Odvod varilnega dima

ILKA APPARATEBAU SCHKEUDITZ nicht bekannt / unknown

Leto izdelave: 2026, stanje: novo, TNDG ročni pozicioner z ročnim kolesom in pnevmatsko zaponko. Merilni prikaz prek linearnega dajalnika in digitalnega prikaza. Na voljo v dolžinah 3, 4, 6 in 8 metrov Delovna višina: 800-1050 mm Dovoljena obremenitev: 70 kg/m Mere valjev: 40x300 mm EMBALAŽA IN MERE: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) Pedpfx Ajpa Nzysfajgn TNDG-6: 6500 x 670 x 430 mm (130 kg) Veselimo se vašega sporočila! Plantec Maschinen GmbH

Leto izdelave: 2006, stanje: dober (rabljeno), Gluing Machine FIN SC2R/1300 with 2 rollers Model: SC2R-1300 Year of manufacture: 2006 Manufacturer: FIN s.r.l., Italy Main technical specifications: - Working width: 1300 mm - Maximum clearance between rollers: 120 mm - Roller diameter: 185 mm - Feed speed: 19 m/min Pedpfxjfgunte Afaogn - Net weight: 390 kg - Overall dimensions: 64 x 210 x 136 cm - Overall dimensions with casing: 73 x 200 x 153 cm - 400 V, 50 Hz, 0.37 kW Ensures precise and uniform application with any type of adhesive and outstanding technical characteristics. Its high practical utility, functionality, and operator safety place it among the top two-roller gluing machines. The application roller is coated with acid-resistant rubber, ground and grooved, designed for heavy-duty use. Featuring a rationally constructed rubber layer, it allows for 6-7 regrindings. The rollers are easy and fast to disassemble. Distribution is accurate and uniform on one or both sides of the panels. Special shock absorbers on the roller supports enable automatic roller opening, allowing the processing of panels with different thicknesses within a 5 mm range. They also compensate for any panel parallelism deviations. Even adhesive dosing is ensured by a rectified distribution tank made of sheet metal, allowing for very quick removal for cleaning. The drip tray for glue and wash water is made of galvanized sheet steel and can be pulled out for easy cleaning. Protective covers made of sheet metal are installed on the rollers and adhesive distribution tank. The protective cover prevents any object thicker than 5 mm over the preset clearance from being inserted between the rollers, ensuring maximum operator safety. The electrical installation is housed in a waterproof enclosure, equipped with fuses and thermal protection for the motor and transformer. Control panel with start button, stop button, and warning light (24 V). Roller rotation chain with a self-adjusting tensioning sprocket. Roller washing system with a perforated wash tube for water supply during cleaning operations.

Stanje: dober (rabljeno), Leto izdelave: 2010, Weinig Conturex C126 CNC Fensterfertigungsanlage Beschreibung: Baujahr: 2010 Arbeitsbreite: 40–260 mm Arbeitshöhe: 25–150 mm PowerGrip-Spannsystem Tischbeladelänge Einzeltisch: 4 x 2280 mm Werkstücklänge Einzeltisch-Betrieb: 220–2700 mm Tischbeladelänge Doppeltisch (kombiniert): 2 x 4630 mm Werkstücklänge Doppeltisch-Betrieb ohne Folge: 220–5000 mm Werkstücklänge Doppeltisch-Betrieb mit Folge: 5000–6000 mm Komplett neuer PC & Software 2025 Vollständige Beschreibung auf Anfrage Verfügbar ca. Sommer 2026 (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer bei technischen Daten, Preisen und weiteren Angaben vorbehalten. Keine Gewähr für Druckfehler! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Psdpfx Aox Tq I Ejfaogn Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: novo, Leto izdelave: 2026, Main features, functions, and advantages of the welding positioner: Functions: 1. Rotation direction switch-off: Allows control of the turntable’s rotation direction. 2. Rotation direction change switch: Enables changing the direction of the turntable rotation. 3. Stepless rotation speed adjustment: This function allows you to set the turntable's rotation speed to suit a specific task. 4. Robust, compact design: Durable construction ensures longevity and reliability of the unit. 5. Foot pedal control: Facilitates convenient operation of the positioner. 6. Thermal fuse: Provides additional safety during equipment operation. 7. Brushed motor: The brushed DC motor is suitable for a range of applications. 8. Turntable tilt range 0 - 90°: The ability to tilt the turntable from 0 to 90 degrees is useful for welding in various positions. 9. Option to install a centering chuck: Allows for additional alignment of workpieces. Advantages: 1. Increased work efficiency: The positioner helps enhance productivity in assembly and welding processes. 2. Reduced production costs: Automation or the facilitation of rotating components can contribute to lower production costs. Psdpfxerigmgj Afaegn 3. Consistency of welds: The device helps maintain uniformity and quality of welded joints. 4. Flexibility of use: The ability to adjust speed and rotation direction makes the unit adaptable to different tasks. 5. Improved working conditions for the welder: Provides the welder with a more ergonomic and comfortable working position during welding. Set includes: 1. PS-500 positioner unit 2. Foot pedal control 3. Power cable 4. Operating manual 5. Boom with welding torch holder The PS-500 positioner by CORMAK is a valuable tool for industries requiring rotation and alignment of workpieces, especially during welding processes. It helps increase productivity, reduce costs, and improve quality. Technical specifications: Maximum load: 300 kg Table diameter: φ500 mm Tilt angle: 0° ~ +90° Rotation speed: 0.2 ~ 2.5 rpm Rotation power: 200 W Tilting: manual Voltage: 220V, single phase, 50Hz Torch support: yes Dimensions: 700 x 650 x 710 mm Weight: 97 kg *Three-jaw chuck is not included in the set.

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Pgodpfx Afscr T N Djajn Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Leto izdelave: 2005, stanje: dober (rabljeno), I am selling a double mitre saw OMGA TRF 527, year of manufacture 2005. Cutting length: 390 - 2800 mm Maximum cutting width: 170 mm Maximum cutting height: 90 mm Swivel heads: 0° / ±45° 2 horizontal and 2 vertical pneumatic material clamps Pjdpeg Tumcofx Afaogn 2 motors x 1.62 kW (2.2 HP) Good condition. Available immediately.

Leto izdelave: 2026, stanje: novo, MD 50 m – Manual Length Stop for Precise Positioning The MD 50 m offers you a cost-effective and easy-to-use length stop that increases the productivity and quality of your production processes. The carriage can be quickly positioned and securely clamped with a hand lever. Length measurement is taken via an easy-to-read tape measure with mm graduation and vernier scale. Existing machines and roller conveyors can be easily retrofitted. Product details: ✔ Suitable for steel profiles, aluminum, plastic, and wood ✔ Manual length positioning for versatile applications ✔ 8-fold ball-bearing carriage for precise movement ✔ Secure stop clamping via hand lever ✔ Manual lifting and lowering of the arm ✔ Measuring rail with tape measure and vernier scale (resolution 0.10 mm) ✔ Standard measuring lengths from 1 m to 6 m (optionally up to 20 m) ✔ Total system length = measuring length + 0.3 m Podpfxjidln Es Afaogn ✔ Available in left- or right-hand versions ✔ Including mounting screws Optional accessories: 🔹 Stop arm with spring damping 🔹 Arm retraction with pneumatic cylinder and impact damping 🔹 Material roller conveyors in various designs We look forward to your inquiry! Plantec Maschinen GmbH

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 164883, OFFER 17015 Technical specifications: - BIA-certified welding fume extraction unit - Pivoting extraction arm: 3000 mm - Air flow rate: approx. 1000 m³/h - Max. static pressure: 2700 Pa Pjdpfehw Ev Sex Afaogn - Filter surface area: approx. [value missing] m² - Filter control indicator for filter replacement - Separation efficiency: 99.9% - Compressed air connection: 6 bar - Drive – Fan motor: 400 V / 1.5 kW - Space requirement: approx. W 700 x H min. 1800 x D 950 mm - Weight: approx. 250 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 0001, Offer 24587 Technical specifications: - Electrostatic filter with indicator light - Extracted and purified air is returned to the workspace - Wall-mounted version with two articulated extraction arms - Articulated extraction arm length approx. 9000 mm - Air flow rate approx. 4700 m³/h - Active filter surface area 9.2 m² - Drive - Fan 400 V / 0.75 kW Pgedpfx Afswn Egrjasn - Required space approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Stanje: novo, Leto izdelave: 2025, Designed for professional structuring and sanding tasks Motor-driven height adjustment of the working units with digital display Units can be operated individually Highly durable rubberized conveyor belt Infinitely variable feed speed Constant infeed height Models STR L with infinitely variable, inverter-controlled brush speed: this allows precise adjustment of the speed to the material, making it particularly suitable for delicate materials. Unit for saw-cut finish optionally available Dimensions and Weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust Extraction Connection Extraction port diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Rotation: 1500 rpm Pjdpfx Aeff Hdisfajgn Electrical Data Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Total connected load: 6.25 kW Supply voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Noise Emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding Unit Max. sanding width: 300 mm Feed Unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Max. weight: 100 kg