Teleskopska delovna ploščad

JLG 520AJ Valid inspection, *Guarantee! Diesel, 4x4 Dr

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 2.485 h, številka stroja/vozila: 0300212166, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Lastna teža: 10.850 kg Dvižni steber: vrtljiv pregibni krak Dvižna zmogljivost: 230 kg Delovna višina: 2.050 cm Maks. horizontalni doseg: 1.210 m Transportne dimenzije (D x Š x V): 8,55 x 2,45 x 2,85 Za dodatne informacije kontaktirajte skupino PFEIFER. Pgsdpfstr Itbjx Adyog

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Pedpfxsfg E Hls Adyjgg Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel Podped Iipmofx Adyjgg • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: rabljeno, moč: 74 kW (100,61 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, dvižna višina: 9.000 mm, Leto izdelave: 2014, obratovalne ure: 6.223 h, Lastna teža: 7.980 kg Znamka motorja: Deutz Dvižna kapaciteta: 3.200 kg Serijska številka: 941017 Stanje sprednjih pnevmatik: 80% Stanje zadnjih pnevmatik: 80% Transportne mere (D x Š x V): 4,7 x 2,34 x 2,3 m Pgodpfxetr Iqce Adyjg Za več informacij kontaktirajte skupino PFEIFER.

Leto izdelave: 2009, Stanje: dober (rabljeno), Lifting capacity: 30 t Precision lift Lifting height: 9 meters Pjdpjqiz N Refx Adysgg

Stanje: rabljeno, Leto izdelave: 1983, Proizvajalec Wohlenberg ponuja model 137 EMC iz leta 1983. Ta stroj ima format 1370 mm in je trenutno v uporabi v tiskarni v Nemčiji. Cena stroja je na voljo na zahtevo. Posebnosti vključujejo zračno mizo, dvigalo desno in levo ter programabilni vmesnik. Format: 1370 mm Oprema: Zračna miza Dvigalo desno in levo Programabilni vmesnik Psdpfx Adov I U A Djysgg

Stanje: novo, Leto izdelave: 2025, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje. Psdpfxedrtalj Adyjgg

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Pjdetwm Ubepfx Adyjgg Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: novo, Leto izdelave: 2025, skupna širina: 1.000 mm, skupna dolžina: 1.600 mm, skupna višina: 950 mm, moč: 1,5 kW (2,04 KM), Maschine zur Herstellung von Dachelementen F3-27 mit Clip-Relief Die OOO „Evolutioner“ hat die Dachpaneel-Profiliermaschine F3-27 mit Clip-Relief speziell für die Produktion von Dächern mit doppelstehender Falzprofilierung entwickelt. Das Stehfalz-Dach wird häufig beim Bau verschiedenster Gebäude und Konstruktionen sowie bei der Sanierung historischer Häuser und architektonischer Objekte eingesetzt. Das Stehfalzsystem verleiht dem Dach ein ansprechendes Erscheinungsbild und unterstreicht dessen Einzigartigkeit sowie das architektonische Design. In der modernen Architektur dienen Stehfalzpaneele oft auch zur dekorativen Gestaltung von Fassaden an diversen Gebäuden. Die Profiliermaschine F3-27 ermöglicht das Formen von Metall-Dachpaneelen beliebiger Länge – die Umformlänge ist unbegrenzt. Die Maschine ist äußerst leicht und daher unmittelbar am Montageort des Daches einsetzbar, sodass die Profilierung der Elemente direkt vor Ort erfolgen kann. Somit entfällt der Transport der fertigen Dachpaneele von der Werkstatt zum Bauort, wodurch das Risiko von Transportschäden sowie Transportkosten erheblich reduziert werden. Technische Daten: Profilierlänge – unbegrenzt; Anzahl der Umformstationen: 7; Schlosshöhe (mm): 27 Pgsdpfxsp Stgno Adyeg Die Metall-Dachpaneelmaschine F3-27 verfügt über ein einfach verstellbares System zur Breitenanpassung – zur Einstellung der Paneelbreite muss lediglich ein spezielles Handrad gedreht werden. Als optionale Ausstattung zur F3-27 Profiliermaschine sind erhältlich: - Querschneidemesser - Längenmessgerät - Sickenwalzen - Radienwalzen - manuelle Falzzangen - elektrische Falzmaschine ESM-1 - Schiebeclipformer - Festclipformer - Fußabwickelhaspel - Sickenpaneel-Profiliermaschine RPFM - automatische Schere mit Automatiksystem Die mobile Dachpaneel-Profiliermaschine F3-27 ist mit sechs Walzenpaaren ausgestattet, um eine Profilhöhe von 27 mm herzustellen. Ein zusätzlicher Ständer ermöglicht das Einbringen eines Clip-Reliefs. Das Clip-Relief ist eine spezielle Biegung am Paneel, die dazu dient, Schiebe- oder Festclips abzudecken. Diese Clips werden zur Befestigung der Dachpaneele am Dachrahmen verwendet. Darüber hinaus produzieren wir folgende Metall-Dachpaneelmaschinen: Stehfalz-Dachmaschine F3; Dachpaneel-Profiliermaschine F3-9 mit Clip-Relief; Snap-Lock-Dachpaneel-Profiliermaschine SL-1; automatische Snap-Lock-Dachpaneelmaschine SL-1 auto.

Stanje: novo, Leto izdelave: 2024, Genie Z34/22 IC diesel articulated boom lift, new, used, and demo machines available Pgsdpfxornqq He Adyjg