Podajalnik palic

IRCO RBK 10016

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Na voljo so dva večja avtomatska podajalnika palic s cevnim zalogovnikom in en manjši. 1) Kurt Breuning (IRCO) Profimat 65.8R/270.8, letnik: 2008, vodilni kanali: 8, maks. premer materiala: 65 mm, maks. dolžina palice: 3200 mm. 2) Kurt Breuning (IRCO) Profimat 65.8R/270.8, letnik: 2008, vodilni kanali: 8, maks. premer materiala: 65 mm, maks. dolžina palice: 3200 mm. 3) Kurt Breuning (IRCO) ILS RBK 10016, letnik: 2005, maks. premer materiala: 100 mm, maks. dolžina palice: 1600 mm, nastavitev višine: ca. 250 mm. Dimenzije stroja X/Y/Z: ca. 2350 mm/1000 mm, teža: ca. 500 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Možna je posamezna prodaja. Bdjdpfx Aoxv A Hpegtob

Stanje: zelo dobro (rabljeno), Sunnen GH210 Horizontalni honalni stroj Leto izdelave: 2010 Maksimalni hod: 8000 mm Hitrost vretena: 0 - 300 rpm Maksimalna moč vretena: 40 KM (29,83 kW) Maksimalna moč pomika: 18 KM (13,42 kW) Razpon hitrosti pomika: 0 – 100 ft/min (0 – 30,5 m/min) Notranji premer (I.D.): 2 – 24 palcev (50,8 – 609,6 mm) Zunanji premer (O.D.): 26 palcev standard (660,4 mm) Največja teža obdelovanca: 8000 kg Približna teža stroja: 12.066 kg Napajanje: 400 VAC 50 Hz, 3-fazno (85 A) Siemens Simatic krmiljenje, Bdjdpfsw U Uh Dex Agtsb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Bodpfx Aoyyuvtjgtsdb Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 FRONT TOOL POST - Number of positions: 7 SECONDARY OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 7 kW Bdjdpfx Agexlum Tstob WEIGHT AND DIMENSIONS - Space requirement: 2200 x 1200 mm - Machine height: 1700 mm - Machine weight: 2200 kg MACHINE HOURS - Power-on hours: 34,143 h - Operation hours: 26,657 h - Spindle hours: 15,552 h EQUIPMENT - Control: Fanuc 30i-model A - HFT (High Frequency Turning) - Driven guide bushing - Part extraction - Parts conveyor belt - Parts ejector - Coolant tank - Bar magazine: FMB turbo 3-26 / 3200 A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Transporter za ostružke Visokotlačna črpalka (HP) Zbiralnik kosov Vmesnik za podajalnik palic Bdodpoyf Dtqsfx Agteb Orodja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, Used Machine – Mitutoyo Crysta Apex C7106 Here I am offering a very well-maintained 3D coordinate measuring machine (CMM) from Mitutoyo. The machine was manufactured in 2004 and was exclusively operated in a climate-controlled measuring room. This is a top-of-the-line, fully equipped machine, so you can start working with it immediately! Bjdpfx Agevpdhxetjdb We can, of course, organize transport, installation, commissioning, and calibration (factory or DAkkS certification) for you, so you do not have to worry about any of the logistics. Machine configuration can be tailored to your requirements upon request. Typically, these machines are equipped with a rotary and swivel head, including the corresponding probe and modules. A probe rack can also be offered if not already included. We can also provide a software upgrade if required. For specifications, please refer to the PDF or images. Leasing available on request. (All prices are net plus VAT.)

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS Bdjdpsxmaguefx Agtjb - Main and sub-spindle - Driven tools - C-axis

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 234 mm, pomik osi Y: 100 mm, pomik po osi Z: 625 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: Mazatrol SmoothG CNC, premer obdelovanca (maks.): 695 mm, This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control, it ensures precision and efficiency. The main spindle reaches up to 5,000 rpm, while the sub-spindle achieves 6,000 rpm. A great opportunity to acquire this Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details. Bjdpoyk Tg Rjfx Agtjdb Machine Advantages Technical Highlights 1. Capacity: - Maximum swing: 695 mm - Maximum machining diameter: 380 mm - Maximum bar capacity: 65 mm 2. Spindle: - Main spindle chuck size: 8 inches - Maximum speed of main spindle: 5,000 rpm - Sub-spindle chuck size: 6 inches - Maximum speed of sub-spindle: 6,000 rpm 3. Turret: - Number of tools: 12 - Maximum speed: 5,000 rpm 4. Axis travels: - X axis: 234 mm - Y axis: 100 mm - Z axis: 625 mm - W axis: 585 mm 5. Control system: - Mazatrol SmoothG CNC Additional Information Fully equipped version with C-axis / Y-axis / sub-spindle / long bed. Machine currently under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Bdjdpsx Hgl Hsfx Agteb Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: rabljeno, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, and others. Turning and milling tools with VDI 40 interface. Available for sale only by pallet. Pallet 5: EUR 2,730 total - 3x driven tools VDI 40: EUR 580 each - 11x tool holders VDI 40: EUR 90 each Pallet 6: EUR 2,640 total - 3x driven tools VDI 40: EUR 580 each - 10x tool holders VDI 40: EUR 90 each Pallet 7: EUR 2,640 total Bdodpfx Aevry T Nsgtsb - 3x driven tools VDI 40: EUR 580 each - 10x tool holders VDI 40: EUR 90 each Pallet 8: EUR 2,730 total - 3x driven tools VDI 40: EUR 580 each - 11x tool holders VDI 40: EUR 90 each