Vodoravni stroj za struženje

Index C100

Stanje: dober (rabljeno), Leto izdelave: 2007, DESCRIPTION Control system: SIEMENS Main & counter spindle Ø 42 mm Max. speed main & counter spindle: 7,000 rpm C-axis 3x turrets Tool holder VDI 25 Turret 1 Number of stations: 10 (all powered) Travel: X= 70, Y= 70, Z= 250 mm Turret 2 Cjdpfx Aeu Rc Rrsfqohf Number of stations: 10 (all powered) Travel: X= 70, Y= 70, Z= 400 mm Turret 3 Number of stations: 10 (all powered) Travel: X= 125 mm Speed driven tools: 8,000 rpm Bar feeder: INDEX MBL February 2025 New clamping cylinder with rotary union (draw tube etc.) Original Index spare parts, €10,000,-

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Heidenhain TNC 426 control system Travel paths X/Y/Z: 600/450/450 mm Cjdjwhrfzspfx Afqehf Spindle speed: 10,000 rpm Tool magazine for 30 tools, SK 40 taper

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 10 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22/29 [kW] - Spindle speed: 7,000 [rpm] - Max. bar capacity: 42 [mm] - Max. main spindle chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 16.5/19 [kW] - Spindle speed: 7,000 [rpm] - Max. bar capacity: 42 [mm] * Max. main spindle chuck diameter: 110 [mm] Cedou Uu H Rspfx Afqjhf - Minimum C-axis resolution: 0.001 [degrees] - Travel distance: 500 [mm] - Rapid traverse speed: 60,000 [mm/min] - Distance spindle/sub spindle: 515 [mm] LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X/Z: 70 / 250 [mm] - Travel range Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] RIGHT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X: 125 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X/Z: 70 / 400 [mm] - Travel range Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 68 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 5540 x 2910 [mm] - Machine weight: 5,500 [kg] MACHINE HOURS - Spindle hours: 25,000 [operating hours] EQUIPMENT - CNC control: INDEX C200-4D (based on Siemens) - 3-color status lamp - Coolant tank * with high-pressure pump: 20 [bar] * with paper filter * with rinsing gun * internal coolant supply (ICS): main and secondary - Chip conveyor: RIGHT - Spindle cooling - Parts catcher - Bar feeder: IEMCA BOSS 545 E - Driven tool holders: 6 - Static tool holders: 24

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Chodpeiva Dksfx Afqef Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Tool pre-setting device Various SK40 tool holders Heidenhain TS32 touch probe (as new)

Stanje: dober (rabljeno), Leto izdelave: 1990, CNC cylindrical grinding machine Manufacturer: TSCHUDIN Type: HTG 22 - 862, year of manufacture: 1990 Equipped with MARPOSS E14 control and E5 measurement-control system. Centre distance: 650 mm Centre height: 100 mm Grinding length: 620 mm Weight: approx. 4,500 kg Further information: See TECHNICAL DATA SHEET Cjdpfx Afeid Aphsqehf Supplied with various grinding wheels and adapters Complete machine documentation available. Machine in stock.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 15.600 h, Funkcionalnost: popolnoma funkcionalen, Spindelhastighet: 50–6000 varv/min Rörelse XA–XB: 205 mm ZA–ZB: 700 mm W: 730 mm YA–YB: 95 mm Revolvrar: 2x 16 positioner Multitasking V16 Spindelhastighet driven verktyg: 45–6000 varv/min Cedpfewfr R Eox Afqshf Motorer driven verktyg: 5,5/3,7 kW Spindelmotorer: 22/15 kW Tillverkningsår: 2010.12 Längd: 3300 mm Bredd: 2500 mm Höjd: 2500 mm Vikt: 9000 kg Robotinterface

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Control: OSP-P20L-R Swing diameter over bed: 450 mm Swing diameter over cross slide: 350 mm Swing diameter over compound slide: 300 mm Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm X-axis feed: 0.00001 - 39.37 mm/rev Chodpfx Ajvk Sqkefqef X-axis rapid traverse: 20 m/min Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tool turret: 12 stations Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar loader: BREUNING IRCO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 6.050 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 213 mm, pomik osi Y: 572 mm, Stružniški center Haas Tip: ST 25 Leto: 2017 Obratovalne ure: 6047 h Maksimalna nazivna moč, pogonski sklop: 22,4 kW, pogon na jermen Chedsrdg H Hspfx Afqef Kapaciteta palice, maks. hitrost: 76,0 mm, 3400 obr/min Gibanje osi (X, Z): 213 mm, 572 mm Transporter za ostružke Prehod vretena: 75 mm

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - 8-OSNI CNC STRUŽNICA Z REZKALNO GLAVO, SPODNJO REVOLVERSKO GLAVO IN KONTRA VRETENOM MAKS. PREMER VRTENJA: 660 mm Chodpfjw Ey R Hox Afqof MAKS. DOLŽINA STRUŽENJA: 1495 mm MAKS. PREMER STRUŽENJA: 660 mm PREMER PALICE: 65 - 65 mm VRETENO: 35-5000 vrt./min; 22 kW; 254 mm KONTRA VRETENO: 35-5000 vrt./min; 18,5 kW; 254 mm GLAVA: CAPTO C6; -30°+195°; 15-12000 vrt./min; 18,5 kW HOD OSI X: 580 mm HOD OSI X2: 150 mm HOD OSI Y: 160 mm HOD OSI Z: 1545 mm HOD OSI Z2: 1490 mm HOD OSI B: 1550 mm HITRI POMIKI X-Y-Z: 38 - 26 - 38 m/min REVOLOVERSKA GLAVA: 9 POZICIJ MAGAZIN ORODIJ: VERIŽNI TIP; 80 POZICIJ VISOKOTLAČNO HLAJENJE: 18 Bar KRMILNA ENOTA: MAZATROL MATRIX TEŽA: 11800 kg SKUPNE DIMENZIJE: 5090 x 3270 x 2830 mm OPREMA: TRANSPORTER OSTRUŽKOV; PAPIRNI FILTER; NASTAVLJALEC ORODIJ

Stanje: dober (rabljeno), Leto izdelave: 2004, Spindle clearance: 60 mm Turning length: 280 mm Control: Siemens 840 D Main spindle speed: 6,300 rpm Drive power - spindle motor: 3.3 kW Turret 1: disc turret Number of tools in turret 1: 8 Tool system: DIN 69880 / 25 mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5,500 N Rapid traverse: 24 m/min Drive power - milling spindle: 5,000 kW Turret 2: dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5,500 N Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 24 m/min Machine weight approx.: 2.5 t Required space approx.: 6.0 x 2.0 x 2.0 m The INDEX ABC machine is a compact CNC lathe designed for short turning parts from bar stock. It features a slant-bed design with two independent turrets. The upper turret is primarily intended for internal machining and cutoff-side operations, while the lower turret is used for external machining. This turret arrangement ensures collision-free operation and easy programming with high tool availability. The large working area allows for optimal chip evacuation. The machining area includes two turrets: "Turret 1" - Disc turret with 7 radially arranged toolholders Ø 25 mm DIN 69880 and one mounting point for a reinforced synchronous spindle at station 8. With an adapter, tools with 1" mountings can also be used. The turret head is prepared for the V-guide bar system. - Synchronous spindle for rear-side machining, enabling parallel simultaneous machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back boring unit. Starting from the work spindle center in a clockwise direction, 3 stationary back boring tools are arranged. These are positioned on the pitch circle of the synchronous spindle. Rear-side machining takes place simultaneously with the main spindle machining. Additionally, two more tools can be mounted and can be equipped with live tooling. Codpfxjwbvhaj Afqjhf "Turret 2" - Turret with 6 symmetric dovetail mounts, each station featuring 2 holes for cylindrical shank tools. The following tool systems can be used: - Static tools, which can be shifted in the Z direction - Driven tools with cylindrical shank Ø25 (two positions per station) - Including bar feeder LM 3200 - + various accessories (various Ø guide half-shells/toolholders) Technical Data: - Bar stock diameter: (Ø 25 / Ø 36 / Ø 52): --> round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagonal SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Max. bar length: 3,200 mm --> From Ø 25 mm bar, min. 2,500 mm --> Up to Ø 25 mm bar, min. 1,500 mm --> Bar support = ca. 300 = 6 bars Ø 52 mm Weight (bar loader) = 700 kg