Kolesni nakladalnik

JCB 406 t4 * RADLADER * 4x4 * TOPZUSTAND

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 78 kW (106,05 KM), vrsta goriva: dizel, Leto izdelave: 1992, obratovalne ure: 10.027 h, Oprema: kabina, Tyre size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22,000 kg Load hook: 20,000 kg Boom configuration: Upper part 3,500 mm / Lower part 3,500 mm / Intermediate section 3,000 mm / Intermediate section 1,500 mm Base unit: with 4-point sliding beam support Engine manufacturer / model / power: Deutz / F6L 912 / 78 kW Bjdervgyxepfx Afnewi Max. load capacity: 25,000 kg Boom length: 11,500 mm

Stanje: rabljeno, Funkcionalnost: nefunkcionalno, Leto izdelave: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the vehicle’s rear tailgate, which enabled the military to transport a truck or other military equipment. The "XV" following LARC indicates the maximum payload capacity: 15 tons. The vehicles are constructed from aluminum and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (US measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins eight-cylinder diesel engines, each producing 300 HP. On land, they could reach a maximum speed of 48 km/h, and in water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight is 35.5 tons. The previous owner intended to convert the boats to fully electric propulsion in order to offer sightseeing tours in the Wadden Sea. Bwjdpfx Aoxcgy Hofnji Approximately €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. It is not known exactly what work still needs to be completed.

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.308 h, moč: 27 kW (36,71 KM), Oprema: kabina, pogon na vsa štiri kolesa, * Prednja hidravlika * Pogon na vsa štiri kolesa * Pnevmatike za travnate površine * 1308 delovnih ur ----Interna številka vozila 10178-----Pridržujemo si pravico do napak in vmesne prodaje Na voljo je podpora prek WhatsAppa! Za vprašanja o vozilu ali dodatne informacije nam pišite kar prek WhatsAppa Bwodpfx Afoxnvgajnsi WhatsApp WhatsApp

Stanje: novo, Leto izdelave: 2026, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It is perfect for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as threading up to M12 mm. Thanks to its milling capacity of up to 80 mm in width and keyway milling up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features automatic spindle feed, increasing work efficiency. Additionally, it is equipped with digital readout for enhanced operational accuracy and a cooling system to maintain optimal temperature during processing. The machine is ready for immediate use and available from stock. Ideal for professionals seeking high quality and performance in metalworking. Product features: - HEAVY, STABLE CAST IRON BASE - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT ON THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - SWIVEL HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available TECHNICAL DATA: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face milling cutter diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) Spindle taper: MT 4 Bodpjud H H Usfx Afnowi Spindle feed: 125 mm (automatic feed) Table size: 820 mm x 240 mm Base dimensions: 580 mm x 600 mm Max. spindle-table distance: 445 mm Spindle-column distance: 260 mm Traverse X/Y/Z: 515/175/430 mm Quill feed rate: 0.12; 0.18; 0.25 mm/rev Head swivel left/right: 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 350 kg Available equipment: - MK4/B18 drill chuck arbor - Digital readout - Hand tools - Drill chuck 3–16 mm/B18 - MK4/MK3 reducing sleeve - MK3/MK2 reducing sleeve - Operating instructions in English

Stanje: rabljeno, prevoženi kilometri: 3.329 km, moč: 11 kW (14,96 KM), prva registracija: 07/1995, vrsta goriva: dizel, skupna masa: 1.700 kg, barva: rdeča, vrsta prenosa: mehanski, vzmetenje: drugo, obratovalne ure: 3.329 h, Diesel, year of manufacture 1995, 3,329 operating hours according to the tachometer, 11 kW, 3rd hydraulic circuit, hydrostatic drive, crocodile grab bucket, fully functional, permissible total weight 1,700 kg. FOR US, CONDITION AND GUT FEELING ARE CRUCIAL, PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the following number. //*TRADE-IN, PART EXCHANGE OR COLLATERALIZATION OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* More offers can be found on our homepage. The description and stated data do not constitute an assurance and are not binding. The only binding agreement is the purchase contract concluded at the dealership upon purchase of the vehicle. Errors and prior sale excepted! Bwsdpfjvida Iex Afnsi

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 1 km, moč: 5 kW (6,80 KM), barva: siv, skupna masa: 2.150 kg, obratovalna teža: 2.150 kg, dvižna moč: 1.000 kg/m, dvižna višina: 3.120 mm, velikost pnevmatike: 29*12.5-15, emisijski razred: noben, širina izkopne žlice: 1.200 mm, Leto izdelave: 2025, obratovalne ure: 1 h, Oprema: hidravlika, kabina, klimatska naprava, nizka raven hrupa, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, Motor: YQP5.72AF.48P Bwodpfovcl T Njx Afnsi Motor power: 5000 Watt Battery: 72V 200Ah Standard tire size: 29*12.5-15 Drive: 4-matic Additional features: 1 Lifting capacity: 1000 kg Own weight: 2150 kg Speed: 12 km/h Hydraulic flow: 27 L/min Working pressure: 160 bar

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 2.100 h, moč: 37 kW (50,31 KM), največja hitrost: 20 km/h, Delovne ure: 2100 z zaščitno streho ROPS za voznika Dizelski motor Kubota D1803-CR-T 37 kW = 50 KM Zadnja utež-koncna plošča Hitra vožnja 20 km/h Bwjdpfx Afexmrvuenei Hidravlično zaklepanje orodja Sistem zadrževanja Posebna oprema: Zadnji del s širšimi blatniki Kovček utež 100 kg Pnevmatike 15.0/55-17 AS, 6 lukenj, ET -45 Ojačana zobniška črpalka 19 ccm (zahtevan motor 37 kW) Set LED delovnih žarometov, 800 lumnov (2x spredaj in 1x zadaj) Okvir za pritrditev Euro-WS Hidravlično zaklepanje Vlečna naprava s sornikom in pritrdilnimi obročki Lokacija skladiščenja: Oberlauch

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10520, RABLJEN YANMAR GOSENIČNI DUMPER Z NOVIMI GUMENIMI GOSENICAMI MODEL: C30R Bwjdjyiabvspfx Afnoi SER. ŠT.: 10520

Stanje: rabljeno, prevoženi kilometri: 15.634 km, moč: 229 kW (311,35 KM), vrsta prenosa: mehanski, vrsta goriva: dizel, barva: rumena, skupna masa: 23.200 kg, lastna masa: 23.200 kg, največja dovoljena obremenitev: 15.000 kg, konfiguracija osi: 4x4, število sedežev: 1, prva registracija: 03/2016, zavore: zaviranje z motorjem, Leto izdelave: 2016, obratovalne ure: 15.634 h, voznikova kabina: dnevna kabina, Oprema: dodatne luči, filter saj, kabina, klimatska naprava, parkirni senzorji, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, sistem za imobilizacijo, standardna žlica, zapora diferenciala, zavorni sistem na stisnjen zrak, zaščita za glavo, * German vehicle * Wheel loader inspection as per §14 fully documented * Condition: see photos * Only 15,634 original operating hours * Operator cab with rollover protection ROPS / falling object protection FOPS * ROPS/FOPS comply with ISO 3471:2008 and ISO 3449:2005 Level II standards * Turning radius (diameter, counterweight): 6,804 mm * Tight turning radius thanks to articulated steering * Fuel tank: 302 liters * Axles: Front axle with manually actuated differential lock, rear axle with open differential * Brakes: Fully hydraulic, sealed oil-immersed disc brakes with Integral Brake System (IBS) * Powershift transmission with planetary gears (4F/4R), automatic * Detect technologies: Cat rear-view camera and rear object detection * Immobilizer * Air conditioning, heating and defroster (automatic temperature control and fan regulation) * Operator cab with pressurized ventilation and sound insulation (ROPS/FOPS) * Electrohydraulic control lever: single-axis lever for lift and tilt functions * Electrohydraulic parking brake * Ergonomic ladders and handrails for cab access * Electric warning horn * External rearview mirrors with integrated blind-spot mirrors * Multifunctional 18-cm color touchscreen display for rear-view camera image, clock, and machine parameters * Radio incl. antenna, speakers * Fabric-covered, air-suspended seat * Electrohydraulic steering joystick, speed-dependent with force feedback * Sliding windows (left and right) * Reverse warning alarm * Mudguards, steel, front with mud flaps and rear with extensions * Engine hood (plastic) with electric tilting function * Sight glasses: engine coolant, hydraulic oil, and transmission oil level indicators * Working hydraulics: variable displacement piston pump * Max. travel speed (standard machine, empty bucket, standard tires L3, rolling radius 826 mm): - Forward 1: 6.5 km/h - Forward 2: 13.0 km/h - Forward 3: 23.5 km/h - Forward 4: 39.5 km/h - Reverse 1: 7.1 km/h - Reverse 2: 14.4 km/h - Reverse 3: 25.9 km/h - Reverse 4: 39.5 km/h * Operating weight: 23,220 kg If a new TÜV certification is required, we will gladly provide you with a quotation from our partner workshops. Our offer is generally WITHOUT new TÜV certification, DGUV inspection, safety inspection (SP), or new UVV. Please find additional trucks on our website at Bwjdpfxsvzav Ns Afnji We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspecting and testing the equipment to prevent misconceptions regarding its condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly desired. All information provided without guarantee. We assume no liability for errors or inaccuracies in this offer. The buyer is obliged to personally verify the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 18 h, Powerful mini dumper in excellent condition for sale! The machine is in very well-maintained condition and is ready for immediate use. Condition: Used, very good Operating hours: 17h Year of manufacture: 2024 SCHORR Track Dumper RR500DHKAS PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled & robust track drive - Hydraulic shovel for self-loading - 500kg payload - Large, high-quality tipping skip with wide tipping angle - Foldable operator platform as standard - 6+2 gears The SCHORR Track Dumper RR500DHKAS features a hydraulic tipping mechanism and offers a payload of 500 kg with a powerful 9.2 HP single-cylinder 4-stroke petrol engine. The unique feature of the RR500DHKAS is its hydraulically operated shovel. With the so-called "self-loader," you no longer need a separate shovel. Thanks to its compact design (740mm), the mini dumper can pass through narrow pathways and doorways. The strong tracked drive allows the mini dumper to easily overcome rough terrain, inclines, and curbs. The rubber tracks ensure stability in every working environment. Raising and lowering the tipping skip/box is effortless and requires little force thanks to the hydraulic tipping mechanism, even when fully loaded. Another advantage of this motorised wheelbarrow is its extra-large hydraulic oil tank with oil filter. With a solid skip made of thick sheet metal and a straight outlet that guarantees quick and easy emptying, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on gentle inclines is also no problem. The large tipping angle ensures that even fully loaded skips are completely emptied without the need for manual intervention. TECHNICAL DATA: - Manufacturer: SCHORR - Manufacturer’s model designation: RR500 - Model: DHKAS - Payload: 500kg - Tipping mechanism: Hydraulic (stepless) - Drive: Track - Weight without/with packaging: 353 / 373kg Drive - Engine: Air-cooled single-cylinder four-stroke engine (OHV) - Starter: Recoil starter - Output: 9.2 HP - Transmission: 6 forward gears / 2 reverse gears - Speed - Forward: max. 8km/h - Reverse: max. 5km/h Bwodpjwh I Sdofx Afnji Dimensions: - Total length platform folded: 2350mm - Total length platform extended: 2550mm - Total width (incl. shovel): 740mm - Total height: 1050mm - Container dimensions (internal): 740 x 665 x 435mm - Container dimensions (external): 1060 x 710 x 520mm - Track width: 710mm - Fill volume (liquid): ~ 200L - Fill volume (piled): up to 370L (depending on load) - Track chain dimensions: 180 x 60 x 38mm - Packaging dimensions: 1890 x 870 x 1220mm Filling height: - Side: 810mm - Front: 580mm PROFESSIONAL DUMPER WITH SHOVEL The mini dumper alleviates the laborious task of moving heavy wheelbarrows by hand. The attached, hydraulically operated shovel further aids in this process. SMOOTH OPERATION & DURABLE The mini dumper features a robust 6-speed gearbox with 2 reverse speeds. Additionally, four lashing eyes are mounted on the dumper for secure transport fastening. We at SCHORR are happy to answer any remaining questions regarding our pallet trucks. You can reach our knowledgeable team by phone or email. We look forward to hearing from you and assisting with your enquiry.