Stroj za rezkanje ročične gredi

Heller RFK 100-2-500

Stanje: rabljeno, Leto izdelave: 2017, stružna dolžina: 500 mm, moč vretenovega motorja: 30.000 W, General Year of manufacture: 2017 Control: SINUMERIK 840D sl Maximum Workpiece Dimensions Workpiece length up to mm: 500 Maximum swing diameter mm: 200 Offset above center mm: 25 Maximum clamping diameter mm: 100 Journal diameter mm: 30 – 60 Working Area Longitudinal travel Z-axis mm: 602 Longitudinal travel Z-/W-axis mm: 602 / 602 Cross travel X-axis mm: 140 Cross travel X-/U-axis mm: 140 Steady rest Z3-axis: dependent on chuck Workpiece C21-/C22-axis degrees: 360 Tool External diameter mm: 230 Tool Holder Quick-change system Tool Turret Bearing Diameter At front bearing mm: 660 * 790 Chuck Mount Cylindrical mm: 180 Chuck diameter up to mm: 260 Spindle bearing diameter at front bearing mm: 170 Guide System for Machining Units Roller linear guides, size 45 Feed Drives Cross slide WAxes, Z-axis 100% duty cycle Nm: 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm: 18 / 18 Steady rest Z3-axis 100% duty cycle Nm: 10.5 Tailstock right Z4-axis 100% duty cycle Nm: 10.5 Rotary feed workpiece C21-axis, C22-axis 100% duty cycle Nm: 18 / 18 Axis Speed Feed / Rapid traverse longitudinal W-, Z-, and Z3-axes Fjdpfx Aewgndkefleft m/min: 0 - 40 Feed / Rapid traverse cross U-axis, X-axis m/min: 0 - 20 Feed / Rapid traverse Z3-axis (steady rest) m/min: 0 - 40 Rotary feed workpiece C21-axis, C22-axis rpm: 0 – 60 Milling Drive Power per unit (nominal / max) kW: 15 / 30 Cutting speed m/min: 120 - 255 Torque at tool Nm: 1500

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Fodpfxjvgxfys Afljft Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 17.529 h, stružna dolžina: 500 mm, moč vretenovega motorja: 30.000 W, General Information Year of manufacture: 2017 Operating hours: 17,529 Control system: SINUMERIK 840D sl Maximum Workpiece Dimensions Workpiece length up to: 500 mm Maximum swing diameter: 200 mm Stroke above center: 25 mm Maximum clamping diameter: 100 mm Journal diameter: 30 – 60 mm Working Area Longitudinal travel (Z-axis): 602 mm Longitudinal travel (Z-/W-axis): 602 / 602 mm Ffjdowgnigspfx Afljt Cross travel (X-axis): 140 mm Cross travel (X-/U-axis): 140 mm Steady rest Z3-axis: dependent on chuck Workpiece (C21-/C22-axis): 360° Tooling Outer diameter: 230 mm Tool Holder Quick-change system Tool Turret Bearing Diameter In front bearing: 660 / 790 mm Chuck Mount Cylindrical: 180 mm Chuck diameter up to: 260 mm Workpiece Spindle Bearing Diameter In front bearing: 170 mm Guide System for Machining Units Roller linear guides, size 45 Feed Drives Cross slide adjustment W-axis, Z-axis 100% duty cycle: Torque: 18 / 18 Nm Tool feed U-axis, X-axis 100% duty cycle: Torque: 18 / 18 Nm Steady rest Z3-axis 100% duty cycle: 10.5 Nm Tailstock right Z4-axis 100% duty cycle: 10.5 Nm Rotary feed workpiece C21-/C22-axis 100% duty cycle: 18 / 18 Nm Axis Speeds Feed / rapid traverse speed longitudinal W-, Z-, and Z3-axes: 0 – 40 m/min Feed / rapid traverse speed transverse U-axis, X-axis: 0 – 20 m/min Feed / rapid traverse speed Z3-axis (steady rest): 0 – 40 m/min Rotary feed workpiece C21-, C22-axis: 0 – 60 rpm Milling Drive Power per unit (nominal / max.): 15 / 30 kW Cutting speed: 120 – 255 m/min Torque at tool: 1,500 Nm

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg Ffjdpfx Afjd Nb A Njljt General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: rabljeno, Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, največja hitrost vretena: 24.000 obr/min, Lot no. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year of manufacture 2008 CNC control Sinumerik 840D NC rotary table, B-axis Tool magazine for 80 tools Pallet changer device, 2 pallets 400 mm x 400 mm Through-spindle coolant supply (IKZ) Chip conveyor Coolant system Ffjdpferairwjx Aflst Technical data: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool stations in changer: 80 Machine weight approx.: 13,000 kg Technical data, accessories and machine description are non-binding.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1276, CNC vroče radialno kovanje GFM SX-13 Leto izdelave: 1974 / 2022 Nova krmilna enota PLC SIEMENS S7 Številka stroja: 1276 Število kladiv: 4 Kovalna sila posameznega kladiva: 160 ton Fsdpfeq U R T Nsx Aflsft Število udarcev kladiva na minuto: 700/min Dolžina kladiva: 240 mm Območje nastavitve premera: 80 mm Največji premer za kovanje: - Konstrukcijsko jeklo, okrogel prerez: Ø 130 mm - Kvadratni prerez: Ø 115 mm Najmanjše dimenzije za kovanje: Ø 25 mm Maks. hod manipulatorja A: 6820 mm Maks. hod manipulatorja B: 7150 mm Največja dolžina obdelovanca: 6000 mm Hitrost manipulatorja pri hitrem pomiku: 400 mm/s Skupna priključna moč: 300 kW, 380 V, 50 Hz Dimenzije stroja: Višina kovanja nad tlemi: 615 mm Skupna višina stroja nad tlemi: 1665 mm Skupna dolžina stroja: 32.670 mm Skupna dolžina temeljev: 33.400 mm Skupna širina stroja (brez pomožne opreme): cca 3885 mm Skupna širina temeljev: 16.000 mm Skupna masa stroja: 84.000 kg

Stanje: rabljeno, Impact energy: 11,000 kg/m Max. stroke: 900 mm Clear guide width: 750 mm Length of tool seat in hammer bar: 750 mm Max. number of strokes: 90 min⁻¹ Length of tool seat in die holder: 1,050 mm Ffodpfx Afsvam Ebsljt Minimum tool thickness: 350 mm Maximum upper tool weight: 1,100 kg Working height approx.: 780 mm Counterweight: 75,000 kg Machine weight approx.: 103,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: GM 3941/02, There are a total of 3 x Grob BZ500 available. (Please provide your offer price) Sales only within Europe, including Turkey. Price without packaging; Delivery condition: FCA (machine location) ===== For technical data, please refer to the handout. All warranty rights are excluded. We do not assume any liability for the correctness of the technical data and year of manufacture, for the completeness of accessories and tooling equipment, nor for compliance with all safety and environmental protection requirements listed in accident prevention regulations. Fedpfemk Utrjx Afleft No sales to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Stanje: dober (rabljeno), JBT M cvrtnik, 6 m x 600 mm. Popolnoma opremljen cvrtnik. Električno ogrevanje, teflonski dovod, sistem za odstranjevanje usedlin, upravljanje preko zaslona na dotik itd. JBT M cvrtnik je visoko zmogljiv industrijski cvrtnik, zasnovan za obsežno proizvodnjo hrane. M cvrtnik se v živilski industriji uporablja predvsem za cvrtje različnih izdelkov, kot so piščanec, ribe, prigrizki in druga pripravljena hrana. Ffodjud Ry Sepfx Aflst

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 550-235-ELD, GENERAL CHARACTERISTICS Max. rolling diameter: 41 mm Max./Min. module range: 1.5 / 0.39 Max. rolling width: 92 mm Max. stroke of the tool holder slide: 760 mm Ffodpod Nw Ttefx Afljt Max. rack length: 610 mm Max./Min. diametral pitch: 20/40-32/64 Serial Number: 550-235-ELD ELECTRICAL CHARACTERISTICS Main motor power: 15 HP