Rabljeni stroj za brizganje plastike

Husky HyCAP4 300-RS50/50

Leto izdelave: 1994, Stanje: dober (rabljeno), Ziersch & Baltrusch Surface Grinding Machine Lsdpek Ixl Aefx Ah Ajak - Equipped with Formmaster 6 / 30 - Equipped with belt filter system - Equipped with coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Machine is in good condition and fully operational; it can be inspected and tested under power on site. Shipping also possible abroad. Inspection: Please note that, to avoid any misunderstandings, the item can and should be inspected and tested under power prior to purchase. Please ask any questions before purchase to avoid uncertainties. For general enquiries or to arrange an inspection appointment, I am available anytime via the phone number listed below or above. Subject to prior sale and errors in description. VAT will be itemized separately on my invoices. Shipping via freight forwarder.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stock No. 2587k 1 used pelletizing line, function-tested, Ljdpfetvfhcsx Ah Aeak Throughput up to approx. 600 kg/h depending on material, consisting of: - 1 volumetric dosing unit - Extruder Plastmachines type PME 100 Single screw Ø 100 mm – 35 L/D ratio Drive 134 kW – DC motor - 1x degassing zone - Melt filter BKG type K-SWE 121 RS – back flushable incl. Hydraulics 3 kW - Strand die head with 20 holes x Ø 3.5 mm - Strand cooling trough 400 x 4000 mm with strand guide rollers - Strand suction unit - Strand pelletizer SG 3000 - ResoTec control / switch cabinet Inspection by appointment – short notice possible Further pelletizing lines / extruders available & ready for demonstration at our Wuppertal facility

Stanje: novo, Leto izdelave: 2022, Shelf Press OMC 3000×1300 105T Oil-Heated Working area: 3000x1300 mm Opening width: 400 mm 6 cylinders with 85 mm diameter Total pressing force: 105T Maximum heating temperature: 85°C Logic control system Machine operation via touchscreen panel Laodsimwp Sspfx Ah Ask Readouts: temperature, pressing force, shelf opening time, loading area calculator, gluing process programming Power: 21 kW CE certificate Year of manufacture: 2022 Machine available on order Brand new machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, 8x Caviete Kanisterverschluss Laedpfx Aoh Rwlqeh Ask Baujahr ca. 2003

Leto izdelave: 2020, Stanje: novo, DESCRIPTION The so-called half water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operated in the sodium cycle, Ledpofz Nakefx Ah Aoak - Strongly basic anion exchanger operated in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Pipes The columns are made of AISI316L stainless steel.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Lasdpfx Asuxfucjh Aek Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Lajdpfotunccsx Ah Ask Machine weight approx.: 32 t From series production

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A defective ABA CNC precision surface and profile grinding machine is available. Grinding length: 2500 mm, grinding width: 1020 mm, cross traverse: 920 mm, intermittent cross feed: 750 mm/stroke, continuous cross feed: 5000 mm/min, table-to-spindle center distance: 1100 mm, magnetic table dimensions X/Y: 2500 mm/1000 mm, max. table load: 5000 kg, table speed: 60 m/min, spindle power: 26 kW, grinding wheel dimensions X/Y/Z: 500 mm/100 mm/203 mm, grinding wheel speed: 35 m/s. Machine dimensions X/Y/Z: approx. 8000 mm/4000 mm/3150 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1,000 h, cycle hours: approx. 400 h. Includes Hyfra sigma 13-S cooling unit, year of manufacture: 2014. The linear drive of the X-axis is defective and has been removed. Documentation available. An on-site inspection is possible. Lajdswi Tpkopfx Ah Ajk

Leto izdelave: 2006, obratovalne ure: 15.000 h, Stanje: dober (rabljeno), For sale is an Erema 1007T Year of manufacture: 2006 Ljdpfx Aeumubyeh Ajak Operating hours: 15,420 Throughput: 250–350 kg/h The plant is currently processing HDPE, but it is also suitable for other plastics such as LDPE... The machine can be inspected during operation. A new extruder screw was installed in February.

Leto izdelave: 2004, Stanje: delavnici obnovljeno (rabljeno), No. 2054 Lsdpfjiyx Uzox Ah Asak 1 used, partially overhauled and function-tested Alphatec Extruder, type AE-S 75.28 Screw diameter: 75 mm, 28 L/D Drive: 75 kW AC Screw speed up to 80 rpm, adjustable 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our plant in Wuppertal. Further extruders available.