Električni viličar

JMG MC 250.09FL

Stanje: rabljeno, skupna dolžina: 6.520 mm, Leto izdelave: 2026, dvižna višina: 2.470 mm, nosilnost: 25.000 kg, - Charger Manufacturer: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - Rear carriage with two independently rotating groups Nsdsztgm Uopfx Abijlg - Front axle drive with counter-rotating movement - High free lift mast - Removable counterweights - Extendable rear group: 7,720 mm - Max fork lifting capacity with rear group extended: 25t@0.9m - Max fork lifting capacity with rear group retracted: 16.5t@0.9m - Drive: Front axle drive with counter-rotating movement, 2 x AC electric motors 12 kW 96V - Total weight with forks: 25,000 kg - Total weight with jib: 25,000 kg - Fork carriage and fork arm: 3,000 kg - Crane mast weight: 3,000 kg - Removable counterweight: 6,000 kg - Battery: 96 V - 1,050 Ah - Service brake: hydraulic with foot control - Parking and emergency brake: hydraulic with automatic control - Steering: via rear axle - Parking and emergency brake: hydraulic with automatic control - Mast tilt angle: +12° / -7° - Motor: 1 x AC electric pump, 35 kW 96V

Stanje: dober (rabljeno), Manufacturer: MBT Model: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Housing dimensions: 3500 x 1000 x 2200 mm Nlodpfx Abohzr U Ieisg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 50 h, nosilnost: 25.000 kg, dvižna višina: 2.600 mm, prosto dvigovanje: 1.100 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.900 mm, širina nosilnega okvirja vilic: 1.800 mm, dolžina vilic: 2.400 mm, lastna masa: 25.000 kg, skupna dolžina: 4.120 mm, vrsta pogona: Elektro, gradbena širina: 1.800 mm, Heavy-duty forklift - Electric Load centre: 900 Fork width: 1,800 mm Njdpfjwwyx Iex Abielg Fork thickness: 100 mm ISO class: Pin-type Mast type: Duplex Condition: As new Technical condition: Very good Hydraulic fork positioner, cab, joystick control, remote control

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC profilna vrtalna naprava Voortman s premično vrtalno kabino. Delovni višinski razpon: 30mm-1050mm, hitrost pozicioniranja: 40m/min, širina mize: 300mm, največja delovna širina: 1800mm, globina nosilca: 1500mm, število mest za orodje: 5, največja hitrost premikanja: 40m/min, vpenjanje orodja: SK40, razpon premera vrtanja: 5mm-40mm, območje rezanja navojev: M6-M30, delovna dolžina: 16200mm. Na voljo je dokumentacija. Ogled na lokaciji mogoč. Nodpfxsxp Rb Is Abislg

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 252.000 km, prva registracija: 07/2015, vrsta goriva: dizel, konfiguracija osi: 8x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, dolžina tovornega prostora: 6.100 mm, Leto izdelave: 2015, obratovalne ure: 2.708 h, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, navigacijski sistem, parkirni grelec, spojka prikolice, tempomat, žerjav, = Nadaljnje možnosti in dodatna oprema = - Aluminijasti rezervoar za gorivo - Ojačevalnik zavorne sile - Nizka raven hrupa - Omejevalnik hitrosti - Hladilnik - Lita platišča - Zračno vzmetenje - Zračni hupa - Radio/CD predvajalnik - Kamera za vzvratno vožnjo - Sončna zaslonka - Pomožno gretje - Ksenonske luči - Kardanska gred (PTO) - Centralno mazanje - Vlečna kljuka = Dodatne informacije = Nsdjutkz Aepfx Abielg Konfiguracija osi: Sprednja os 1: LM platišča; vodljiva Sprednja os 2: LM platišča; vodljiva Zadnja os 1: LM platišča; vzmetenje: zračno vzmetenje Zadnja os 2: LM platišča; dvižna os; vodljiva; vzmetenje: zračno vzmetenje Teže: Lastna masa: 19.355 kg Nosilnost: 15.645 kg Dovoljena skupna masa: 35.000 kg Funkcionalnost: Dvignilna roka: EFFER 395-8S, letnik 2015, za kabino Znamka nadgradnje: EFFER 395-8S CE oznaka: da Stanje: Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: dober (rabljeno), Okvir: 8800 x 1050 x 80 mm, 32 kosov Prečne letve: 1860 x 75 x 45 mm (2800 kg/enoslov), 352 kosov Nljdped Hbqnofx Abisg Na voljo so tudi posamezni deli. Če potrebujete police ali dodatno opremo v drugačnih konfiguracijah ali izvedbah, nas prosimo kontaktirajte. Ponujamo obsežen program novih in rabljenih polic ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Individualna ponudba, prilagojena vašim potrebam, je za nas samoumevna. Dostava: Prosimo, da za povpraševanje o stroških pošiljanja navedete svojo poštno številko in kraj ter želeno količino artiklov.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Nsdpfsy Tmhzjx Abislg Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 17,65 kW (24,00 KM), vrsta goriva: bencin, gorivo: super 95, vrsta prenosa: drugo, Leto izdelave: 2023, AGRIA 9600 - 112 !!! 2. generacija – nov model !!! Daljinsko vodena kosilnica na gosenicah s 112 cm mulčerskim kosilnim krovom Ta kosilnica AGRIA 9600-112 je letnik 2023, ima le 304 delovne ure po števcem in je v zelo dobrem splošnem stanju z običajnimi sledovi uporabe in obrabe. Servis je bil pravkar opravljen. Trenutna prodajna cena znaša 44.900,-€. Neto cena je 26.806,-€ // Bruto cena 31.900,-€ - Ogled / testna vožnja je mogoča! - Pošiljanje po vsej državi stane 400,-€ (preko špediterja)! - Financiranje / leasing je možno urediti individualno! Nsdpfxsxa Ar Tj Abiolg

Stanje: dober (rabljeno), Leto izdelave: 1998, Press force: 315.00 t Stroke: 500 mm Throat: 425 mm Daylight (table to ram, stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Speed up: 330 mm/s Working speed: 19 mm/s Oil volume: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE standard. Nlodpfxov Rwu Us Abijg Equipped with oil-hydraulic drive, controllable dependent on pressure/time and stroke, front light curtain (Sick), two-hand operation.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Loading, unloading, drive-in, mobile ramp 10-ton ramp, 2 m width by TM-GROUP ONE OF THE BEST CHOICES ON THE MARKET ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 15 tonnes - Internal ramp width: 2150 mm - Ramp guardrails on both sides - Ramp wheels for easy movement - Central handle for relocating the ramp with a forklift - Adjustable incline angle and flap height - Movable ramp elements equipped with lubrication points - Ramp winch included - Custom ramp dimensions available for an additional charge - Motorised height adjustment available (optional) - ! IMPORTANT: PLEASE SELECT THE TAPER WIDTH BASED ON THE MINIMUM USABLE WIDTH ! Nedpfx Asmt D Sbsbislg ✅ Drive-on grating: - Galvanised grating with anti-slip grooves. Provides a reliable and secure base. Optimal traction and solid support are ensured for both forklift and pedestrian traffic. ✅ Forklift handles (mountable on both sides): - Quick and convenient attachment to a forklift enables transport of the ramp in all directions. The specially designed handle allows for precise manoeuvring, even in tight spaces. ✅ Additional adjustable or fixed safety supports: - Workplace safety is paramount – the ramp is equipped with a support system known from semi-trailer trucks. Sturdy legs guarantee stable positioning under load. ✅ Chain for connecting to truck, trailer or fixed warehouse ramp: - A robust steel chain is another benefit of our ramp, with the securing mechanism preventing ramp movement during loading operations. ✅ Solid side barriers: - Safety barriers with the option to remove or install a frame/roof (roof option available). ✅ Electric ramp height control: - Smooth electrohydraulic lift powered by a high-quality 230 V pump. ✅ Dual-action manual pump: - Hydraulic pump for height adjustment when mains supply for electrohydraulic operation is not available – can be operated from both sides. ⭐️ We offer the following variants:⭐️ - Entry width in 1900–2000 mm, 2150 mm and 2500 mm PREMIUM. - Mobile ramp models with capacities of 10, 15, 20 and 25 tonnes PREMIUM. - Grating thickness 3–5 cm. - Colours: red, blue, black. - Mobile ramp available with tarpaulin.