Viličar

Hanselifter E1534FH

Stanje: rabljeno, Leto izdelave: 2010, dvižna višina: 3.420 mm, prosto dvigovanje: 1.100 mm, vrsta goriva: električni, tip droga: dupleks, dolžina vilic: 1.150 mm, Lastna teža: 1.175 kg Dvižna zmogljivost: 1.500 kg Višina zgradbe: 170 cm CE-označba: da Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Transportne dimenzije (D x Š x V): 193x17x17 Za dodatne informacije se obrnite na Christiana Theißena. Proizvajalec: Hanselifter Tip: E1534FH Leto izdelave: 2010 Vrsta izdelka: Rabljeno Podatki: Maks. dvižna višina 3,42 m Maks. dvižna obremenitev 1.500 kg Dolžina vilic 1,15 m Pogon: baterija Lastna teža 1.175 kg Skupne mere (brez vilic) D x Š 1,93 x 1,70 m Višina zgradbe 1,70 m Posebnosti: Isdpfxev Tipco Aptjif bela kolesa, majhna višina 1,70 m, stojišče za voznika, prosti dvig: 1,10 m, vgrajeni polnilnik

Stanje: rabljeno, Double-head mitre saw – FOM ALVA 450 B Professional double-head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Ijdpfx Apoyyliketsif Year: 2002 Widia-tipped blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct drive: motor to widia blade Blade shaft diameter: Ø 32 mm Head tilting: 90°   45° outward   22.5° outward   Intermediate angles via mechanical stops and reading on graduated vernier First head fixed Second head movable: automatic positioning with optional manual mode Movable head automatic positioning speed: 12 m/min Movable head positioning accuracy: +/- 0.1 mm Minimum cutting length between heads: 300 mm (reducible by optional program) Maximum cutting length between heads: 4000 mm Hydropneumatic widia blade feed (adjustable feed speed – rapid return) Separate electric control panel from pneumatic system Dual servo-controlled operating pressure at low pressure Air consumption per working cycle: 28 normal litres Vertical and horizontal pneumatic clamps Misted lubrication of the cutting area Provision for chip and fume extraction (1) Operating pressure: 7 bar (adjustable) Mobile head roller conveyor (3 m) Machine in working condition.

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: Iedpswwtw Djfx Aptoif 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Iisdpfxjuiy Hro Aptof Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Stanje: rabljeno, Scrubber dryer, floor cleaning machine, sweeper - Delivery in as-is condition as inspected - Machine is supplied without battery, brush, and squeegee - Working width: 500 mm - Battery charger included - Quantity: 1 unit available Isdpfoc R S E Sox Aptoif - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hod osi X (vzdolžna os) 4300 mm Hod osi Y (prečna os) 270 mm Hod osi Z (navpična os) 300 mm Elektrovreteno 1 HSD – max 18000 vrt/min – moč 5,5 kW Kapaciteta zalogovnika orodij: 4 Kotni pogon za stransko obdelavo Iodpfx Aoy Drzhspteif Število primežev: 4 Pozicioniranje primežev: avtomatsko Teža: 1950 kg

Stanje: novo, Load capacity 500 kg. Number of suction cups: 6 units Diameter of suction cups: 215 mm Suction capacity: 8.0 m³/h Crane eye diameter: 80.0 mm Voltage: 400 V Total power requirement: 0.18 kW Machine weight: approx. 120 kg Space requirements: approx. 2400 x 1100 x 584 mm Equipment: - For horizontal transport of smooth, dry, and airtight panels - Robust steel load-bearing frame - Painted in RAL 2000, featuring a low dead weight - Galvanized longitudinal beam, length 2,400 mm - 3x galvanized crossbeams, each 1,000 mm long - 6x spring-loaded, articulated, and adjustable suction cup holders - 6x suction pads Ø 215 mm - Low-maintenance, high-quality, dry-running rotary vane vacuum pump - With a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Telescopic operating handle, extendable up to 1,000 mm from beam center - Sturdy sheet metal holder for your crane control - "Suction / Release" operation via manual slide valve - Control and safety device for vacuum lifter * Robust control cabinet * Contactor control circuit for the vacuum pump * Safety warning system with acoustic sounder * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Two-step operation for load release - Fine dust filter for vacuum pump protection - Documentation * Special accessories included: - 6x ball valves for isolating individual suction cups * Enables handling of smaller formats without the need to move suction cups or crossbeams - Small spiral connection cable * Extension length up to 3,500 mm, designed as Iisdpfx Aexak Ddoptef * Extension cable with CEE plug and coupling * Routed alongside the load chain to the lifting device

Stanje: rabljeno, Leto izdelave: 2002, vrsta goriva: plin, Obratovalne ure: 3184 h Nosilnost: 8 t Teža stroja cca 13.400 kg Hyster S180XL s Quattro drogom (plin) Višina dviga: 8600 mm / Višina stroja: 3200 mm / Prosta višina: 2150 mm Iisdpfxswx R T Ee Aptjf Osnovna nosilnost: 8 t – težišče tovora 900 mm Quattro drog = 7.000 kg – težišče 600 mm Ostanka nosilnosti: 4.000 kg pri maksimalni višini dviga!

Stanje: zelo dobro (rabljeno), Load capacity approx.: 2 t Fork length: 770 mm Fork spacing (between forks): 105 mm Iiedped D U Uaefx Aptjf Fork outside width: 400 mm Overall length: 1100 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. profile length with 3-sided machining: 7,600 mm, Y-axis travel: 845 mm, Z-axis travel: 620 mm, max. traversing speed X-axis: 63 m/min, max. traversing speed Y-axis: 60 m/min, max. traversing speed Z-axis: 60 m/min, A-axis swivel range: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2-layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for job/machining data input and documentation. Regularly maintained, on-site inspection possible. Iiedpjzbb Rrsfx Aptjf