3690-litrski grelno/hladilni reaktor iz V4A z nosilnim mešalom

HANAG 8758

GENERAL
Design: suspended
Comments: Support ring made of steel; manhole cover incomplete; on one vessel, most of the heating connections have been cut off and are loosely included; one vessel is approx. 100 mm shorter in total height due to different motor/gearbox units
Speed: 42 – 211 rpm
Internal diameter: 1,600 mm
Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be checked)
Overall height: 3,750 mm
Heating/cooling: present
Power: 3 kW
Lhodpfoxqax Eex Abbob
Max. allowable operating temperature: 200 °C
Max. allowable operating overpressure: 16.0 bar
Max. overpressure: 3.2 bar
Agitator: beam agitator
Support type: ring
Location: Bremen
Technical documentation: Drawing, various documents, inspection certificate
Cylinder temperature control: half-pipe coil
Nameplate:
Vacuum: 1.0 bar
Volume: 3,690 liters
Jacket volume: 145.0 liters
Cylinder wall thickness: 6 mm
Product-contact material: V4A 1.4435 (AISI316)
Condition: used
Cylindrical height: 1,380 mm
Previous use: pharmaceutical chemicals

VESSEL
Max. allowable operating temperature: 200 °C

HEATING/COOLING JACKET
Max. allowable operating vacuum: 1.0 bar
Bottom temperature control: half-pipe coil

EQUIPMENT
Manhole / dome: in top head (DN 500)
Outlet: 130 mm

MATERIAL SPECIFICATION
Temperature control system material: V2A 1.4301 (AISI304)

AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 400 Volt

TECHNICAL DATA / DIMENSIONS
Bottom wall thickness: 6.1 mm
Agitator arrangement: central in top head
Agitator equipment: Slight differences in agitator execution (Interprop beam agitator mounted on the shaft for media up to approx. 3000 mPas; in one of the vessels, an additional stabilizing propeller is installed on the shaft); speed range was adjustable via external frequency converter (no longer present); for one of the two agitators, this speed range is 25 – 126 rpm; partial technical documentation for the agitators available
Top head wall thickness: 7.9 mm

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.