Hladna krožna žaga

HUVEMA HU 370 PSK

Stanje: rabljeno, Leto izdelave: 1961, Ram weight: 750 kg Ram stroke: 660 mm Blow rate: 100 /min Blow energy: 2040 kJ Distance under bolster / lower edge of ram guide: 6600 mm Reach: 750 mm Steel forging – rectangular up to 240 mm Steel forging – diameter up to 270 mm Drive power: 75.0 kW Hammer weight: 16.5 t Anvil weight: 15.5 t Total weight: 32.0 t Space requirement (W x D x H): 3.2 x 1.45 x 3.45 m Forging hammer Ijdjvuulljpfx Af Tjtb Operating principle: pneumatic Can only be offered in our warehouse without commissioning – video from the seller available before disassembly.

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Pedestal for upright installation, Iedpfx Asizwv Nef Totb Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary tilting table WPK 5000, load capacity 500 kg, 1 pre-selection start, 1 control for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary tilting table is possible.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.600 kg, skupna dolžina: 6.020 mm, Leto izdelave: 2024, gradbena višina: 530 mm, vrsta pogona: Keine, nosilnost: 18.000 kg, vlečna sila z obremenitvijo: 18.000 N, gradbena širina: 2.000 mm, Težkotovorni priklopnik Stanje: Nova naprava Tehnično stanje: Novo Sprednja pnevmatika tip: Bandaže Sprednja pnevmatika dimenzija: 425x150x305 Zadnja pnevmatika tip: Bandaže Zadnja pnevmatika dimenzija: 425x150x305 Itjdpfxsu Dz Rke Af Teb Opis: Vse-kolesno krmiljenje – volanske čepke z nastavljivo sledjo in volanskimi palicami, omejitev krmiljenja pri 45° zasuku, vlečna ojnica: 1.200 mm z varovalom proti padcu in nastavitvijo višine, ter vse-kolesno krmiljenje – volanske čepke z nastavljivo sledjo in volanskimi palicami, omejitev krmiljenja pri 45° zasuku, vlečna ojnica: 1.200 mm z varovalom proti padcu in nastavitvijo višine.

Stanje: rabljeno, 🧰 Caractéristiques du produit • Fabricant : Palflex • État : occasion • Couleur : orange • Hauteur : 400 cm • Profondeur : 110 cm • Charge par travée : 24 000 kg • Longueur des longerons : 410 cm • Charge des longerons : 3 000 kg par niveau L’offre comprend : • 11 cadres prémontés, profondeur 110 cm, hauteur 4 m • 40 longerons, longueur 4,1 m, 3 000 kg de charge/niveau Itedpfevfnqvox Af Tjb • 80 goupilles de sécurité • 44 ancrages en béton • 1 plaque de charge par ligne de rayonnage Protège-angles d’occasion disponibles immédiatement, supplément de 15 € net/pièce ! Autres accessoires disponibles dans le catalogue d’accessoires. 💰 Prix 2 080 € HT, hors TVA • Remise sur quantité : sur demande • Frais de livraison : Europe entière sur demande • Délai de livraison : disponible immédiatement • Visite et enlèvement : à tout moment sur rendez-vous Plus de 5 000 mètres linéaires de rayonnages à palettes en stock, provenant de nombreux fabricants (Changements et erreurs dans les données techniques, informations et prix ainsi que vente intermédiaire réservés ! Voir nos CGV, tous les prix s’entendent hors TVA, départ entrepôt.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.000 mm, Leto izdelave: 2026, gradbena višina: 540 mm, vrsta pogona: Keine, nosilnost: 10.000 kg, vlečna sila z obremenitvijo: 10.000 N, gradbena širina: 2.000 mm, Težko tovorna prikolica Stanje: Nov naprava Tehnično stanje: Novo Sprednje pnevmatike - tip: Bandaze Sprednje pnevmatike - velikost: 425x150 Zadnje pnevmatike - tip: Bandaze Isdeu Dz Rdjpfx Af Tjtb Zadnje pnevmatike - velikost: 425x150 Opis: Krmiljenje z vreteno osi, dvostransko delujoči podložni klini, po višini nastavljiva vlečna droga z zaščito proti izpadu Krmiljenje z vreteno osi, dvostransko delujoči podložni klini, po višini nastavljiva vlečna droga z zaščito proti izpadu

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Robot ROMAT 320, control system ROTROL II incl. connecting cable, programming handheld unit, gas nozzle sensor, spot editor, pedestal base Welding machine MC 3 353 (350 A), wire feed unit, welding torch, hose package, mechanical cleaning, pressure booster 1 manipulator QR-WP-TC 2.5 kN, rotation radius 400 mm, load capacity 150 kg, overhaul of drive motors 1 light barrier, 1 pre-selection start, 1 service door with interlock safety switch Base frame with partition walls, extraction hood Delivery time: approx. 3 months. Subject to prior sale. The system will be cleaned and serviced before delivery. Warranty: 3 months on material without services. Itsdpfx Afoizkbps Tsb Assembly and commissioning available on request.

Stanje: dober (rabljeno), Leto izdelave: 2016, Saw blade diameter: 315 mm Cutting capacity – round at 90°: 100 mm Cutting capacity – square at 90°: 90 x 90 mm Cutting capacity – rectangle at 90°: 85 x 110 mm Cutting capacity – rectangle at 45°: 85 x 85 mm Cutting capacity – round at 45°: 100 mm Cutting capacity – square at 45°: 85 x 110 mm Saw blade speeds: 25 / 50 rpm Power supply: 400 V / 50 Hz Motor power: 1 kW Machine weight: approx. 0.24 t Dimensions (L x W x H): 980 x 790 x 780 mm Unused exhibition machine, Saw supplied with base frame, 2-speed motor, Pneumatic quick-action vice, Itedpfevxlkaox Af Tob Material stop, Coolant system, Mitre cutting possible at 45° left and 45° right,

Leto izdelave: 2025, Stanje: novo, Drum-type Shot Blasting Machine; Ijdpfxjvliuce Af Tjtb Consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Sieve. Three rubber belts wound on drums rotate the barrel-shaped virtual chamber; during this process, the turbine propels steel shot onto the parts, achieving the blasting effect. The blasting cabin is manufactured from ST-37 steel plate; areas directly targeted by the turbines in the hot spot are lined with wear-resistant manganese steel, while other sections are reinforced with Hardox plate. (Full manganese steel lining is optional.) The wear-resistant plates are mounted with bolts to facilitate future replacement due to wear; they can be easily replaced by your authorized personnel. The bolted design of wear plates allows for convenient replacement by your company’s authorized staff when replacement is required due to abrasion. The dimensions of the TK-6 PREMIUM machine are as follows: Drum Diameter Ø: 1000 mm, Length between Discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 type Ø 320 mm with 7.5 kW motor. Equipped with a Rubber Belt Conveyor.

Stanje: rabljeno, Leto izdelave: 2005, Saw blade diameter: 400 mm Cutting diameter: 140 mm Cutting range at 90° (flat): 210 x 120 mm Cutting range at 90° (square): 140 mm Cutting range at 45° (flat): 145 x 120 mm Cutting range at 45° (round): 120 mm Cutting range at 45° (square): 120 mm Speed: 1 - 98 rpm Total power requirement: 2.8 kW Weight: 0.75 kg Itedpfx Aovlaikof Tsb Dimensions (L x W x H): 0.9 x 1.0 x 2.0 mm Cold circular saw including: - Mitre cuts up to 60° - Micro-spraying device - Coolant system