Podajalnik palic IEMCA BOSS 332-E

IEMCA BOSS 332-E

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Ročno čiščenje poteka s posebnimi rokavicami v sprednjem delu naprave. Učinkovitost čiščenja zagotavljata visokotlačna črpalka in posebna pršilna šoba. Pri teh napravah je mogoče za čistilno tekočino nastaviti temperaturo do 60 °C. Tlak je nastavljiv od 1 do 80 barov. Tehnični podatki: Delovna površina: 950 x 700 mm Notranja višina: 450 mm Nosilnost: 70 kg, opcijsko do 150 kg Tlak pršenja: nastavljiv 1–100 bar Volumen rezervoarja: 75 litrov / grelna moč 2 kW Osnovna izvedba: • Okvir, noge, pokrov in ohišje iz nerjavnega jekla Bedpfx Aiof A Nq Ajqsdh • Odstranljive plošče iz nerjavnega jekla nad rezervoarjem • Pokrov, ki se odpira navzgor, z dvema ročnima odprtinama in rokavicama • Kaljeno steklo • Sistem odpiranja/zapiranja vrat s pomočjo plinskih vzmeti • Nadzor odpiranja vrat prek varnostnega končnega stikala • Filter na sesalni strani črpalke (500 mikronov) • Nožno stikalo za upravljanje čistilne črpalke • Notranja osvetlitev • Neoprenske rokavice L 600 mm (odporne na kemikalije) • Nastavljive noge +/- 50 mm Opcijsko: • Kartušni filter iz nerjavnega jekla s črpalko (10/25/50 mikronov) • Zunanji mini pnevmatski separato olja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, TECHNICAL DATA Bdodpfx Aiswv Hnmoqeh Linear Axes (Slides X, Y, Z) Travel distances: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3,700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – B Axis Angular travel: -15° to +100° Angular travel (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Continuous power (100% ED): 10 kW Power at 25% ED: 15 kW Rated torque (100%): 8 Nm Rated torque (25%): 12 Nm Speed range: 50 – 30,000 rpm A Axis (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. spindle speed: 35 rpm Drive torque: Nominal: 112 Nm Maximum: 238 Nm Resolution: 0.0001° Axis clamping (A axis) pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Disc rotation speed: 60 rpm Max. tool diameter (adjacent positions filled): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Pick-off Slide Travel: 80 mm Feed force: 1,700 N Tilting torque: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting: 100 bar Workpiece Manipulator Pneumatic vertical sliding shutter: Ø: 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1,120 mm (2×560 mm) Max. vertical stroke: 150 mm Part pick-up Ø / length: Ø 32 mm / 100 mm Part ejection Ø / length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic equipment Operating pressure: 6 bar Hydraulic system Operating pressure: 95 – 105 bar Coolant system Coolant tank volume: 80 litres Chip tray volume: 30 litres Operating kinematic viscosity: 10 – 15 cSt SCOPE OF DELIVERY Including (not an exhaustive list): Willemin Macodel W 408 B machining centre Extraction/filtration unit Fire extinguishing system Probe Coolant system Oil chiller Data backup Complete operation documentation Exact scope of delivery as per photo series No guarantee is given for the correctness, completeness, or currency of the information provided.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, trajanje garancije: 12 meseci, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 200 mm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Completely overhauled multisensor measuring device Mahr MS 222 (optical measuring instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or via shipping company, worldwide delivery possible! Online or on-site demonstrations with customer parts as well as application-specific consulting provided by accredited Profitech inspection laboratories during project planning. Complete service available upon request: – Delivery, installation, commissioning, norm-compliant accuracy verification, certification, and comprehensive acceptance documentation. Customized training programs also available as online courses. Rental, hire-purchase, or financing available directly via Profitech, with no bank required. Measuring device can be configured individually to customer needs. Measuring range: 200 x 200 x 200 mm Load capacity (glass plate): 10kg Scale resolution: 0.1μm Max. traverse speed: 150mm/s Dimensions: 900 x 750 x 950mm Bjdpfsglp Nqex Aiqsdh Machine weight: 170kg Control cabinet weight: 90kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) available on request Retrofit 2025 Including PC and software Maximum traverse speed: 150mm/s Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Sample image by manufacturer *Commissioning, on-site calibration, and training are not included

Stanje: rabljeno, Leto izdelave: 2003, Wire EDM Machines / EDM Travel X: 350 mm Travel Y: 250 mm Travel Z: 256 mm Bjdpfx Aew Ekr Ijiqodh Max. workpiece size X: 750 mm Max. workpiece size Y: 550 mm Max. workpiece size Z: 250 mm Max. workpiece weight: 450 kg with automatic wire threading

Stanje: novo, Leto izdelave: 2023, Extraction capacity at nozzle* (filter unit): 2600 m³/h (free blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Bdjdeh Rdxnepfx Aiqsh Noise level*: 65 dB(A) Dimensions (L/W/H in mm): L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Field of application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC (digital filter control) optional - Electronically controlled EC fan as standard - Adjustable speed and air flow - Available as simplex (single-stage) or duplex (two-stage) - Wide range of air flow capacities available - Adaptable to pollutant load and required air flow - Extensive range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes involving pure oil and for separating oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitalised and can, for example, be controlled via laptop. The ELBARON® range comprises 18 device variants and can be perfectly tailored in size and capacity to your specific application. ELBARON® units impress with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to ensure, from an economic perspective, optimum filtration efficiencies, long service lives, and trouble-free operation.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, Poliranje: R 220 euro R 220 EC R 420 EC R 620 R 360 So DL R185 EC-KF Rcc4 Komplet Peskanje: RSKI 1000 RSKI700-3d-atex RT 250 euro AM: C1 M1 Bdodpfewfdbcex Aiqeh M1 Basic S1 Poleg navedenih in prikazanih strojev imamo na zalogi še številne druge stroje in dodatno opremo (sisteme za peskanje, transportne trakove in manjše stroje). Stroje je mogoče kupiti ali najeti. Za (brezplačno) svetovanje na področju poliranja, tehnike peskanja in obdelave s peskom nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 4.450 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 240 mm, pomik po osi Z: 360 mm, hitrost pomika os X: 60 m/min, hitrost podajanja osi Y: 60 m/min, hitrost podajanja os Z: 60 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530i, obremenitev mize: 25 kg, vrtljajska hitrost (min.): 250 obr/min, največja hitrost vretena: 42.000 obr/min, delovne ure vretena: 4.400 h, dovod hladilne tekočine: 4 letvica, število vreten: 1, število mest v zalogovniku orodij: 66, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Rezkalni stroj HSC HSM 400 U LP Rezkalna vretena Steptec 42.000 vrt/min, stara 2 leti Termično uravnavanje osi ITC & ITCX, 5 osi Krmilnik Heidenhain TNC530i Bedpfx Aijzzknxsqsdh Orodjarna 66X HSK40E Okrogla vrtljiva miza ITS 148 Sistem za minimalno mazanje Sesalnik za oljne pare Spiralni transporter za odvoz ostankov podjetja Phoenix Metall Izmenjevalnik toplote voda/voda Merilna sonda, infrardeča, podjetje M&H 40.01 TX/RX Orodjarna za palete, 20 x ITS 148 Možnost priključitve hladilne vode in zraka od zunaj

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 2.800 mm, skupna dolžina: 3.000 mm, skupna širina: 2.500 mm, skupna masa: 8.300 kg, Mikron HSM 800 – Obdelovalni center za obdelavo z visoko hitrostjo Letnik 2007 | Heidenhain iTNC 530 | 24.000 vrt/min | Trojni menjalnik palet Visoko natančen CNC-obdelovalni center proizvajalca Mikron / GF AgieCharmilles, zasnovan za zahtevno HSC-obdelavo pri izdelavi orodij, obdelavi grafita in elektrod ter za fleksibilno serijsko proizvodnjo. Hodi po osi X 800 mm / Y 600 mm / Z 500 mm pri velikosti palete 800 x 600 mm. Opremljen s trojnim menjalnikom palet za učinkovite proizvodne procese. Stroj ima vreteno z visoko hitrostjo, ki doseže do 24.000 vrt/min, vpenjalno glavo HSK-A63 in 50-mestni menjalnik orodij. Obsežna oprema vključuje IKZ-sistem za visok tlak (18–70 bar) z tračnim filtrom, odvajalnikom žagovine, sistemom za minimalno mazanje, sesalnikom oljnih hlapov, vrtljivim okencem za vizualni nadzor in merilno tehniko (M&H). Dodatno opremljen s sistemom APS (Napredni procesni sistem) in ITC (Pametno termično krmiljenje) za največjo varnost procesa in termično stabilnost. Krmilnik: Heidenhain iTNC 530 Hitrost vretena: 24.000 - vrt/min Hod osi Y: 600 - mm Dimenzije pritrdilne površine: 900 x 600 mm Hod osi Z: 500 - mm Hod osi X: 800 - mm Dimenzije (D x Š x V) približno: 3000 x 2500 x 2800 mm Teža približno: 8.300 kg Letnik: 2007 Stanje: delujoče Način plačila: 100 % predplačilo pred prevzemom Bdjdpfx Asy Tkc Asiqoh Način dostave: od temelja Napajalni priključek: Da

Stanje: rabljeno, Leto izdelave: 2014, Proizvajalec Citizen Machinery Miyano Co., Ltd., Japonska Model BNA 42DHY2 Leto izdelave November 2014 Serijska številka DK4Y1085 Nadzor Fanuc Series 0i TD CNC Vrsta stroja CNC obdelovalni center z dvema vretom in osjo Y Država izdelave Bdodpfxezmh R Uo Aiqjh Filipini Kapaciteta Maksimalna kapaciteta obdelovanca: 42 mm Maksimalni premer obdelave: Približno 42 mm Maksimalna dolžina obdelave: Približno 100 mm, odvisno od nastavitev za pritrditev obdelovanca Glavno vreteno: Vgrajeno vreteno Pomožno vreteno: Da Os Y: Da Os C: Glavno in pomožno vreteno Revolver: 12-postajni revolver z orodjem Orodje: Da Hodi Os X: Približno 135 mm Os Z: Približno 320 mm Os Y: Približno ±40 mm Vreteno Hitrost glavnega vretena: Do približno 6.000 vrt/min Hitrost pomožnega vretena: Do približno 6.000 vrt/min Nos vretena: Kapaciteta za 42 mm obdelovance Hitri pomik Os X: Približno 24 m/min Os Z: Približno 30 m/min Os Y: Približno 12 m/min Električni podatki Napajalna napetost: AC 200 V Faza: 3-fazna Frekvenca: 50 / 60 Hz Nazivna moč: 30 kVA Tok pri polni obremenitvi: 87 A Ocenjena prekinitev toka pri kratkem stiku: 2,5 kA Teža stroja Teža: 3.100 kg Oprema, ki je vidna na stroju Fanuc Series 0i TD CNC nadzor Dvojno vreteno Os Y Os C Orodje Hidravlični primež Sistem za hlajenje Popolnoma zaprt zaščitni pokrov Zasilna zaustavitev Elektronsko ročno koleso

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20250108, skupna višina: 2.200 mm, skupna masa: 700 kg, skupna dolžina: 1.700 mm, skupna širina: 1.300 mm, vrsta vhodnega toka: trifazni, teža obdelovanca (maks.): 75 kg, kapaciteta rezervoarja: 120 l, uporabna prostornina rezervoarja: 60 l, vhodna napetost: 400 V, vrtljajska hitrost (min.): 50 obr/min, največja hitrost vrtenja: 180 obr/min, moč: 4 kW (5,44 KM), vhodni tok: 16 A, trajanje garancije: 12 meseci, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The Turbo-Line 120 “S” model features a stainless steel discharge chute that is mounted directly on the deburring machine. When the bowl lowers, the abrasive media passes through a grid, while the parts to be deburred remain on top. This Turbo-Line machine includes a 120-liter drum with vertical, straight sides and a separate base that rotates at an adjustable speed—normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. Bdodpfx Aijvvu Sneqeh During operation, the abrasive media inside the bowl creates a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120-liter process container can handle up to 50–60 liters of product per batch, depending on the shape and size of the parts. Deburring parameters such as time and speed are individually controlled via a manual touchscreen. Water and compound are added through a manually adjustable ball valve, which is included in the scope of delivery. Finished products are discharged by tilting the bowl, a process controlled via the touchscreen. The discharge speed can also be adjusted via the frequency inverter on the touchscreen.