Proizvodna stiskalnica

Hidralmac Viersäulenpresse

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, stiskalna sila: 400 t, HIDRALMAC Four-Column Hydraulic Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Cushion For sale is a HIDRALMAC hydraulic four-column press (deep drawing press) with a pressing force of up to 400 t. This machine is specifically designed for demanding deep drawing and forming processes. It features a powerful deep drawing cushion as well as state-of-the-art control and safety technology. Its robust construction and comprehensive equipment make it ideal for industrial series production and complex forming tasks. ===== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 400 t ==== General Data - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine designation: Deep Drawing Press - Design: Four-Column Press - Pressing force: 50–400 t (adjustable) - Machine weight: approx. 27.5 t - Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm - Main cylinders: 2 units ==== Working Area - Pass-through width: 2,500 mm - Installation height: 1,300 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Ram - Table size: 2,500 × 1,600 mm - Ram size: 3,100 × 1,600 mm - Column diameter: 220 mm - Retraction force: 40 t - T-slots: According to DIN 650-22 (custom options available) ==== Speeds - Approach speed: 200 mm/sec - Return speed: 200 mm/sec - Working speed: 5–15 mm/sec ==== Deep Drawing Unit - Drawing cushion size: 1,400 × 800 mm - Drawing cushion force: 30–60 t - Drawing cushion stroke: 250 mm - Drawing cushion speed: 5–80 mm/sec ==== Hydraulics & Power - Total power requirement: 62 kW - Oil tank: 1,500 l - Oil capacity: 1,200 l - Hydraulic components: Bosch Rexroth - Pressure build-up: up to 400 t within max. 4 seconds - Pressure control: adjustable via monitor ==== Control & Operation - Control system: Siemens - Monitor: Siemens 12" - Operating modes: manual, semi-automatic, fully automatic - Travel distance control adjustable via monitor - Remote maintenance capability - Two-hand control on mobile stand - Electrical control cabinet for wall mounting ==== Safety & Equipment - Safety PLC for hydraulic block monitoring - Light sensors at the front and rear: SICK (1,300 mm) - Side safety doors left & right (each 1,000 × 800 mm) - Interior LED lighting - Energy control system (idle power consumption reduced to approx. 2 kW) ==== Construction - Sturdy welded construction - Machine steel ASTM A36 - Induction-hardened and chrome-plated piston rods - Low maintenance and reliable - CE certificate - Documentation in German ===== Deep drawing, forming technology, series production, sheet metal forming, toolmaking Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press Rsdpfoin Et Njx Ah Ijr Are you looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our expertise is in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. We use predominantly components from leading European manufacturers for our hydraulic systems.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Siemens Sinumerik 840D control system Bar capacity: 65 mm Spindle speed: 5,000 rpm 2 x 12-station turrets with driven tools Turret 1 with Y-axis Rjdjwh U D Hepfx Ah Ier Parts catcher Band filter system Chip conveyor IRCO Profimat bar feeder

Stanje: kot nova (razstavni stroj), Leto izdelave: 2016, stiskalna sila: 160 t, HIDRALMAC Four-Column Press – 160 t – 1,200 × 800 mm – Tryout Press For sale is a hydraulic four-column press (tryout press) from HIDRALMAC with a pressing force of 160 t. This machine is ideal for tool testing, adjustment work, and small production runs. Thanks to its compact design, precise control, and robust construction, it offers a reliable solution for workshop and production environments. ===== Technical Data & Information: Hydraulic Four-Column Tryout Press – 160 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Type: Tryout Press - Design: Four-Column Press - Pressing Force: 160 t - Machine Weight: approx. 7 t - Total Power Requirement: 7.5 kW - Main Cylinder: 1 unit ==== Working Area - Installation Height: 800 mm - Stroke: 600 mm - Table Height: 850 mm - Column Gap (Lateral): 400 mm ==== Table & Load - Table Size: 1,200 × 800 mm - Maximum Table Load: 5 t - Return Force: 16 t ==== Speeds - Approach Speed: 1–9.8 mm/sec - Return Speed: 1–9.8 mm/sec ==== Hydraulics & Operation - Oil Volume: approx. 220 l (AW 46) - Robust, low-maintenance hydraulic layout ==== Construction & Features Rsdpsfxyi Iefx Ah Ier - Column Diameter: 160 mm - Compact design for flexible applications - Suitable for tool adjustment and tryout work ===== Tool calibration, tryout operations, small batch production, tool making, forming technology Hydraulic press, tryout press, four-column press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machine directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements because they comply in all points with the Brazilian NR 12 national safety guidelines, which build on these. Our core strength lies in special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly attractive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2017, številka stroja/vozila: DF0152, stiskalna sila: 80 t, HIDRALMAC Four-Column Press – 80 t – 800 × 800 mm – Deep Drawing Press with Cushion For sale is a hydraulic four-column press (deep drawing press) manufactured by HIDRALMAC, offering a press force of 80 t. This machine is designed for drawing and forming processes and features an integrated deep drawing cushion, as well as state-of-the-art control and safety technology. Thanks to its compact design and robust components, it is ideally suited for small batch production, toolmaking, and precision forming tasks. ==== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 80 t ==== General Information - Manufacturer: HIDRALMAC Rodsfxyh Hspfx Ah Ijr - Model: Four-Column Press - Machine Type: Deep Drawing Press - Design: Four-Column Press - Pressing Force: 80 t - Machine Weight: approx. 5.1 t - Total Power Requirement: 12 kW - Operation: Two-hand operation - Main Cylinder: 1 unit ==== Working Area - Working Area: 800 × 800 mm - Table Size: 800 × 800 mm - Working Height: 800 mm - Table Height: 800 mm - Stroke: 500 mm - Travel Path: 700 mm ==== Table & Ram - Ram Plate: 2,800 × 1,300 mm - Column Diameter: 75 mm ==== Speeds - Approach Speed: 9.8 mm/sec - Working Speed: 9.8 mm/min - Return Speed: 18 mm/sec ==== Deep Drawing Unit - Cushion Force: 25 t (at 280 bar) - Cushion Stroke: 200 mm - Rod Diameter: 30 mm - Cushion Speed: 80 mm/sec - Deep Drawing Cushion Motor: 10 kW ==== Hydraulics & Performance - Main Motor: WEG 15 kW - Pump: Rexroth / Parker axial piston pump - Hydraulic Block & Valves: Rexroth / Parker - Hydraulic Tank: 300 l (oil requirement approx. 250 l) - Additional Oil Tank: 150 l - Hydraulic Pressure Regulation: via PLC (from 10 t) - Air cooling with electric fan - Lubrication: manual via grease nipples or cartridges ==== Control & Operation - Control System: Siemens / Moeller - Operating Modes: automatic, semi-automatic, manual (setup mode) - Control Panel on swivel arm - Movable two-hand operation - USB interface for data transfer - Remote control (Siemens remote maintenance) - Spacer sensors for stroke length adjustment - Pressure consistency: 0–10 sec ==== Safety & Equipment - Light barriers in front and rear (Schmersal, 800 mm) - Additional diagonal guards in lower area - Hydraulic safety monitoring ===== Drawing, forming, small batch production, toolmaking, sheet metal forming Hydraulic press, deep drawing press, four-column press, forming press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which builds on the aforementioned standards. Our core strengths include custom machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: novo, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will prepare an attractive offer including installation and service. Over the past years, ISGEC has supplied to more than 26 countries, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your enquiry. Rjdpfef Rt Irox Ah Ier

Stanje: rabljeno, številka stroja/vozila: 4396, stiskalna sila: 200 t, Pressure: 200 t Frame gap: 1200x1000 mm Stroke: 600 mm Rjdofxyh Ajpfx Ah Isr Total power requirement: 32.5 kW Machine weight approx.: 20.5 t Return force: 20 t Main cylinder: 1 piece Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Axial piston pump: Rexroth/Bosch Installation height: 800 mm Working area: 1200x1000 mm Table and ram plate: 1200x1000 mm Working height: 1100 mm Forward speed: 170 mm/sec Return speed: 150 mm/sec Pressing speed: 15 mm/sec Oil capacity: 500 l Socket: 220 V Storage capacity: 200 programs Pressure setting: 20–200 t via monitor Speed adjustable in automatic and semi-automatic mode: 5–170 mm/sec Pressure holding time: 0–10 sec Setup mode speed: 2–10 mm/sec Drawing cushion: 750x950 mm Drawing cushion stroke: 300 mm Drawing cushion force: 5–50 t Drawing cushion speed: 2–80 mm/sec Drawing cushion weight: 1000 kg Scope of delivery includes: - Manuals and operating instructions for the motors, pumps, and the press itself, as well as CE declarations (all provided in duplicate, both printed and on data storage devices) - 1 set of seals and filters

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 4303, stiskalna sila: 500 t, Hidralmac Four-Column Hydraulic Press – 500 t – 2,100 × 1,500 mm – Stroke 1,000 mm For sale is a hydraulic four-column press from Hidralmac with a pressing force of 500 t. The machine is designed for demanding forming processes in industrial continuous operation and, thanks to its multi-cylinder technology, high dynamics, and comprehensive control and monitoring functions, offers a precise and powerful solution for complex applications. ===== Rsdpfsdyynvox Ah Isr Technical Data & Information: Hydraulic Four-Column Press – 500 t ==== General Information - Manufacturer: Hidralmac - Model: Four-Column Press - Type: Hydraulic Column Press - Machine designation: Forming Press - Pressing force: 500 t (max. 550 t with reserve) - Machine weight: approx. 39 t - Dimensions (L × W × H): 5,100 × 2,800 × 4,040 mm ==== Working Area - Clearance: 2,100 × 1,500 mm - Installation height: 1,500 mm - Stroke: 1,000 mm - Table height above floor: approx. 850 mm ==== Table & Ram - Table size: 2,100 × 1,500 mm (with T-slots) - Ram size: 2,100 × 1,500 mm - Total table plate size: approx. 2,750 × 1,600 mm - Total ram plate size: approx. 2,750 × 1,600 mm ==== Speeds - Approach speed: 300 mm/s - Return speed: 300 mm/s - Pressing speed: - 200 t: 28 mm/s - 300 t: 20 mm/s - 500 t: 6 mm/s ==== Hydraulics & Drive - Total power requirement: 62 kW - Return force: 40 t - Main cylinders: 2 units - Auxiliary cylinders: 2 units - Axial piston pump: Bosch Rexroth A4VSO125 (approx. 290 l/min) - Hydraulic block: Rexroth - Oil tank volume: approx. 2,000 l - Pressure control via PLC (min. 50 t) - Pressure holding time: 0–900 sec - Energy saving through automatic pump shut-off when tool is closed ==== Ejector & Auxiliary Systems - Ejector: 4 × 15 t at 250 bar - Ejector stroke: 300 mm (adjustable via PLC) - Ejector speed: - Forward: 95 mm/s - Return: 240 mm/s ==== Control & Electrical - Control: Siemens S7-300 - Monitor control with pressure and position programming - Storage capacity: up to 200 programs - Electronics: Siemens / Möller - Operator panel on swivel arm - Voltage: 400 V / 50 Hz - Control voltage: 24 V ==== Safety & Monitoring - Light curtains by SICK (1,500 mm, front) - Monitoring of hydraulics, pumps, and temperature - Synchronous monitoring of main cylinders with automatic correction - Pressure monitoring with automatic retraction or holding function (± 5%) ==== Construction & Features - Main cylinder column diameter: 360 mm - Auxiliary cylinder column diameter: 120 mm - Material: ASTM A36, manufactured according to DIN 8651 - 8 mm polycarbonate safety glazing in working area and doors - Liquid channel around table (25 mm radius) ==== Additional System - Nitrogen compression unit (up to 280 bar, connectable) ===== Forming technology, heavy forming, series production, large-part machining, industrial manufacturing Hydraulic press, hydraulic column press, four-column press, column press, forming press, industrial press, production press

Leto izdelave: 2006, stanje: generalkompletno obnovljen (rabljeno), HYDRAULISCHE PRESSE MECAMAQ PRESSKRAFT: 350 t HUB: 350 mm TISCHVERFAHRWEG LINKS-RECHTS: 600 mm TISCHVERFAHRWEG VORNE-HINTEN: 750 mm ANTRIEBSLEISTUNG: 15 kW Abmessungen: Rsdpfx Ahefmqqle Isr Höhe: 2,9 m Breite: 1,9 m Länge: 1,3 m Gewicht: 5.700 kg

Leto izdelave: 1999, stanje: rabljeno, Tractive force – max. 6.0 t Redpsd Il A Nofx Ah Ier Ram stroke – max. 1250 mm Space requirement approx. 1.20 x 1.20 x 3.25 m

Leto izdelave: 1971, stanje: dober (rabljeno), Decoiler – expanding mandrel decoiler with coil lifting table Rodpfxed Ha E So Ah Ier Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Mandrel Ø: 508 mm