SPC3000 iz druge roke

HGG Profiling Equipment B.V.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 18.000 kg, dvižna višina: 11.900 mm, vrsta goriva: električni, tip droga: teleskopski, gradbena višina: 1.990 mm, lastna masa: 21.650 kg, skupna dolžina: 5.540 mm, vrsta pogona: Elektro, gradbena širina: 2.000 mm, Pick & Carry Kran Itodpfx Afjt Dd Uwe Tob Masttyp: Teleskop Technischer Zustand: gut Vorderreifen Typ: Non Marking Hinterreifen Typ: Non Marking Fernbedienung

Stanje: pripravljen za uporabo (rabljen), 26 engines are available. Itsdoikrb Iepfx Af Tjb

Stanje: novo, Article: Welding Positioner 50 kg Type: KT-50 without chuck Max. load: 50 kg horizontal Max. load: 25 kg vertical Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilting angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Price does not include quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and shipping within Germany: approx. €80 Iodpfxobambrs Af Tetb

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), With articulated carrier DC26, power output: 108 kW, maximum travel speed: 16 km/h, tire size: 14.00 R24 A, 2 x drill booms BUT 35, Deutz BF4M 1013C diesel generator set, BMH 6414 drill carriages, maximum drill rod length: 4,321 mm, maximum drilling depth: 4,020 mm, HL 210 loading platform, CE compliant, air/water flushing, heat exchanger and Swellex high-pressure pump, supplied without drifters (drill hammers). Ijdpol Tn Epofx Af Totb

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): approx. 1.9 x 2.6 x 1.0 m Machine transport dimensions: 2.6 x 1.8 x 1.0 m Itsdpfsu Ibu Rox Af Teb Single and double bending of reinforcing steel possible. Number of bending formers: 2 pcs. Bending angles: 40°, 60°, 75° Bar diameter: angle form = Ø 12 - 50 mm, double angle = Ø 12 - 35 mm Operation via control panel with touch screen Bending plate: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Pin holes: Ø 48 mm (16 pcs.) - Center pin: Ø 50 x 94 mm Stop bars: - 2 pcs., length: 840 mm - Manual adjustment: 100 mm - 13 holes, Ø 48 mm Accessories: Bending formers: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for bending plate 8x counterholders (various forms) 1x bending tray

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t Itedpsf Sqckefx Af Tjb >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. Isdpfxefg E Hlo Af Tstb • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting Isdpfx Afed Iipmo Tetb • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Power rating: 630 kVA Primary voltage: 20 kV Secondary voltage: 400 V Frequency: 50 Hz Voltage: 400 V / Hz Itjdpfx Afsv Szwcj Teb Rated current: 18.2 / 24.2 A Weight: 2.6 t per unit Dimensions (L x W x H): 1.7 x 0.82 x 1.66 m DRY-TYPE TRANSFORMER – on U-profile base frame Two transformers available for sale. Both include an enclosure (currently disassembled, see photo). No. 1 No. 2

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2003, obratovalne ure: 24.000 h, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 4.100 mm, Kot upogiba (maks.): 183 °, radij upogibanja (maks.): 300 mm, debelina stene: 8 mm, Transfluid DB 2090 DB CNC Mandrel Biegezentrum für Rohre Exzellente, hochwertige Maschine aus deutscher Herstellung, Haupt-Hydraulikpumpen komplett generalüberholt und der Hauptbiegekopf vollständig revidiert. Es muss lediglich noch ein neuer Encoder installiert werden, dann ist die Maschine einsatzbereit. Ausstattungsmerkmale: – Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D Biegeradius – Steuerbare Dornrückholung (anticipated mandrel withdrawal) – Vollautomatische Positionierung von Spannbacken und Mitnehmer – Druckverstärkter Mitnehmer für enge Radien und Dünnwandrohrbearbeitung – Langer Maschinentisch mit 4000 mm über Dorn Itedpfx Afjtrd T Tj Tjb – Umfangreiches Werkzeugsortiment im Wert von über AU$150.000 inklusive Werkzeugliste: – 101,6 mm / 152 mm CLR – 101,6 mm / 200 mm CLR – 76,2 mm / 114 mm CLR – 76,2 mm / 200 mm CLR – 76,2 mm / 238 mm CLR – 63,5 mm / 96 mm CLR – 57,2 mm / 86 mm CLR – 50,8 mm / 76 mm CLR – 44,5 mm / 67 mm CLR – 40 x 40 mm / 120 mm CLR – 50 x 50 mm / 150 mm CLR – 60,3 mm / 150 mm CLR – 48,3 mm / 120 mm CLR