Traktor

International 1046

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm (8x stepless) Clamping diameter: 26 mm Feed range x-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MT5 Tailstock quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dimensions (LxWxH) approx.: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobbing cutters, with or without thread pitch). Back turning and relief grinding possible from the front, the rear, and along the machine axis. Main drive via 8-step manual gearbox. Feed gearbox designed as a 12-step manual gearbox. Swivel range of the rear slide = 360°; Swivel range of the cross slide = 360°. Chuck is a taper disk Ø 200mm with MT5. Equipment: Mandrel Ø 49.5 x 400mm ARBAH-L 3+1 measuring system FRENIC 5000G11 frequency inverter Rbedpfx Aovbhv Rsd Tet 3-jaw chuck Ø 250 mm in good condition.

Stanje: dober (rabljeno), 1 rabljeni ravnalni brusilni stroj Rjdpfxoxgbb To Ad Tobt Proizvajalec: Jung Tip: HF 50 Tehnični podatki: - Pomik Z: 400 mm - Pomik X: 500 mm - Pomik Y: 200 mm - Dolžina mize: 720 mm - Največje število vrtljajev vretena: 4000 obr/min - Širina mize: 200 mm - Najmanjše število vrtljajev vretena: 1000 obr/min - Transportne mere: 2300 mm x 1500 mm x 1700 mm (d x š x v) - Transportna teža: 2000 kg Z: Digitalni prikazovalnik Diaform naprava

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, obratovalne ure: 2.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 350523, Oprema: CE označba, Voltage: 380V Net weight: 1,400 kg Customs tariff number: 8458.1120 Dimensions (LxWxH): 180 x 128 x 172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Max turning diameter over cross slide: 115 mm Centre height over cross slide: 60 mm Turning length B32: 265 mm Centre height above floor: 1,162 mm HEADSTOCK A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC drive motor power (continuous/intermittent): 5.5 / 7.5 kW AC drive motor torque (continuous/intermittent): 42 / 58 Nm Spindle bore (without clamping key): 39 mm Max bar capacity with collet: 32 mm Max bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force at 5 bar: 1,150 daN CROSS SLIDE Rbedpfex Upugox Ad Tjt Transverse travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC drive motor torque (continuous/intermittent): 4 / 14 Nm Ball screw, dia. x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC drive motor torque (continuous/intermittent): 4 / 14 Nm Ball screw, dia. x pitch: Ø 32 x 5 mm FEED RATES Working feed, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOLING SYSTEM Standardized tool holder mounting: VDI 20 Number of tool stations (fixed / live): 8 / - Maximum tool size: 16 x 16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Quill outer diameter: 45 mm Quill travel: 70 mm Adjustable thrust force: 25–260 daN All technical details provided without obligation and subject to errors and omissions. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Headstock: Disassembled, cleaned, worn and defective parts replaced, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjustment. Newly painted. Turret: Disassembled, cleaned, worn and defective parts replaced, repainted and faces skimmed. Tailstock: Disassembled, checked, and serviced. Newly painted. Hydraulics and pneumatics: Disassembled, motor checked, hoses and worn or defective parts replaced. X-axis: Disassembled, worn parts such as O-rings, seals, wipers replaced. New ball screw and carriage. Z-axis: Disassembled, worn parts such as O-rings, seals, wipers replaced. New ball screw and carriage. Electrical cabinet: Complete inspection, several relays replaced. Paint: Colours: White RAL 9003 and Grey RAL 7011 Geometry checked to manufacturer’s protocol. Various accessories checked and cleaned. Year of manufacture: 2002

Stanje: rabljeno, Leto izdelave: 1980/90-ta Tehnični podatki: Višina konic: 185 mm Razdalja med konicama: 750 mm Premer struženja nad ležiščem: 370 mm Vrtina vretena: 36 mm Redpfeydk Hhox Ad Tsbt Širina ležišča: 250 mm Območje vrtljajev: 38 - 1600 min⁻¹ Konec zadnjega držala: MK 3 Hod pinole: 110 mm Dimenzije (ŠxGxV), cca.: 1950 x 900 x 1200 mm Teža, cca.: 800 kg Oprema: - Trivraten stružni vpenjalni tulec, znamka Röhm, ø 200 mm - Hitromenjalni nosilec z 4 nastavki - Ležiščni omejevalnik - Posoda za ostružke

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Avtomatski stružni stroj Triade TI-30 Dolžina struženja: 300 mm Rbjdpfex Uqtdsx Ad Tjt Kopirni noži po šabloni 1 profilni nož Avtomatsko podajanje materiala