PETTINI THREADMACHINE prenovljen nov

INGRAMATIC RP2

Leto izdelave: 1989, stanje: zelo dobro (rabljeno), Capacity (mm): M8x60/80 Maximum Output: 300 ppm Hsdpfeliqf Nox Ab Eefd Year: 1989

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Moving horizontal table (workpiece), stationary machining head Control system (BiesseWorks software), with separate electrical control cabinet Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry side No. 2 pneumatic workpiece clamping cylinders within the working area Hfjdpfxewb Allo Ab Ejd Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 60 (approx.) Total connected load (kW): 24 WORKING UNITS (TOP): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW)

Stanje: novo, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy Mulching Tasks! The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and on fallow land. Featuring a double belt drive, 36 tungsten carbide-tipped hammers, and hydraulic equipment, it is ideal for tractors from 110 HP upwards – reliable, powerful, and built for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Power requirement: 110 – 160 HP Own weight: approx. 1,800 kg Attachment: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pcs., tungsten carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustment) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic couplings: 2x double acting (1x for rear door, 1x for counter bar) Features: Hydraulic rear flap & counter bar Included: PTO shaft Hedpfowhyzwsx Ab Eofd Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 ----- Contact us for a tailored offer!

Stanje: rabljeno, Leto izdelave: 1977, Drilling capacity in steel (diameter): 75 mm Arm reach: 1,700 mm Workpiece height - max.: 370 - 1,700 mm Total power requirement: 12 kW Machine weight approx.: 7,000 kg Space requirements approx.: m Manufacturer: CSEPEL (Hungary) Radial drilling machine Model: RFh 75 / 2 000 Year of construction: 1977 61158 _____ Drilling capacity in steel / cast iron: 75 / 90 mm Hsdpfxet Hw Uvj Ab Eefd Tapping capacity in steel / cast iron: 60 / 70 mm Maximum arm reach approx.: 1,700 mm Maximum workpiece height: 370 to 1,700 mm Table clamping surface: 1,100 x 2,300 mm Intermediary table approx.: 600 x 1,200 x 300 mm Table height above floor approx.: 600 mm Tool holder: MT 5 21 spindle speeds: 19 – 1,900 rpm 12 feed rates: 0.047 – 2 mm/rev Quill travel: 380 mm Vertical adjustment of arm: 950 mm Cross travel of drilling carriage: 1,500 mm Spindle drive approx.: 10 kW Total drive: approx. 12 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Dimensions approx.: 3,600 x 1,400 x 3,400 mm (height) Accessories / Special equipment: • Pre-selector switch for hydraulic speed adjustment • Mechanical feed pre-selection • Drilling with or without feed, or with manual fine feed • Drill carriage manually adjustable, vertical arm adjustment via electric motor, feed length/drilling depth set via cams on quill vernier with automatic depth stop and quill return • Electro-mechanical clamping of arm and drilling head via push button • Coolant system integrated in sub-table • VOGEL central lubrication, intermediary table, etc. Condition: satisfactory to good – demonstration under power possible, stable machine with high drilling capacity Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Radial Drilling Machine CSEPEL Type RFh 75 / 1500 Machine No. 13704 Year of manufacture: 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MK 5 Rated arm reach: 1500 mm Maximum spindle reach: 1500 mm (to column) Minimum spindle reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Vertical adjustment of arm: 950 mm Table size / clamping surface: 1800 x 1100 mm Hfedpfxjlhwr Re Ab Esd Column diameter: 450 mm Quill travel: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volt, 50 Hz, 15 kW - Forward/reverse spindle rotation via hand lever switch - Hydraulic gear shifting for spindle speed and feed - Hydro-mechanical central clamping - Motorized arm height adjustment - Without coolant system - Machine lamp - Operating manual Required space: Length 2720 mm x Width 1170 mm x Maximum height 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 tons Good condition

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation Hfodpfx Asi Eg Nkeb Ejd - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps - Knurling die: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1308 kg

Leto izdelave: 2022, stanje: novo, For sale is an NS 2 conveyor belt from Mass International. The belt can be purchased either with or without a separating roller. The separating roller is available at an additional price of €332. Feed width: 600 mm Cleated belt length: 1300 mm Overall width: 405 mm Nominal width: 350 mm Hfedpfef E E Iqjx Ab Ejd Belt speed constant: 3 m/min

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 9072492, Rated power: 100 kVA Reach: 500 mm Hfodpfxjz H Dyo Ab Eed Electrode arm spacing: 330 - 500 mm Electrical connection: 400 V kW Required installation space: 700 x 1420 x 2000 mm Weight: 750 kg

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 800 mm, globina vstavljanja: 800 mm, vstavna višina: 150 mm, dolžina rezanja (maks.): 800 mm, skupna masa: 500 kg, vrsta vhodnega toka: trifazni, skupna širina: 160 mm, skupna dolžina: 200 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, La taglierina MOHR 80 è progettata per un funzionamento a turno singolo. Il taglio preciso e delicato con movimento a bilanciere viene effettuato idraulicamente. In questo modo, il tempo di permanenza della lama al punto morto inferiore può essere adattato al materiale. Il piano di lavoro ultra-liscio in acciaio inox, dotato di cuscinetti d'aria, consente una facile manipolazione del materiale. In un ampio intervallo di regolazione, la pressione di bloccaggio può essere impostata in modo continuo su ogni materiale da tagliare tramite una manopola graduata. Potenti LED illuminano e segnalano chiaramente la linea di taglio all’operatore. Hodpfxexwnxgj Ab Ejfd Il funzionamento della macchina avviene tramite un display touch-screen ergonomico da 18,5''. Sequenze di taglio ripetitive possono essere memorizzate (capacità di memoria di 1.998 programmi) e modificate in qualsiasi momento. Integrata nel workflow digitale, la macchina acquisisce direttamente i dati di taglio dalla prestampa in Compucut® come file ppf o jdf. Successivamente, Compucut® genera automaticamente il programma di taglio. Per avviare automaticamente il programma, la macchina è dotata di lettore di codici a barre; questo consente di ridurre pressoché a zero i tempi di set-up. La visualizzazione del processo mostra graficamente la movimentazione del materiale, riducendo significativamente il rischio di errori. Per ottimizzare la qualità di taglio, il tempo di pre-bloccaggio può essere impostato in base al materiale. • Lettore di codici a barre per la creazione automatica del programma di taglio e il caricamento del programma assegnato tramite Compucut® • Visualizzazione del processo per la rappresentazione grafica della gestione del materiale al fine di ridurre il rischio di errori • Struttura macchina ottimizzata per garantire stabilità, assorbimento ottimale delle forze di taglio e massima precisione • Minima manutenzione grazie all'utilizzo di materiali innovativi Caratteristiche tecniche principali: • Larghezza di taglio: 800 mm | 31,49 in • Profondità di inserimento: 800 mm | 31,49 in • Altezza massima di inserimento: 100 mm | 3,93 in • Pressione di bloccaggio minima: 180 daN | 397 lbs • Pressione di bloccaggio massima: 2.700 daN | 5.953 lbs • Velocità di avanzamento (in ritorno): fino a 130 mm/sec | 5,12 in/sec • Taglio minimo automatico senza falsa tavola: 15 mm | 0,60 in • Taglio minimo automatico con falsa tavola: 50 mm | 1,96 in • Dimensioni (L × P × H): 1.430 × 1.970 × 1.500 mm | 56,29 × 77,55 × 59,05 in

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stroj za pakiranje Hfodpfx Ajwpx Uxeb Eod