Udarni mlin

Hazemag AP-KH 1013

Stanje: pripravljen za uporabo (rabljen), Stožčasti drobilnik Svedala Znamka: Svedala Tip: 36/H/MC Vklj.: osnovno šasijo in oljno enoto Itedpspn I H Tofx Af Tob

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Itedpfx Asd E A I Iof Tjb Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 239 kW (324,95 KM), skupna masa: 50.500 kg, Leto izdelave: 2002, obratovalne ure: 11.245 h, številka stroja/vozila: CCC00513, 239 kW Weight: 50.5 t Ijdpfelhqhmjx Af Tetb Engine completely overhauled Undercarriage as good as new Track width: 600 mm New cylinder seals

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Itsdpfx Asua D Alef Tsb Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Iedpfxoh Nyfyj Af Tstb Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495.

Leto izdelave: 1979, Stanje: pripravljen za uporabo (rabljen), A Gebr. Pfeiffer ball mill is available. Drive power: 330 kW, diameter: 2,400 mm, length: 5,000 mm, number of motors: 2, motor weight: 180 kg, flywheel width: 3.2 mm. An on-site inspection is possible. Itjdpfev Dwirsx Af Tsb

Stanje: pripravljen za uporabo (rabljen), Čeljustni drobilnik Kleemann Ijdpfx Afeu S Tqvs Tetb Znamka: Kleemann Tip: SSTR 1250 Vhodna odprtina: 1250 x 950 mm Vključuje: Elektromotor Teža pribl. 38 ton

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Infeed opening: 620 x 350 mm Rotor diameter x width: 1,060 x 610 mm Hard rock intake: up to 180 mm Limestone intake: up to 300 mm Complete with electric drive, discharge conveyor, and steel construction Itedpfx Afolgzrhs Tsb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, najv. debelina jeklene pločevine: 16 mm, dolžina rezanja (maks.): 6.000 mm, HIDRAVLIČNE ŠKARJE LVD MVSB 62/16 Serijska številka: 18478 Leto izdelave: 06/1991 TEHNIČNE SPECIFIKACIJE Maks. debelina pločevine St45: 16 mm Dolžina reza: 6200 mm Razdalja med stebri: 6400 mm Izmaknjenost (grlo): 60 mm Itjdpfx Afjumhm Ae Tsb Območje zadnjega odmika: 1000 mm Min. kot rezanja: 0,5 ° Maks. kot rezanja: 2,5 ° Min. število rezov/min.: 6 Maks. število rezov/min.: 25 Min. zračnost nožev: 0,05 mm Maks. zračnost nožev: 1,6 mm Moč motorja: 30 kW Približna masa: 35.000 kg Dimenzije (DxŠxV): 7100 x 2400 x 3000 mm Priložena oprema: - ELGO P85 “GO-TO” krmilnik za zadnji odmik - Električna nastavitev zadnjega odmika do 1000 mm - 1x čelna podpora 2 m, ena s 90° kotno roko, čelna podpora L2000 mm - Nožno stikalo - Kroglični ležaji na mizi - Nastavljiv zadnji odmik z ročno hidravlično črpalko

Stanje: dober (rabljeno), Used radial drill SASS Mod. TRM 2200 Excellent condition, fully operational. Supplied with cube block. Maximum drilling diameter in solid cast iron: 20-22, 100 mm Maximum drilling diameter in solid steel (R=60): 80 mm Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor (rpm): 18–1600 Itsdpeikqz Ssfx Af Teb Automatic feed Maximum swing (distance from column surface to spindle axis): 2230 mm Drilling radius (min – max): 660–2505 mm Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Base table dimensions: 2490 x 1230 mm Spindle motor power: 11 HP Weight: 9000 kg