Accessories / Special Features • LIEBHERR CNC control system Type LH 90 GG, a user-friendly CNC control (B+R / IPC 5000) with gear-specific operator interface and diagnostic functions for quick troubleshooting. (Remote diagnostics possible) • Equipped with automatic threading device for positioning the grinding wheel in the tooth gap • The machine operates with three grinding processes: a. Generating grinding using CBN worm wheels = fastest processing b. Profile grinding using CBN profile grinding wheels (one or two wheels) = highest accuracy! c. Combination of a and b (most economical solution): pre-grinding with worm wheel / finish-grinding with profile grinding wheel by single part method • Automatic shifting of worm grinding wheel and automatic positioning of profile wheel • Automatic workpiece loading via a ring loader mounted on the counter column, which automatically loads and unloads raw and finished parts. Workpieces are transported to the ring loader via a separate FLEX LINK conveyor, picked up, and removed again. Thus, unmanned operation is possible. • Hydraulic workpiece clamping on the table, but without clamping device. Tailstock slide present on counter column, but without tailstock. Slide stroke up to approx. 350 mm • Completely enclosed work area with sliding door and separate CO2 fire extinguishing system/IR sensor • No original coolant system (due to central supply), and no dresser provided. Condition: good to very good – under power and ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice We appreciate your interest – over 200 gear machines constantly in stock.

Stanje: novo, Leto izdelave: 2025, - Tfon Leveltech® TF M-5516 Stroj za ravnanje TF M-5516 je zasnovan za natančno ravnanje in učinkovito obdeluje materiale debeline od 1 do 15 mm, z naprednimi funkcijami za optimalno zmogljivost in enostavno uporabo Fgodpfx Aaekyrqfs Hjk - Ključne tehnične specifikacije - Debelina materiala: 1 – 15 mm - Največja širina materiala: 1.600 mm - Najmanjša dolžina materiala: 110 mm Sistem hitre menjave izravnalnih valjev: standard Nastavitev reže za sploščenje: servo hidravlična / PC nadzorovana Zaščita pred preobremenitvijo: standard Upravljalni zaslon: zaslon na dotik Dimenzije stroja (D × Š × V): 3.500 × 2.905 × 1.950 mm Skupna masa: 19.000 kg.

Stanje: dober (rabljeno), Litoželezni podstavek – talna plošča Uporabna površina (D x Š x V): 3600 x 1200 x 300 mm 4 T-utorji: širina 44 x 26 mm Opremljena z nivelirnimi nogami Fgedpfxeh Auahj Aa Hek Teža: pribl. 3 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, x-travel 14,000 mm y-travel 5,000 mm z-travel 1,500 mm w-axis 3,000 mm Column clearance 4,000 mm Gantry column: Distance table – spindle nose 4,500 mm Workpiece weight 100 t Table dimensions – longitudinal 9,000 mm Table dimensions – cross 3,000 mm Spindle taper ISO SK 50 Spindle speed 2–2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1–10,000 mm/min Feed range y-axis 1–10,000 mm/min Feed range z-axis 1–10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Fgodpsvwgm Hjfx Aa Hjk Control SIEMENS 840C Machine weight approx. 360 t >>> retrofit 2011

Stanje: dober (rabljeno), Leto izdelave: 2007, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Fjdpfxeucl Alo Aa Hegk Control: Heidenhain Plus Max. turning diameter: 600 mm Distance between centers: 1,250 mm Swing diameter over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range – main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 stations Total connected load: 42 kVA Machine weight: approx. 5.0 t Space requirements: approx. 3.6 x 2.14 x 1.95 m Accessories: coolant gun, Schunk chuck 315 mm, tailstock MK 5

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm Fgedpfx Ajt Hwwqea Hek - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another