Stroj za pranje delov, sistem za čiščenje

IBS Teilereiniger Typ MAXI 78

Stanje: zelo dobro (rabljeno), Storti RM 500 Edger - Made in Italy - Year of manufacture: 1993 - Electrically adjustable sawblade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum width of workpiece: 600 mm - Minimum workpiece length: 800 mm - Maximum blade diameter: 600 mm - Arbor diameter: 40 mm - Two upper feed rollers - One upper pressure roller Lhodpjk Talpjfx Al Njf - Roller drive motor power: 2 x 1.1 kW - Rollers with automatic pressure engagement - Seven lower toothed feed rollers - Electric adjustment of sawblades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers diameter: 100 mm - Feed roller motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3,500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 27.608 h, proizvajalec krmilnikov: SIEMENS, Ta 5-osni DMG MORI CTX beta 800 TC je bila izdelana leta 2014. Opremljena je z glavno vreteno s 5.000 obr/min in protivreteno s 6.000 obr/min ter z 30-pozicijskim magazinom za orodja. To stružno-rezkalno središče DMG MORI CTX beta 800 TC je idealno za zahtevnejše stružno-rezkalne postopke. Za več informacij o stroju nas kontaktirajte. • Orodja: 30 kosov • Vključena orodja, prikazana na fotografijah Lhodpfx Aox U D Hqjl Nof • Brez podajalca palic

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Lhodopgmufspfx Al Nof Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 100 h, Specializirani smo za obnovo puhal, kompresorjev in vakuumskih črpalk. Servisiramo opremo proizvajalcev kot so: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Nudimo tudi najem puhal in kompresorjev. Delujemo po vsej Evropi in zunaj nje. Lhsdpon Tntqsfx Al Nof

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Height of the horizontal section: 200 mm (top edge) PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Belt width: 500 mm 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Endless welded with stepped finger joint 40 mm wave edge, high-frequency welded on both sides Ljdpfx Aljh Eld Ej Nehf * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Lsdpoxnlgcefx Al Nohf Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, premer diska: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Lapping plate diameter 525 mm Maximum lapping ring width 175 mm Maximum workpiece size 170 mm Lsdpsh Invrjfx Al Nshf Lapping plate speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operator panel Full-featured lapping machine, conventional control

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, Oprema: Na voljo je tipska ploščica, Mitutoyo coordinate measuring machine model Crysta Apex C7106 Temperature compensation on all axes Active vibration isolation system by BILZ Measuring range X-axis = 700 mm Measuring range Y-axis = 1000 mm Measuring range Z-axis = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw probe head PH10MQ Renishaw change rack SCR200 Renishaw sensor TP200 Renishaw TP200 modules = 6 units Measuring software: MCosmos PC system WIN10, 27" monitor Reference sphere / calibration sphere Software upgrade optional Ljdpfx Aewhb A Nel Nohf Hardware upgrade optional Full service available on request

Stanje: novo, Leto izdelave: 2025, MAMMUT SYSTEM: High-speed log profiling line (up to 600 mm diameter), designed for the production of squared timber, beams ("uso fiume", "uso trieste"), general sawn boards, and pallet blanks. FULLY HYDRAULIC MACHINE Minimum log diameter: 120 mm Lhjdpfohpbthjx Al Nof Maximum log diameter: 600 mm Minimum working length: 1800 mm Maximum working length: "Infinite" (∞) Spindle diameter: 60-80 mm Cutter diameter: 300 mm Feed speed: 5 - 70 m/min

Stanje: novo, Swing diameter: 400 mm Turning length: 1,000 mm Speed range: 70 – 2,000 rpm Weight approx.: 500 kg Description: - Lead- and feed-screw lathe features a robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing achieved through heavily ribbed GG cast iron - Hardened and ground face spindle ensures high accuracy and durability - High material removal rates during rough machining enable production of fine surfaces and tight tolerances - Wide range of threads and feeds without requiring a gear change in the change gear compartment - Bed guideways hardened and precision-ground - Perfectly running main spindle mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic brake for the main spindle - All controls (electrical) are centrally accessible - 4-position longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA 21 - User-friendly membrane keypad, splash-proof, sealed, and anti-glare - Increased working accuracy - Reduced error rate - X, Y, Z0, and Z-axes each with 8-digit display - Glass scales Equipment details: Feed gearbox – All gears made of steel, hardened and ground - Shafts run on needle bearings - All components lubricated in an oil bath Apron – Housing fully sealed - Safety feature to prevent simultaneous operation of threading and feed mechanism Tailstock – Hardened and ground quill, generously dimensioned, quill with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Full illumination of the work area Main spindle – Perfectly concentric running, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Operator panel – User-friendly membrane keypad - Machine lamp - Coolant pump - Direct drive - Two-speed motor control - Emergency stop button Coolant tank – Removable, level indicator, easy and complete draining/cleaning Control cabinet – Clearly arranged, 24V DC power supply, all contactors and relays from Schneider or Siemens Chip tray – Hinged, easy chip cleaning Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6 to MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Lsdpfx Ajd Eaukel Njhf Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phase(s): 3-phase Current type: AC Network frequency: 50 Hz Spindle mounting: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation: Centre height: 200 mm Distance between centres: 1,000 mm Swing over bed: 400 mm