Univerzalni rezkalni stroj

HURON NU4

Stanje: dober (rabljeno), Vizualizacija 3 osi na 5 µm, montaža s pokrovom. Delovna površina: 1435 x 460 mm. Hodi: 1100 x 700 x 500 mm (DxŠxV). Število utorov: 5. Vreteno SA40 od 30 do 2066 vrt/min. Vreteno z zavoro za varnost. 2 varnostna izklopna gumba. Zaprto ohišje vretena. Samodejno mazanje. 3 avtomatski in 3 hitri premiki. Hitrost hitrega pomika 2800 mm/min. Moč 10 KM, 380 V. Osvetlitev, hlajenje z ločenim usedalnim rezervoarjem. Upravljanje na sprednji plošči z izklopnim gumbom za silo. Stroj v popolnem stanju. Teža stroja: 3500 kg. Hodpjxxz Anefx Af Tsfb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 380 mm, izvrtina vretena: 72 mm, premer struženja: 600 mm, Manufacturer: Gurutzpe Model: Super M 300 Admissible dimensions: Distance between centers: 3,000 mm Swing over bed: 600 mm Swing over cross slide: 360 mm Swing in gap: 780 mm Bed width: 415 mm Spindle bore diameter: 72 mm Speeds: Hodpewtwqasfx Af Tefb 18 available speeds: from 16 to 1,000 rpm Motor: Power output: 10 HP Equipment: Fagor digital readout Quick-change tool post 4-jaw self-centering and adjustable chuck Steady rest Overall condition: Lathe in good condition

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The HURON NU-4 is equipped with various buttons, switches, and levers to control its operation. Hodjriulgspfx Af Tefb x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360° spindle taper: SK 40 spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 HP machine weight approx.: 3.1 t machine dimensions approx.: 2.36 x 1.65 x 1.45 m (W x H x D)

Stanje: rabljeno, Leto izdelave: 1967, x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm Distance spindle / table: 9–509 mm Spindle head swivel range: 360° Spindle taper: SK 40 Spindle speeds: 30 – 2066 rpm Number of speed steps: 27 Feed rate: 1.6 – 820 mm/min Number of feed steps: 27 Clamping surface: 1435 x 460 mm Hodjcxxyzepfx Af Tofb Rapid traverse X and Y axes: 2.8 m/min Rapid traverse Z axis: 1.4 m/min Total power requirement: 10 HP Machine weight approx.: 3.1 t Space requirement approx.: 2.36 x 1.65 x 1.45 m (W x H x D) Universal tool milling machine with 3-dimensional adjustable original Huron universal milling head; head adjustable for horizontal milling as well; handwheels and feeds for X, Y, and Z working range; main safety machine switch; adjustable work light; coolant system; Heidenhain digital readout.

Leto izdelave: 1985, Stanje: pripravljen za uporabo (rabljen), Table dimensions: 1435x460 mm, Number/Width/Spacing: 5/16/80 mm, Control: TNCi-120, Length: 1435 mm, Width: 2330 mm, Height: 1648 mm, Weight: 3.1 t, comes with documentation, accessories available, no known defects, on-site inspection possible. Hjdpfx Aolbmupsf Tefb

Stanje: dober (rabljeno), HURON MU4 Milling Machine Table size: 1450 x 460 mm Number of T-slots: 5 (16 mm each) Longitudinal travel: 1300 mm Cross travel: 700 mm Vertical travel: 500 mm Spindle taper: ISO 40 Spindle speeds: 27 (30 to 2,066 rpm) Rapid traverse: 2,800 mm/min Maximum load capacity: 1,500 kg Maximum clearance under head: 530 mm Spindle motor: 8.8 kW Feed motor: 3.5 HP Coolant pump motor: 1.6 HP Overall dimensions (L x W x H): 2,000 x 2,000 mm Approximate weight: 4 tons Hjdpfx Afju Hifzo Tsfb

Stanje: rabljeno, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Number of strokes 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Hfedpfxeu Uu S Tj Af Tsb Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping in table Change gears

Stanje: dober (rabljeno), Wheel diameter – max. 180 mm Wheel width 58 mm Module – max. 4 Module – min. 0.5 Strokes per minute 200 – 710 Hsdsuayw Sspfx Af Tefb Total power requirement 3 kW Machine weight approx. 3 t Good condition, change gears, etc. Year of manufacture approx. 1964

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Hfjdot Hwupepfx Af Tob Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m Hfsdpfxjtzdyzo Af Teb O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!