Rotacijski indeksiranje tabele

HAU RK 6-1200

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press) Bcjdsph Uk Nopfx Ag Tsw

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Bcedpfsm Ew Stjx Ag Tsw Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range from 0.01 to approx. 0.7 rpm.

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Bodjd Dhw Nepfx Ag Tjcw Pulse Duration (Time): CW / 90 ns Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm

Leto izdelave: 2024, Stanje: novo, Make: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30' Strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (LxWxH): 3200x2300x1350 mm Weight: 3780 kg Standard equipment: - EZM9910 control unit - Programmable backgauge range 750 mm via control unit - Plastic inserts for hold-downs - 1 side gauge and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Recirculating ball screw - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: Bedpfxjd R Er De Ag Tscw - Adjustable angle stop 0–180° The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Additional machines are available and ready for demonstration at our Staufenberg location. Further information is available on request.

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel Bjdolgvkijpfx Ag Tscw - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, DMG MORI DMC 1150 V Centro de mecanizado vertical CNC: Siemens CELOS Selector de modo de operación SMARTkey Año: 2017 Velocidad del husillo programable continuamente: 20–24,000 rpm Potencia del motor del husillo: 24 kW Horas de husillo: 2200 h Avance programable continuamente en ejes X, Y, Z hasta 42,000 mm/min Avance rápido X, Y, Z: 42 m/min Recorrido eje X: 1,150 mm Bodpfx Asyf Im Iog Tjcw Recorrido eje Y: 700 mm Recorrido eje Z: 550 mm Tamaño de la mesa: 1,460 × 750 mm Carga máxima de la mesa: 1,500 kg Dimensiones totales: 6,185 × 5,421 × 2,910 mm Dimensiones de transporte: 3,733 × 2,855 × 2,710 mm Peso de la máquina: 9,200 kg Selector de modo de operación SMARTkey Avance programable continuamente en ejes X, Y, Z hasta 42,000 mm/min Avance rápido X, Y, Z: 42 m/min Accesorios: - Revista de herramientas para 60 herramientas - Transportador de virutas - Sonda de herramientas Blum - Sonda de pieza Heidenhain - Mesa giratoria de 4º eje Nikken BZA CNC Z180 - Separador de niebla - Unidad refrigeradora - Refrigeración a través del husillo - Juego de 63 portaherramientas HSK - Pistola de lavado - Extractor de niebla de aceite - Documentación completa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 3.100 mm, Our industrial robots are thoroughly inspected, tested, and immediately ready for operation before delivery. Bsdpfxewlz Dbe Ag Tscw The robot comes complete with: - Control cabinet - Teach pendant - Connection cables

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Heidenhain TNC 620 V2 control Travel X/Y/Z: 760/480/480 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK40 Bsdsv Rr Hxjpfx Ag Tjcw Table size: 900 x 410 mm Chip conveyor Automation / robot

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Bsdsqhkukopfx Ag Tjcw Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Stanje: novo, Ostas 3-Roller Plate Bending Machine ORM 1070 x 110 Technical Specifications: Special features included in the price: hardened rollers electrically powered rear roller adjustment digital display Sheet width: 1070 mm Sheet thickness: max. 5.0 mm Bending sheet thickness: 4.0 mm Roll length: 1070 mm Roll diameter: 110 mm Weight: 1000 kg Dimensions (L x W x H): 2250 x 800 x 1100 mm Motor: 2.2 kW Equipment: Top and bottom rollers electrically driven Swing-out top roller Cone bending device Bedpfx Ajgkwhaog Tjcw Asymmetric roller arrangement Self-braking main motor Separate control and operation panel Safety rope CE mark