Vertikalni obdelovalni center

HELLER FT 8000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna širina: 5.800 mm, skupna višina: 4.500 mm, skupna dolžina: 13.500 mm, dolžina mize: 10.000 mm, širina mize: 1.250 mm, Travelling column – high performance, precision, and metal removal capacity Linear RAM guide combined with HDS hydrostatic guidance ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with high-pressure coolant (IKZ) 15 bar Chip conveyor BLUM 3D touch probe Wide bed, linear guided in X-axis, traverse path W = 930 mm Rotary table drive prepared in control cabinet X-axis: 8,000 mm Y-axis: 1,300 mm Z-axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: 40 ISO/Bt/Mk X-axis feed: 35,000 mm/min Y-axis feed: 40,000 mm/min Z-axis feed: 40,000 mm/min Milling head auto-index: 0.001 x 0.001 degrees Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Rcjdpfx Ansyr Dmdspoh Weight: 45,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual conditions are implied. We recommend verifying all critical details.

Stanje: kot nova (razstavni stroj), Leto izdelave: 1988, številka stroja/vozila: 1116/87, MANUFACTURER: ELTERMA / IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR: 1988 CONDITION: New, unused; requires new control cabinet Rcjdsm E Tvhepfx Anpjh Charge dimensions: 610x900x500 mm Maximum load: 500 kg Operating temperature: 150-750°C Approximate chamber heating time to 550°C: 30 minutes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, CNC stružnica Okuma LB 3000 EX II-MY C 450 Nadzorna enota: OSP-300LA Letnik proizvodnje: 2018 Notranja številka stroja: 77 Največji premer obdelovanca nad ležiščem: 580 mm Največji premer obdelovanca nad suportom: 470 mm Gib X-osi: 260 mm Gib Y-osi: 120 mm Gib Z-osi: 510 mm Gib C-osi: 360 mm Največji premer obdelovanca: 340 mm Največja dolžina obdelovanca: 450 mm Število vrtljajev glavne vretenske gredi: 45 – 5.000 vrt/min Vpenjalna glava: BMT Rjdpez D Tt Tsfx Anpsch Menjalnik orodij: V12 (pogonska različica) Oprema: - Sistem za odvajanje stržkov - Funkcija »One touch IGF« - Sistem za nastavljanje orodja na dotik - Glavna vretenska gred Kitagawa B210 - Sistem za hlajenje

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-8 - Spindle speed: 3,000 [rpm] - Max. bar capacity: 80 [mm] - Max. machining diameter: 300 [mm] - Max. swing over bed: 520 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle speed: 6,000 [rpm] - Max. bar capacity: 53 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Stroke: 520 [mm] TURRET - Number of positions: 12 - Travel X/Z: 230 / 460 [mm] - Driven tool speed: 4,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 22.5 [kVA] Rcodpfouhbnnex Anpjh WEIGHT AND DIMENSIONS - Space requirements: 3,050 x 1,860 [mm] - Machine height: 1,850 [mm] - Machine weight: 5,500 [kg] ACCESSORIES - Control: OSP-P300L-R - Coolant tank * with high-pressure pump - Chip conveyor - Parts removal - Parts conveyor belt - Bar feeder: Top Automation FU352 - Fire extinguishing system * * NB: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer.

Stanje: rabljeno, Miza stroja iz portala DROOP & REIN Namizna plošča z T-utorami iz jeklene litine Namizna enota z namizno ploščo in zelo robustno vodilno tirnico Površina namizne plošče: 5500 x 2000 mm Rcsdpfjthuzpsx Anpjh Gib stroja namizne plošče: približno 3100 mm Višina mize/višina konstrukcije: 1050 mm Obremenitev mize: največ 20 ton Kroglična vijak: premer 100 mm Korak navoja: 20 mm (eno navojno) - Obdelovalna miza, ki je na podnožju zelo stabilno vodena - Kovinska teleskopska pokrovna plošča vodilne tirnice - izvira iz portala DROOP & REIN - Gib mize v vzdolžni smeri prek krogličnega vijaka in servo motorja SIEMENS - Površina namizne plošče z 11 T-utorami, širina 28 mm - Pogon prek servo motorja SIEMENS 1FT6134-6AB71-1AG2 z enkoderjem IC200448S/R (številka serije 000 B25) Skupna dolžina: 9500 mm Širina: 2000 mm Višina konstrukcije: 1050 mm Lastna teža: 27 ton Dobro stanje

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Rsdpfx Anjfz U S Espoch Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: rabljeno, Leto izdelave: 2000, Višina konic 400 mm Razdalja med konicama 3.000 mm Maks. premer vrtenja nad ležiščem 810 mm Maks. premer vrtenja nad prečnim suportom 510 mm Maks. premer vrtenja v zarezi 850 mm Rodey Ty Ihspfx Anpech Krmiljenje WEILER Maks. masa obdelovanca 3.800 kg Premer vretena v prednjem ležaju 150 mm Premer vretenine 106 mm Premer planske plošče 630 mm Orodni sistem Parat Konus pinole konjička MK 6 Premer pinole 115 mm Območje vrtljajev vretena 1 - 1.800 min⁻¹ Ciklično krmiljen stružni stroj WEILER E80 x 3000, opremljen s plansko ploščo premera 630 mm, 400 mm triodnimi čeljustmi SCHUNK ROTA-S plus, držalom za izvrtalne palice, orodnim sistemom PARAT in transportnim trakom za odrezke. V obsegu dobave je vključen obsežen paket orodja. Video stroja iz tovarniške lokacije vam z veseljem pošljemo na zahtevo. Stroj je v dobrem stanju. Za dodatne tehnične podatke glejte ponudbo. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Oznake: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Stanje: dober (rabljeno), Leto izdelave: 2007, Krmilje 840 D x-os 2500 mm y-os 2500 mm z-os 1700 mm Krmilje - Siemens Sinumerik 840 D maks. teža obdelovanca - 6000 kg Premer vretena - 130 mm Hod pinole - 700 mm Rcodpfx Anewzyp Uopoh Vpenjalo orodja - ISO 50 DIN 69871 - AD maks. navor na vretenu - 1847 Nm Skupna potrebna moč - 65 kW Teža stroja ca. 45 t Prostorska zahteva ca. 10,9 x 9,3 x 5,7 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Vertikalna blokovna forma: KURTZ mod. MFV (4920 x 1274/1000 x 1240 mm) Osnovni podatki: • Leto izdelave: 2005 • Dimenzije bloka (VxŠxD): 4920 x 1274/1000 x 1240 mm • Obratovalna napetost: 3x400V 50Hz • Priključna moč: 77 kW • BLOKOVNA FORMA s pomično stransko steno • Popoln vakuumski sistem (VACUUM SYSTEM GARDNER DENVER/SIEMENS) • Hidravlični sistem REXROTH-BOSCH • Operativni silos za predhodno nalaganje blokovne forme z odpraševalnim sistemom • PLC krmilnik Siemens in kontrolna plošča na dotik HMI Siemens – zamenjana z NOVIMA leta 2019, izvajen tudi UPGRADE krmilnega programa • Panel na dotik SIEMENS TOUCH SCREEN (zamenjan za NOVEGA, z večjim zaslonom) • Tiskalnik za označevanje/datiranje blokov MATTHEWS • Sistem za iznos blokov z zalogovnikom blokov • Popolna dokumentacija • Stanje: ODLIČNO Redpsucvq Hofx Anpjch Možno je prilagoditi maksimalno višino bloka npr. na 4550-4600 mm.

Stanje: dober (rabljeno), The driven tools listed here, VDI 50, are designed for a tool turret manufactured by SAUTER. They are in good condition and fully functional, previously used on a GILDEMEISTER CTX 600 CNC lathe. Rjdpfx Anobql S Hjpjch 6 x driven tools, straight type, manufacturers NACKE + WTO, VDI 50 for SAUTER tool turret: Article No.: XVI 24275 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT Article No.: XVI 24277 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany