Vertikalni obdelovalni center

IBARMIA ZV 40 L 2200

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 600 mm, širina mize: 650 mm, dolžina mize: 2.600 mm, obremenitev mize: 2.300 kg, skupna masa: 12.000 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 28.000 W, teža orodja: 10.000 g, število osi: 3, This 3-axis IBARMIA ZV 40 L2200 vertical machining centre was manufactured in 2000. It features an X-axis travel of 2200 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 600 mm. The machine provides a maximum table load capacity of 2300 kg and rapid traverse speeds of 30 m/min. If you are looking for high-quality machining capabilities, consider the IBARMIA ZV 40 L2200 machine we are offering for sale. Contact us for further details. - X-axis travel during 2-station machining (pendulum operation): 720 mm - Z-axis travel (vertical): 600 mm (optionally 800 mm) - Number of T-slots: 5 - Size of T-slots: 18 mm - Distance between T-slots: 125 mm Tjdey Umlpjpfx Aqtob - Min./max. distance spindle nose to table: 200 / 800 mm (optionally 1000 mm) - Tool holder: SK40 - DIN 69871 (options: HSK A-63 DIN 69893 or HSK A-80 DIN 69893) - Pull stud for SK toolholders: DIN 69672 - Clamping force tool holder (SK): 12,000 N (options: HSK A-63: 18,000 N / HSK A-80: 28,000 N) - Internal bearing diameter: 80 mm - Max. standard spindle speed: 6000 rpm (options: 4000 / 8000 / 10000 rpm) - Main spindle motor power at 100%: 28 kW (intermittent: 38.5 kW) - Constant power in standard configuration from: 1500 rpm - Max. torque at 100%: 178 Nm (intermittent: 245 Nm) - Feed force in X, Y, Z at 100%: 13,000 N (intermittent: 15,600 N) - Rapid traverse in X, Y, Z: 30 m/min - Max. working feed in X, Y, Z: 10 m/min - Position tolerance Tp X(1000 mm)-Y-Z: 0.015 mm - Max. positioning scatter Ps: 0.010 mm - Measuring system in X-Y-Z: linear glass scales - Milling capacity in steel (St 60): 650 cm³/min - Drilling capacity in steel (St 60): Ø 60 mm - Thread cutting capacity in steel (St 60): M-36 - Number of tool stations: 24 (options: 40 - 52) - Max. tool length: 300 mm - Max. tool weight: 10 kg - Max. tool diameter (full magazine): 85 mm - Max. tool diameter (adjacent stations empty): 125 mm - Tool management: random - Tool change time: 3.5 s - Chip-to-chip tool change time: 7 s - Floor space required: approx. 17 m² - Coolant tank capacity: 370 litres - Machine length (dimension A): 4200 mm - Structural paint (2 colours): RAL grey 7037 / blue 5012 - Electrical connection: 55 kW - Operating voltage: 400 V / 50 Hz - Compressed air connection: 6 bar - Coolant pump output: 0.75 kW - Standard equipment: CE machine guarding, chip conveyor, coolant tank, linear glass scales in the X/Y/Z axes, vertical internal cover along the X-axis, work area lighting, automatic central lubrication, hydraulic counterweight for the spindle head, automatic pneumatic spindle cleaning, mobile control panel, rigid tapping (tapping without compensating chuck). - Factory-available options: internal coolant supply (ICS), full machine enclosure, partition for pendulum operation, dividing heads/rotary tables for 1 or 2 additional machine axes, tool measuring probe, digitisation systems, tool monitoring systems, portable electronic handwheel—depending on requirements, some parts in the Y-axis may need to be replaced or repaired.

Stanje: dober (rabljeno), potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 800 mm, obremenitev mize: 12.000 kg, skupna višina: 3.900 mm, skupna dolžina: 7.200 mm, skupna širina: 5.200 mm, dolžina mize: 1.800 mm, širina mize: 1.600 mm, hitrost pomika os X: 8.000 m/min, hitrost podajanja osi Y: 8.000 m/min, hitrost podajanja os Z: 8.000 m/min, največja hitrost vrtenja: 2.000 obr/min, Namizna vrtalno-rezkalna naprava TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Proizvajalec: TOS VARNSDORF Tip: WHN 13 CNC Krmiljenje: Heidenhain TNC415 X-os: 3500 mm Y-os: 2000 mm Z-os: 800 mm W-os: 1000 mm Dolžina mize: 1800 mm Širina mize: 1600 mm Obremenitev mize: 12 t Tsdpfsy H Dahjx Aqtjb Hitrost vrtenja: 2000 obr./min Moč: 37 kW Vpenjanje orodja: ISO50 ISO/Bt/Mk Pomik X-os: 8000 mm/min Pomik Y-os: 8000 mm/min Pomik Z-os: 8000 mm/min Pomik W-os: 8000 mm/min Dolžina: 7200 mm Širina: 5200 mm Višina: 3900 mm Teža: 34.500 kg Prosimo, upoštevajte: Podatki na tej strani so bili po naših najboljših močeh pridobljeni od nas in kjer je mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar za točnost ne moremo jamčiti. Zato ne predstavljajo nobenih zagotovil ali pogodbenih pogojev. Priporočamo, da pred nakupom preverite vse pomembne podrobnosti.

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm z-axis travel: 630 mm C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Tedpfeytcf Ujx Aqtjb Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. *

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Table clamping surface: 765 x 400 mm Travel paths x/y/z: 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8,000 rpm Number of tool stations: 20 units Feed rate: approx. 30 m/min Rapid traverse: approx. 30 m/min Electrical connection: 380 V, approx. 15 kVA Tsdjtwy Dispfx Aqtjb Required space: 2,300 x 2,100 x 2,650 mm Weight: 4,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with a speed of up to 4000 rpm and can accommodate a maximum workpiece size of 2540 mm x 5540 mm. On its large 2500 × 6300 mm table, the machine supports an impressive 30,000 kg. Ideal for heavy-duty milling operations with rapid traverse speeds of up to 20,000 mm/min. Contact us for further information about this machine. Machine Advantages Technical Machine Advantages • Machine dimensions (L×W×H): 2500 mm x 6600 mm x 6350 mm // Weight: 59,000 kg • Maximum workpiece width: 2540 mm // Maximum workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm // Max. table load: 30,000 kg // Table height from floor: 850 mm // Effective width between columns: 3050 mm // T-slot (width × number): 24H7 × 13 • Cutting feed rate: 1 to 10,000 mm/min // Rapid traverse: 20,000 mm/min // Table movement X-axis: 6500 mm // X-axis travel: 6500 mm // Y-axis travel: 3500 mm // Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS // Tool magazine capacity: 50 tools // Max. tool length: 300 mm Tjdpox D S Eksfx Aqtsb • Power supply: 400V, 3-phase, 50Hz // Rated power: 513 kVA // Full load current: 741 A // Peak current: 117/138 A // Short circuit current: 18 kA • Spindle diameter: 100 mm // Spindle speed: 30 to 4000 rpm • Large table, suitable for heavy loads / Large tool magazine capacity / High rapid traverse for efficient operations.

Stanje: dober (rabljeno), Leto izdelave: 2019, Hodi X Y Z 762 x 508 x 520 mm, Os A 30/110 stopinj, Os C 360 stopinj, Velikost mize 250 mm premera, Nosilnost mize 200 kg, Hitrost vretena 12.000 min⁻¹, Konus vretena DIN 40, Menjalec orodij s 40 postajami (ATC), Krmiljenje WinMax 5, Todpfx Aqjzh I Agotsb Hlajenje skozi vreteno, transporter odrezkov.

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Todpfewpku Dsx Aqtsb Dimensions (approximate) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 3.220 mm, pomik osi Y: 800 mm, pomik po osi Z: 600 mm, število mest v zalogovniku orodij: 55, skupna višina: 3.600 mm, skupna dolžina: 7.500 mm, skupna širina: 4.200 mm, skupna masa: 15.500 kg, dolžina mize: 3.900 mm, širina mize: 750 mm, model krmilnika: Heidenhain, razdalja od središča mize do nosu vretena: 720 mm, moč vretenovega motorja: 35 W, hitri pomik na osi Z: 40 m/min, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, največja hitrost vretena: 18.000 obr/min, hitrost vretena (min.): 30 obr/min, obremenitev mize: 3.500 kg, premer orodja: 80 mm, dolžina orodja: 330 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Mobile column vertical machining center "HEDELIUS model CB80 MAGNUM" with Heidenhain TNC-530 Tjdpfx Aov Sdc Ueqtsb

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 175849, potovalna razdalja osi X: 1.740 mm, pomik osi Y: 760 mm, pomik po osi Z: 840 mm, model krmilnika: PC Fusion 640 M, skupna višina: 4.450 mm, skupna dolžina: 3.300 mm, skupna širina: 2.900 mm, skupna masa: 11.500 kg, največja hitrost vretena: 12.000 obr/min, 3-osni obdelovalni center MAZAK - VTC 300C-II Proizvajalec: MAZAK Tip: VTC 300C-II Krmiljenje: PC Fusion 640M Leto izdelave: 2005 Hladilno sredstvo skozi vreteno (IKZ): 15 bar Dolžina mize: 2000 mm Širina mize: 760 mm Pomik X-os: 36.000 mm/min Pomik Y-os: 36.000 mm/min Pomik Z-os: 36.000 mm/min Todpsyanuhjfx Aqtjb Vpenjalo orodja: SK 40 Moč vretena: 15 kW Število obratov: 12.000 vrt/min Menjalnik orodij: 30 Hladilno sredstvo skozi vreteno: Da Število krmiljenih osi: 3 Transporter za ostružke: Da Hlajenje: Da Dolžina: 4450 mm Širina: 3300 mm Višina: 2900 mm Možen ogled pod napetostjo.

Stanje: rabljeno, Leto izdelave: 2012, x-hod 2100 mm y-hod 1020 mm z-hod 762 mm Krmilnik Fanuc MXP-200FP Hitrost vretena 6000 min⁻¹ Moč vretena cca 22 kW Navor na vretenu cca 550 Nm Vpenjalo orodja SK 50 Vpenjalna površina mize 2300 x 1020 mm Največja obremenitev mize 3000 kg T-utori 6 x 22 mm Razmak T-utorov 150 mm 3-osni CNC-obdelovalni center Tsdpfxox Sr A Us Aqtob Oprema/Dodatki: - Menjalec orodij z verižnim magazinom, 40 postaj - max. Ø orodja: 120/240 mm - max. dolžina orodja: 350 mm - Naprava za hlajenje s centralno črpalko in filtrom - Odsesavanje emulzijske megle - Elektronski ročni kolesni upravljalnik - 2 kosa magnetnih vpenjalnih plošč 800 x 400 mm - različni držaji SK50 - Transporter za odrezke