Centralno mazanje

ilc PRA

Leto izdelave: 2026, stanje: novo, Mobile cleaning centrifuge including buffer tank for wastewater, agitator, and double diaphragm compressed air pump. - New machine - Numerous other versions and special designs available on request. Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Dodpfx Aaef Sqfqe Hoki Model: ZS21-M EUR Application: vibratory finishing, general solid-liquid separation, coolant processing, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces in the system of over 1800 times gravity - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on expensive additives for the vibratory finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process fluids up to 70°C (optional cooling available) - Frequency-controlled motor drive for gentle acceleration and braking of the rotor Looking for innovative solutions for surface finishing and process water treatment? We offer a wide range of systems in the fields of vibratory finishing, drying, and process water technology tailored exactly to your requirements. From development to production: we supply all our products from a single source and everything is "Made in Germany." ----- Please do not hesitate to contact us, we are happy to assist you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place electronically (email, fax, phone, messaging portal), where we first provide you with a non-binding quotation, and at the same time inform you about our general terms and conditions, right of withdrawal, and legal notice before any purchase/contract is concluded.

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Djdpfx Aaohigmbo Heki Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod Dkedpfx Ajgpxc Ssa Hei - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Dkjdpfecxxx Rex Aa Hoi Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Stanje: rabljeno, Leto izdelave: 1996, Maximum punching force: 55 t Notching: 10 mm Hole diameter and thickness: 40 x 10 mm Flat steel: 300 x 15 mm or 200 x 20 mm Dedpfx Aajwgkq Ts Hoki Angle steel 90°: 120 x 120 x 10 mm Angle steel 45°: 70 x 70 x 7 mm Round bar: 40 mm Square bar: 40 mm Strokes per minute at 20 mm stroke: 37 /min Throat depth: 250 mm Machine weight approx.: 1,800 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Tlačna sila: 300 ton Dimenzije mize: 1.200 x 850 mm Prostornina: 400 mm Širina bata: 1.100 mm Odprtina v mizi: 400 x 250 mm Vgradna višina: 500 mm Število hodov: 32 1/min Hod: 30 - 140 mm Nastavitev bata: 105 mm Teža: pribl. 19.500 kg Ostalo - Dovoljeno za ročno polaganje delov - Opremljeno z varnostnim ventilom Herion Xsz 20 - Motorizirano centralno mazanje z mastjo - Pnevmatski batni cilindri za kompenzacijo teže - Motorizirano nastavljanje bata - T-utorji v batu - Samostoječa upravljalna konzola - Ležaji ojnic obnovljeni Zaščitni pokrovi za predkolo so seveda vključeni – glejte drugo fotografijo. Djdped A Hbcjfx Aa Hjki

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 9072492, Rated power: 100 kVA Djdpfxez H Dyo Aa Heki Reach: 500 mm Electrode arm spacing: 330 - 500 mm Electrical connection: 400 V kW Required installation space: 700 x 1420 x 2000 mm Weight: 750 kg

Stanje: rabljeno, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range in mm Total power requirement: 1 + 4 kW Djdpfx Aofn Aqmea Hjki Machine weight: approx. 1.8 t Space requirement: approx. [missing data] Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with hold-down roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, tested, and newly painted.

Stanje: rabljeno, Leto izdelave: 1983, Technical Specifications: Press force: 160 t Throat depth: 360 mm Ram stroke (max.): 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4 x Ø 62 mm Ram speed forward: 200 mm/s Ram speed return: 125 mm/s Ram surface: 450 x 850 mm Borehole in ram: Ø 49 mm Dkodpfxsu Nfvue Aa Hoi Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m Manual counter i.O.

Leto izdelave: 2009, stanje: rabljeno, Material width 320 mm Material thickness 8 mm Dsdpfx Aop U Uwiea Hjki Number of straightening rollers 9 Material cross-section 2000 mm² Machine weight approx. 4.2 t Space requirement approx. 2000x2000x2400 mm