ILLIG Vodoravna rezalna žaga TS 100 C

ILLIG Horizontal-Trennsäge TS 100 C

Leto izdelave: 1965, Stanje: pripravljen za uporabo (rabljen), Max. working width: 1200 mm, clear opening: 70-150 mm, table dimensions: 1700x1400 mm, working height: 850 mm, roller diameter: 250 mm, connected load: 2.2 kW, weight: 800 kg. Prsdpfjlc N Szsx Agpjd

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Prodpfx Aerigxyegpsd Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, obratovalne ure: 41.685 h, Technical data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. draw depth (negative), mm: 100 Cycles/min (min.-max.): 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Psdpfx Agjq A Um Rspsrd Discharged thermal energy: With top heating approx.: 10,260 KJ/h With top and bottom heating approx.: 17,715 KJ/h Special equipment: Hollow floor device available Control cabinet: included

Leto izdelave: 1988, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 3284, • Protective screens around the machine. (min.) Material thickness: 0.65 mm (max.) Material thickness: 2 mm Technical specifications: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth negative/positive: 6/20 mm (22 mm negative upon request) Maximum top heating: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Maximum air consumption (depending on production): 1250 l/min Maximum water throughput: 1.0 m³/h COMPACT AND ROBUST – designed for high continuous output with easy operation. Ergonomic design (e.g. removal height 1300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, allowing for maximum material utilization for both rectangular and round lids (easy heater change). PRECISION – The precise forming table guidance via guide columns with ball bushings. The safe, reliable guarantee of precision. OPTIMAL CUTTING ACCURACY AT HIGH ENDURANCE LEVELS Cam-controlled functional sequence guarantees the highest repeat accuracy. Prjdpfxjhbu E Hj Agpjd

Stanje: delavnici obnovljeno (rabljeno), Top heating with pilot burner control Individual radiators of the top heating 2 cooling fans D05 Pre-blow and demoulding automation Documentation and plans in German Max. forming area 1210 x 500 Longitudinal and cross cutting device with 6 quick-change crush knives Prjdjfua Huopfx Agpsd Euro hole punching unit (retrofit available at extra cost) Completely overhauled

Stanje: novo, Leto izdelave: 2017, obratovalne ure: 25 h, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 520 mm, širina tračne žage: 580 mm, skupna višina: 1.500 mm, skupna dolžina: 5.200 mm, skupna širina: 2.350 mm, vrsta vhodnega toka: trifazni, skupna masa: 2.500 kg, vhodna napetost: 380 V, Nova stroj. Pjdpfeunia Hex Agpord

Stanje: novo, Leto izdelave: 2023, Order comb, tine shape 15 mm Order combs, tine shape 20 mm Finger joint profile Prjdpfx Ageiacbpjped Glue application comb Adhesive application comb Glue comb Glue combs >>Delivery time: ex stock

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Pjdpjhvi E Ijfx Agpord Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Podpewf Ea Tsfx Agpord Draw depth: 700 mm If you would like further details or a quotation, please feel free to contact us.

Stanje: novo, Leto izdelave: 2024, Pad Printing Machine TIC 201 SCDEL Podjc Nf S Espfx Agpjrd 1-Color Pad Printing Machine, floor-standing model, electro-pneumatic control, closed ink system with transversal movement, ink cup diameter 90 mm, cliché size (WxD): 583 x 100 mm, spindle-adjustable X-Y table in height, pad contact pressure 168 kg at 6 bar. Robust cast aluminum housing, electro-pneumatic control, user-friendly display with modern microprocessor control, optional signal outputs for connection to peripheral devices. Floor-standing models with sturdy, torsion-resistant base frame made of sheet steel and an extended downward adjustment range for the table to position taller workpieces. European/Japanese pneumatic components, quiet operation due to pneumatic muffler, pad pressure adjustable via the display, closed ink system with cliché mounting by clamping or optionally with locating pins for magnetic fixation, ink cups with ceramic doctor ring, contact pressure adjustable by magnetic setting. All machines equipped with lateral safety screens, emergency stop button, and foot switch. Required on-site connections: compressed air 6 bar, 230V, 50 Hz. Delivery time 2-3 weeks.