Vertikalni obdelovalni center

Hurco VM 10 i

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 660 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 24 m/min, proizvajalec krmilnikov: Hurco, model krmilnika: WinMax, teža obdelovanca (maks.): 681 kg, skupna višina: 2.519 mm, skupna dolžina: 1.800 mm, skupna širina: 1.671 mm, širina mize: 406 mm, dolžina mize: 762 mm, obremenitev mize: 681 kg, skupna masa: 2.818 kg, največja hitrost vretena: 10.000 obr/min, razdalja od mize do središča vretena: 101 mm, razdalja od središča mize do nosu vretena: 610 mm, moč vretenovega motorja: 11 W, nos vretena: ISO40, število vreten: 1, število mest v zalogovniku orodij: 20, dolžina orodja: 25 mm, premer orodja: 89 mm, teža orodja: 7 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Rabljeni vertikalni obdelovalni center Hurco VM10i, idealen za podjetja, ki iščejo natančnost, zanesljivost in produktivnost z nizko investicijo. Stroj je popoln za kovinskoobdelovalne delavnice, podizvajalce, proizvajalce avtomatizacijskih komponent, avtomobilsko industrijo, hidravliko in splošno mehaniko. Trdna struktura, visoka natančnost in odlične zmogljivosti za rezkanje, vrtanje in vrezovanje navojev. Stroj je v dobrem obratovalnem stanju in je pripravljen za takojšnjo vključitev v proizvodnjo. Možen ogled in preizkus pri nas. Stroj vključuje: * polžasti transporter sekancev s stranskim izhodom Gedjzcpu Iopfx Aa Ueuc * visokotlačna črpalka * digitalni priročniki * izjava o skladnosti CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, največja hitrost vretena: 10.000 obr/min, Primeži niso vključeni v obseg dobave! Gujdpoxb Dyhofx Aa Usc

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Krmiljenje MAX5 DSM (2 x 19" zaslona) Velikost mize 762 x 406 mm X-hod 660 mm Y-hod 406 mm Z-hod 508 mm Hitrost vretena 10 – 12.000 min⁻¹ Magazin orodij 20 pozicij Vpenjalo SK40 Hitri pomiki X/Y/Z 28 m/min Moč 9,4/11 kW Godpfx Aajy Du I Ro Ujuc Tloris 2000 x 1800 x 2600 mm Teža stroja 2850 kg Oprema - Opcije programske opreme: 3D, DXF, AVG (realistična grafika), žepi/otoki, funkcija rampe, sinhrono rezanje navojev, orodna in materialna baza, NCPP in ISNC (makro-ISO-kodno programiranje), Ultimotion, sinhrono rezanje navojev - Električni ročni kolešček - Sistem za hlajenje - Transportni polž za odrezke - Signalna luč - Noge za stroj

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, This 3-axis Hurco VM 10i was manufactured in 2021 and comes equipped with advanced features such as the MAX5 control unit with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for improved performance. It is fitted with a high-pressure through-spindle coolant system, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Take the opportunity to purchase this Hurco VM 10i vertical machining center. Contact us for more information about this machine. Gedpfx Aasx H A I Rj Ujuc • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics • Windows-based platform • Integrated hydraulic tool clamping system • Through-spindle coolant flood with ICS (20 bar) • High-pressure coolant flood system • Spindle cooler • Chip auger • Chip splash protection enclosure • LED machine light in the working area • Indicator lamp for machine status • Trochoid milling function for increased machining performance • Tool and workpiece measurement • Collision protection with safe zones • Synchronous tapping • ISNC extended NC mode

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, proizvajalec krmilnikov: HURCO, model krmilnika: WINMAX, skupna višina: 3.240 mm, obremenitev mize: 2.000 kg, skupna masa: 7.950 kg, največja hitrost vretena: 12.000 obr/min, teža orodja: 7.000 g, število osi: 3, This 3-axis Hurco VMX50i was manufactured in 2021. It is equipped with a robust SK40 spindle capable of speeds up to 12,000 rpm and features a large table measuring 1500 x 660 mm that can support up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverses of 32/32/24 m/min, it is ideal for dynamic machining tasks. The machine includes an automatic tool changer with 30/40 positions. Please contact us for further information on this machine. • Spindle nose to table: 101-711 mm • Table working area (W x D): 1500 x 660 mm • Table T-slots (DIN 650): 6 x 18 x 100 • Automatic Tool Changer (ATC) positions: 30/40 • Machine condition: Powered on and in operation • Total machine hours: 6700 Additional equipment • Chip conveyor • Mist separator • External coolant tank with filtration for internal tool cooling • Includes workpiece and tool probes • DWG/DXF programming extensions Gsdpfx Ajx D E Acea Usuc Dimensions Machine depth: 5059 mm

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances: X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle: Taper: SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions: Length: 1626 mm Width: 914 mm T-slot width: 16.00 mm T-slot spacing (center-to-center): 125 mm Number of T-slots (standard): 7 Max. table load (evenly distributed): 4,536 kg Integrated 4th axis (B-axis): Table: 1,626 mm x 813 mm Clamping surface diameter: 762 mm Rotation range: 360° Max. workpiece swing diameter: 1,270 mm Table load: 4,536 kg Max. rated power: 3.7 kW Continuous rotation torque: 2,712 Nm Backlash: 30 arc-sec Gujdev N Di Aopfx Aa Usc Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for cutting (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for cutting in X, Y, Z axes: 12.7 m/min Rapid traverse (X): 15.2 m/min Rapid traverse (Y): 15.2 m/min Rapid traverse (Z): 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (all positions filled): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General specifications: Coolant tank capacity: 360 L Dimensions: Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608 kg

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 6.293 h, Funkcionalnost: popolnoma funkcionalen, Naprodaj je obdelovalni center proizvajalca Deckel Maho, tip DMU 50. Naprava je v dobrem stanju in si jo je mogoče ogledati na lokaciji. Gedpeyghqvofx Aa Ujuc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Guodpfx Aaowwucuo Ujc Short bar loader Spinner Servo-Load 80-1500V2 with support stand Control: Fanuc 32iTB with color LCD screen/operator panel 1 Drive motors for X/Z axes and spindle by GE Fanuc, digital AC technology, travels: X = 200 mm, Z = 515 mm, main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6 = 40%), main spindle as integrated motor spindle with water cooling, spindle nose A6, C-axis for spindle including software option "Transmit" for face machining and "cylindrical interpolation" for cylindrical surface machining, hydraulic hollow clamping cylinder, 12-position turret for tool holders in accordance with DIN 69880/30 mm, 12 live tool stations with turret for milling and drilling operations, tailstock for TC400, Morse taper 4, Chip conveyor TC400, with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump 50 l/min, 3.3 bar Parts catcher, tool probe arm, high-pressure pump, electrostatic air cleaner

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Year of manufacture: 2004 Sauter 8-station turret VDI 20 + driven tool positions at all stations Spindle locking brake C-axis (interpolating) Reinforced coolant pump: 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color screen Work Area & Capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Center distance: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (DIN 55027) / MT 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (in two gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & Axes Rapid traverse (X/Z): 8 / 10 m/min Feed rate: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: interpolating (included as an option) Tool Turret & Tailstock Turret: 8-position disk turret (Sauter), all stations driven Speed (driven tools): max. 6,000 rpm (3.8 kW) Tool system: VDI 20 (DIN 69880) Tailstock: quill diameter 70 mm, stroke 120 mm, MT 5 Guedpfx Aaey Dckaj Uoc Dimensions & Capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10–115 mm Travelling steady rest with rollers, guide diameter 10–115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-change chuck with clamping lever, SSF 40/6 Ortlieb, collet 173 E Faceplate operation preparation, including speed monitoring with separately adjustable limit Tooling: fixed tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used for single-part production in prototype manufacturing. Low spindle run hours Available immediately.

Stanje: rabljeno, Leto izdelave: 2007, Suitable for the automatic machining of PCD-tipped cutters, shank tools, and disc-shaped tools such as saws, cutters, etc. using the wire electrical discharge machining (EDM) process. Equipment: - Full enclosure - Cooling unit for dielectric fluid - Automatic fire extinguishing system - N181 extraction unit - Measuring probe - Machine lamp - Automatic central lubrication - ISO50 workpiece holder - Measuring arbor Maximum cutter outside diameter: 250 mm Maximum cutting length: 260 mm Shank tool diameter: 10 - 250 mm Maximum outside diameter of disc-shaped tools: 250 mm Maximum tool weight: 20 kg Gujdpfxowtmg Ds Aa Usc Travel X-axis: 275 mm Travel Y-axis: 300 mm Travel W-axis: 200 mm A-axis taper: ISO 50 E-axis swivel range: 180° Machine dimensions (L x W x H): 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) Colour: grey RAL 7045/7047