Notranja simulacijska škatla

IPETRONIK IPETRONIK Innenraumsimulationsbox

IPETRONIK Interior Simulation Box
Iedpfslypy Eex Ah Detn
We offer you an IPETRONIK Interior Simulation Box.
Technical data and system description:
IPETRONIK Interior Simulation Box (new and unused)
The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It features a variable interior volume from 1.8 to 4 m³. The exhaust air flow from the front evaporator or air-conditioning unit is regulated and directed into the interior space. Only rear evaporators installed in the passenger compartment are tested using the interior simulation box.
The insulated housing is mounted on an aluminum profile frame with castors. A light is installed inside the chamber. The box is protected against overheating by a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed and the system shuts down. (TRIP TEMPERATURE: 80°C)

Technical data of the insulated chamber:
Dimensions:
External: Width 1,860 mm; Depth 2,360 mm; Height 1,360 mm
Internal: Width 1,700 mm; Depth 2,200 mm; Height 1,200 mm
Insulation:
80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m²K, building material class B1 according to DIN 4102
Connection: Tongue-and-groove system with foamed-in eccentric locking hooks
Surfaces:
Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grit 320
Floor design:
2.0 mm stainless steel sheet 1.4301, SM-pattern, slip-resistant
Floor upturned 90° along the perimeter (approx. 15 mm), floor sheet flush with wall sheet
Pressure distribution plate made of laminated wood, rubber wheel load capacity of 1,500 N (contact surface > 4 cm²)
Surface load 30,000 N/m²; floor joints fully welded, welded-in stainless steel pipe as floor drain discharged downwards
Chamber door:
Flap door, single-leaf, 800 x 1200 mm clear size, DIN left, heated door frame (230V), silicone-free heating tapes, 4-sided EPDM sealing profile,
lever latch, lockable, emergency release, heated inspection window, 500 x 500 mm, triple-glazed, surface heating (230V), frame heating (230V), heating regulated externally, silicone-free edge band
Movable wall:
1,680 x 1,180 mm, 80 mm polyurethane rigid foam, both sides 0.8 mm stainless steel sheet 1.4301, ground, grit 320, with protective film, perimetrically closed with sheet metal (The rear wall can be manually adjusted steplessly to change the volume)
Recirculation system:
For temperature control, a heat exchanger (Systemair) is installed in the recirculation path for indirect temperature regulation. Air is conveyed by a radial tube fan (Cosmo). Heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature sensors and limiters (Türk and Hillinger, Johnson Controls). Cooling is provided via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electric heating capacity: 1 x 6 kW. The mixing ratio is 50% water / 50% ethylene glycol.
Power supply from station: =TME2++AS-QF21
Operating voltage: 400V
Power: 17kW
Rated current: 33A
Line protection: 35A
Control voltage: 24V DC / 24V AC / 230V AC
PLC system: S7 300
Type: IPETRONIK Interior Simulation Box
Condition: used
Scope of delivery: (see pictures)
(Specifications and details are subject to change and errors!)
For further questions, feel free to contact us by phone.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.