Stopniščni most

Hymer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Private sale: Hymermobil with numerous extras. Equipped with 2 air conditioning units, 2 auxiliary heaters (diesel, gas, and electric), ceramic toilet with 2 cassettes, and a garage. First registration: 24.08.2009. Features include drop-down bed, leather upholstery, shower, 2000W power generator with separate built-in fuel tank—operable from inside above the oven, 4 photovoltaic panels, 1 starter battery and 3 habitation batteries (1 year old). 3,300 kg trailer load, Iveco chassis, automatic transmission, cruise control, 5,400 kg permissible total weight, 100 km/h road approval (Tempo 100), 2 heated external drawers, underfloor heating and hot water operable via gas or electricity, 2 gas bottles with automatic switch-over, twin rear wheels with only 78,000 km, external shower with hot water, Goldschmitt air suspension at the rear, single beds in rear with infill cushions for complete-width sleeping area (both short and long infills available), automatic satellite system, 2 televisions. Main inspection (TÜV) passed in May 2026 with no defects. Vehicle registered for passenger transport up to 8 seats. First registration: 24.08.09, diesel engine, 130 kW, very economical: at 100 km/h, average consumption is 12.1 l/100 km; at 80 km/h, only 10 l/100 km. Vehicle length: 8.19 meters. Additional locks on entry door, separate cab door, and both garage doors. Reversing camera with multiple viewing angles. Large air awning, kitchen cabinets, carpets, etc. for exterior use included upon request. Hjdpfx Alspl Sngoter

Leto izdelave: 2022, obratovalne ure: 400 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of Manufacture: 2022 Hodpfx Ajrt Uvzoltsr Operating Hours: approx. 400 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 spacing: 36 mm Screen deck 2 spacing: 24 mm - Pre-screen deck with long hopper and variably adjustable dosing roller - Volume measurement via loading - Preparation for air separator - Compressor - LED lighting package - Remote control for all key settings via radio - Diesel-electric drive 80 kW - Axle leveling system - Twin axle, approved for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, general waste, RDF, various recycling materials (not suitable for construction debris or excavated material) Miscellaneous: Very good used condition, fully operational

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Hjdpfxjrgzv Ns Altjr * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 195 kW (265,13 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 18.500 kg, Leto izdelave: 2023, številka stroja/vozila: SW4055CD00288, Oprema: kabina, klimatska naprava, standardna žlica, tempomat, The new SANY SW405 wheel loader takes productivity to the next level. Its powerful Deutz common rail diesel engine and robust frame design make it the ideal choice wherever power and reliability are required. Key features include high breakout forces and large tipping loads. Furthermore, with its extensive range of equipment options, this powerhouse is a versatile machine that can handle a wide variety of wheel loader applications with ease. Hedpfx Ajrblkkslter

Stanje: novo, Leto izdelave: 2024, SCHORR Ride-on Sweeper Electric Sweeping Machine Street Sweeper Floor Cleaner High-performance, low-noise sweeper for indoor and outdoor use. Equipped with an optional spray nozzle. The ride-on sweeper provides a comfortable and efficient solution for cleaning floors. The ergonomic seat and intuitive controls allow for effortless operation, even over extended periods. The powerful motor ensures thorough cleaning, even under demanding conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of comfort and efficiency makes floor cleaning a hassle-free and pleasant task. Standard LED work lights facilitate work in dimly lit areas. With an output of 1920 watts from 48V, the sweeper delivers ample power for over 4 hours of continuous operation. SCHORR Ride-on Sweeper RR80KM – Discover the Advantages: -- Fully electric ride-on sweeper with a 1,250 mm working width – ideal for large indoor and outdoor areas Hedpjuac D Uefx Altjr -- 48V/1920W performance -- 80-liter bagless rear collection container, easy to withdraw and empty -- Powerful 48V, 58Ah system -- With optional spray nozzle to reduce dust dispersion -- Extremely simple operation -- Outstanding maneuverability Technical Data Manufacturer (short name): SCHORR Manufacturer model code: RR80KM Drive: Ride-on Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tyres: PU (non-slip) Net weight: 400kg Basic Dimensions Collection container capacity: 80l Freshwater tank capacity: 10l Main brush diameter: 500mm Overall length: 1,600mm Overall height: 1,300mm Overall width: 1,250mm Sweeper width (without brushes): approx. 80cm *Further technical specifications are available upon request. The chassis is made entirely of flexible, robust plastic, minimizing potential damage to walls and similar surfaces. Other than the side brushes, nothing protrudes beyond the bodywork, allowing you to clean as close as possible to objects. The collection container is made of solid steel and can be easily removed from the rear of the machine. Sensitive components such as the front work lights are protected by a metal bumper. All in all, the machine is perfectly equipped for most applications. We usually keep all spare parts in stock and can deliver them quickly if you ever encounter a problem. Should you require technical support, we have the necessary technical expertise and can carry out repairs in our in-house workshop. Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Just contact us and we will advise you on the various options. We look forward to your inquiry! If you have any questions about our ride-on sweeper, the SCHORR team will be happy to assist you. Our knowledgeable staff is available by phone or email. We look forward to hearing from you and assisting with your inquiry.

Stanje: rabljeno, Leto izdelave: 2006, Technical details: x-axis travel: 1000 / 600 mm y-axis travel: 570 mm z-axis travel: 570 mm Control unit: Fagor 8055 MC Tool magazine with 24 stations Tool holder: SK 40 Spindle speed: 10,000 rpm Spindle taper: SK40 Infinitely variable feed rates X/Y/Z: 10 m/min Rapid traverse X/Y/Z: 24 m/min Operating hours / power-on hours: not available Table size: 1200 x 500 mm Table load capacity: 800 kg Hjdpfx Aou Idfroltor Distance spindle nose to table: min./max. 100/670 mm Interface: 232 Total power requirement: 15 kW Machine weight approx.: 5.0 t Machine dimensions (LxWxH) approx.: 3.3 x 2.3 x 2.8 m Equipment: - Cooling unit with spindle feed (no ICS) - Control panel with hand-held controller - Chip conveyor - Electrical cabinet with cooling, Rittal SK 3305500 in good condition.

Stanje: dober (rabljeno), Driven and Non-Driven Roller Conveyors SSI Schäfer • Partial accumulation roller conveyors • Various lengths available and adaptable to your individual warehouse project • Clear width: approx. 460 mm • Infeed and outfeed units available • Roller conveyor curves available Very well maintained driven and non-driven roller conveyors are available in large quantities. For further information, please refer to the attached images. The diagrams show the current configuration; of course, this can be modified as needed. We are happy to assist you with transport! Payment is accepted exclusively via: • Bank transfer • Advance payment All prices are net prices (plus VAT). Hodpfx Alegpw Rnetsr You will, of course, receive an invoice with VAT stated separately. Please also see our other listings. Didn’t find what you’re looking for? Don’t hesitate to get in touch with us.

Stanje: rabljeno, Track width: 540 mm Hedsglandepfx Altor Rollers: Conical

Stanje: zelo dobro (rabljeno), For sale: DDR motor pump. Hsdpfxsv Nrf Ej Altsr - 800 l/min - 28 HP - In very good condition.

Stanje: rabljeno, moč: 37 kW (50,31 KM), barva: rumena, Leto izdelave: 2020, Lastna teža: 3.300 kg Hodpfeyaznnjx Altsr