Vlečni traktor

Hyster LO 7.0T

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Technical description with the following main data: Load capacity: 1000 kg static distributed load Ndedpfsgqu A Tex Al Dsb Usable lift: 810 mm Collapsed height: 200 mm Overall height: 1010 mm Platform length: 1300 mm Platform width: 800 mm Material: smooth sheet steel Lifting time approx.: 16 sec. for full lift Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + protective earthing, with 16 A CEE plug and 4 m cable Motor: 0.75 kW Paint finish: blue-grey RAL 7031 Power unit location: integrated in the lift table Control box: dead man’s control incl. 2 m cable Total weight: approx. 160 kg Standard version: The lift tables comply with EN 1570 E and are CE-marked. Steel parts are cleaned, primed with rust-inhibiting paint, and finished with two-component polyurethane lacquer. The lift tables come standard with all-round aluminium safety trip bars and maintenance props for repair and servicing. Our lift tables are designed for approx. 5 cycles/hour at full load for 8 hours/day. For more intensive operation, we offer special lift tables. Warranty: 1 year on parts under normal single-shift operation, excluding labour costs.

Stanje: rabljeno, Leto izdelave: 1988, Tehnični podatki: Dolžina plošče: 4000 mm Širina plošče: 2000 mm Višina plošče: 460 mm Teža stroja cca: 6000 kg 2 jeklene litine plošči na voljo za prodajo. (Cena na kos!) T-utori po DIN 650 a=40; h=56; b=74; c=28 mm; Razmak med T-utori = 250 mm Plošči sta opremljeni za stransko pritrditev. Nsdpfxeu N Drus Al Djdb

Stanje: rabljeno, 4 adjustable clamping jaws INGERSOLL for faceplate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No.: 39.02.10000 / 501.397 Jaw width: 70 mm Jaw length: 180 mm Ndsdpfx Asu Axzkjl Djb Jaw carrier height: 150 mm Base plate: 325 x 265 mm - Reversible step jaws for turning and drilling operations - Jaw adjustment via trapezoidal thread spindle - Jaw carriers with 6 slots 40 x 30 mm for fastening - Slot spacing: 280 x 133 and 220 x 90 mm (center-to-center) Dimensions (L x W x H): 325 x 265 x 215 mm Weight per jaw: 36.5 kg Total weight (all 4 jaws): 146 kg Good condition

Stanje: novo, Leto izdelave: 2025, nosilnost: 500 kg, 3-axis turning and tilting positioners with load capacities of 500, 1000, 2000, and 3000 kg, clamping plate diameters of 0.5, 0.65, 0.8, and 1.0 meters HDL 500: Minimum height: 1000 mm Maximum height: 1500 mm Clamping plate diameter: 500 mm Arm radius: 800 mm (boom) Rotation speed: 0.1 – 1 rpm These units have proven themselves in the construction and agricultural machinery sectors, commercial vehicles, material handling equipment, as well as in the aerospace and energy industries. Ideal for welding, assembly, machining, etc. With their stable and robust construction, flexible three-axis positioning (including overhead positions), and user-friendly operation, they make welding, assembling, and handling large workpieces much easier. - Faster production, increased productivity - Optimum workpiece positioning improves weld quality and enables higher deposition rates - Enhanced safety – hazardous crane handling is greatly reduced - Positioning across up to three axes simultaneously, without time-consuming re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility enabled by modular adaptability and customised special designs Basic principle: Nedpfjulaxbox Al Dodb By positioning the rotating arm axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines offer significantly higher performance compared to turn-tilt tables or rotary-tilting positioners. This principle allows handling of the specified loads in any required position. With infinite rotation of both rotary axes and additional vertical adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm; for models with 2,000 kg and above, 0.05 to 0.6 rpm With wireless remote control Continuous 360° rotation Continuous 360° tilt Lift: 1000 – 1500 mm; from 2 t load capacity: 1250 – 2000 mm Arm outreach up to 1 meter for loads up to 1,000 kg; from 2,000 kg: 1.5 meters

Stanje: novo, Širina plošče 2000 mm Globina plošče 4000 mm Višina plošče 300 mm Teža 5195 kg Vpenjalne plošče - T-utorne plošče - Polje plošč 4000 x 2000 x 300 mm Če niste našli želene dimenzije, nam lahko pošljete e-pošto z izpolnjenim PDF-obrazcem. Na podlagi tega vam lahko izdelamo individualno prilagojeno ploščo. Število utorov: Razdalja do roba: Razdalja med utori: Velikost utora: Kakovost litega železa HT250 Nodpfx Ajyq S Exel Djdb Ravnost manj kot 0,12 mm Površina obdelana po DIN 876/III Naslovna slika je zgolj informativna in ne predstavlja merilo ali realne podobe plošče.

Stanje: zelo dobro (rabljeno), round clamping plate clamping disc diameter 1380 mm Nsdpfx Alofggc Ts Dsdb height 75 mm weight 900 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.000 kg, skupna višina: 290 mm, skupna dolžina: 4.000 mm, skupna širina: 2.000 mm, višina plošče: 290 mm, širina plošče: 2.000 mm, delovna višina: 290 mm, višina mize: 290 mm, širina mize: 2.000 mm, transportna širina: 2.000 mm, transportna višina: 290 mm, transportna dolžina: 4.000 mm, potrebna širina: 2.000 mm, zahteva za prostor dolžina: 4.000 mm, potrebna višina: 290 mm, Clamping surface: 2,000 x 4,000 mm Nedpfx Aswzchmjl Djdb Plate height: 290 mm Weight: 5 tons

Leto izdelave: 1983, stanje: rabljeno, Conveyor belt, belt conveyor, transport belt, belt band conveyor - Manufacturer: Stork-Packo, high-load capacity conveyor belt - Model: SAL-HE 10 - Metal belts: Belt width 2 x 150 mm - Conveyor length: approx. 2200 mm - Drive: without drive motor - Overall dimensions: 2350/460/H210 mm - Weight: 127 kg Ndedjgwhvpopfx Al Dsb

Stanje: rabljeno, na voljo so tudi drugi, ESD mize in pomožne mize ter naprave, kot so osciloskopi, ločilni transformatorji ipd. Ndsdpfxoy I Uw Tj Al Dob Cena za eno laboratorijsko mizo z nadgradnjo in en premični predalnik

Stanje: zelo dobro (rabljeno), Clamping plate Ndsdpfx Aljfm Tq To Deb with T-slots diameter 485 mm bolt circle diameter 118 mm hole spacing 170 mm