Varilni stroj z elektrodami

JÄCKLE G 400 S

Stanje: zelo dobro (rabljeno), Gold-anodized plates Working dimensions 2.5×1.1 m Electric heating Fully functional, tested You can call or write to us. We speak and write German and Russian. Dedpfxju I N D Ho Ah Soki You can also send messages in English. 31.3.5

Leto izdelave: 1994, stanje: dober (rabljeno), Rivo bandsaw sharpening machine Dkodpfxopl D Hxe Ah Ssi Model GA 250

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed Dedpfx Aowka S Ijh Seki - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2024,

Leto izdelave: 2004, stanje: dober (rabljeno), številka stroja/vozila: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm Dodjf E Higspfx Ah Sjki - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left & right: 20° – 90° - Spindle speed: 4,500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per work cycle: 10 l - Pneumatic profile clamping - Table base frame - Space requirement: approx. W 1,100 x H 1,300 x D 700 mm - Weight: approx. 200 kg

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site Djdou Agh Sspfx Ah Seki

Stanje: rabljeno, ENAOSNI DROBILEC WEIMA MODEL WLK15 Dksdpfx Astqd Ndoh Sji GLAVNI MOTOR 90KW REZILA ROTORJA 50X50 (NOVA REZILA) DOLŽINA ROTORJA 1500MM PREMER ROTORJA 370MM STROJ JE 100% FUNKCIONALEN PRIPRAVLJEN ZA DELO

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Wide Belt Sander OTT ALPHA 110 - Machine in stock - After technical inspection - Very good condition - Made in Germany - Year of manufacture: 1996 - Segmented shoe – ideal solution for lacquer / veneer work TECHNICAL SPECIFICATIONS: - Working width: 1100 mm - Working height: 1–150 mm - Combi unit with membrane shoe, task-controlled - Main unit motor power: 11 kW - Belt air jet cleaning - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Unit with felt drum - Drum motor power: 0.75 kW - Drum oscillation Dkedsgi Dryepfx Ah Sji - Cleaning brush unit - Brush motor power: 0.75 kW - Feed speed steplessly adjustable - Feed speed range: 4–18 m/min - Feed motor power: 1.5 kW - Electric height adjustment - Vacuum table - Fan motor power: 3 kW - Extraction port diameters: 4 x 120 mm, 1 x 150 mm Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2,500 kg 1. The Alpha Combi unit is a sanding module with a 150 mm diameter contact roller (hardness 90 Shore) integrated with a sectional pneumatic shoe with section width 27 mm. 2. EMS 27 optical system – detects minimal surface irregularities and adjusts the pressure of individual shoe sections at specific locations on the workpiece. 3. Control of adjacent shoe sections is possible within a range of -2 to +4.

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 03890317, Machine number: 03890317 // Condition and details as per images Dkjdpfjt A A Aqex Ah Sji

Leto izdelave: 1995, stanje: dober (rabljeno), The bender is capable of bending aluminium and plastic. Dedpjrif U Ejfx Ah Sjki Total length: approx. 11,500 mm Depth: 1,600 mm.