Cestna čistilnica

Hako Citymaster 1600 4x4 Kehrm. Service Neu

Stanje: pripravljen za uporabo (rabljen), obratovalne ure: 7.808 h, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 51.892 km, moč: 55 kW (74,78 KM), prva registracija: 09/2018, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 4x4, največja dovoljena obremenitev: 1.600 kg, lastna masa: 1.900 kg, naslednji pregled (TÜV): 01/2028, gorivo: dizel, medosna razdalja: 1.600 mm, voznikova kabina: drugo, vrsta prenosa: hidrostat, emisijski razred: Euro 5, Oprema: filter saj, hidravlika, klimatska naprava, pogon na vsa štiri kolesa, Hako Sweeper Citymaster 1600 From 1st owner – Ex-municipal/government vehicle Major engine service including timing belt, water pump, oil, oil filter, fuel filter was carried out at 51,892 km in 10/2025 Machine version with new drive pedal system Guodpfx Afexcaagewsb 3,952 sweeping hours 7,808 total operating hours 51,892 kilometers 4×4 all-wheel drive – Hydrostatic all-wheel drive system Reversing camera Stainless steel debris container Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Empty weight approx. 1,900 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable operating speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics: - Circuit 1 (Front): 0–50/0–70 l/min, 225 bar - Circuit 2 (Rear): 0–20/25/30 l/min, 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3,500 kg Empty weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brush, snow plow and lawn mower (not included) Subject to errors, changes and prior sale. We sell exclusively according to our terms and conditions and exclude any warranty. Errors, changes and prior sale reserved. We are available non-stop Monday to Friday from 9:00 am to 5:00 pm, Saturday by appointment; outside these hours, telephone appointments are possible. We are happy to take your current used equipment/vehicle in trade-in. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle stock. The above information is non-binding. Errors, changes and prior sale excepted!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 160 mm, največja širina rezanja: 700 mm, vrsta nastavitve višine: mehanski, skupna dolžina: 17.000 mm, skupna širina: 2.500 mm, skupna višina: 1.000 mm, pogonska enota žage: 31.000 W, Dvojna krožna obrezovalna žaga s transportnimi valji proizvajalca Paul Tip: PKAH Leto izdelave: 1989 5 metrov pogonjenih transportnih valjev 2x 5 metrov nepogonjenih transportnih valjev s stranskim odjemnim trakom za deske Godpfx Afjwa T Dceweub Skupne mere (D x Š x V): 17 x 2,5 x 1 m Možno je obrezovati deske do širine 70 cm in debeline 16 cm Širina nastavljiva električno. Višina nastavljiva mehansko 400 V Maks. 63A 31 kW V primeru interesa ali vprašanj nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2013, skupna masa: 1.145 kg, nosilnost: 240 kg, doseg roke: 2.900 mm, model krmilnika: KRC4, Oprema: dokumentacija / priročnik, Obseg dobave/dodatki: mehanika, komandna omara, upravljalna plošča, povezovalni kabel. Gusdpfstr E T Nox Afwob

Stanje: novo, Bending length: 1600 mm Sheet length: 1600 mm Top roll diameter: 140 mm Sheet thickness: 6 mm Technical specifications: - Hardened and polished rolls - Full body construction made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulic head cover for easy material removal - Digital display for lower and side roll position - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically driven - Mobile control panel Gujdsd Ab Smjpfx Afwsb - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 4,580 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have an extensive list of references!

Stanje: novo, Load capacity per rack 24,000 kg Load capacity per level 2,000 kg Number of storage levels 2 x 6 pcs. Gjdpefgyhgjfx Afwoub Recommended material length 3,000 mm Upright distance 1,500 mm Rack height 2,440 mm Dimensions L x W x H: m The most suitable solution for storing long materials with 2 columns. - Each compartment can be swung outwards, allowing loading and unloading with the overhead crane at any time. - Double-sided design. Galvanized tray made of 2 mm steel sheet, length 3,000 mm: €301 Galvanized tray made of 2 mm steel sheet, length 3,000 mm, with cut-out: €333 Distributor for tray, steel: €54.00 Distributor for arm, steel: €54.00 Distributor for tray, stainless steel: €69.00 Distributor for arm, stainless steel: €69.00

Stanje: novo, Bending length: 2100 mm Sheet thickness: 6 mm Top roll diameter: 160 mm Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel Gusdpfod Ab Slox Afwsb - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll driven hydraulically - Movable control panel - Compliant with CE standards Options: - Variable rotation speed: EUR 4,681 - Sheet feeding table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 4,600 - Automatic material extractor - PLC control - CNC control - Automatic sheet loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 11 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.500 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 200 l, nazivna (navidezna) moč: 100 kVA, največja hitrost vrtenja: 1.500 obr/min, Agregat za elektriko 80 kW / 100 kVA – NOVO – AVR – Pripravljen za ATS – 400V Stanje: Popolnoma nov, neuporabljen Dobavljivost: Na zalogi Tehnične specifikacije: Neprekinjena izhodna moč: 80 kW / 100 kVA Napetost: 400V / 50 Hz Sistem regulacije napetosti: AVR (Avtomatski regulator napetosti) Godpfx Afoxuvc Usweub Pripravljen za povezavo z ATS (Avtomatsko preklopno stikalo) Primeren za rezervno napajanje ali neprekinjeno delovanje Dodatne možnosti: Avtomatsko preklopno stikalo (ATS) – Generator / Omrežje: na voljo za doplačilo 800 € Komercialne informacije: Cena vključuje popolnoma sestavljen, pripravljen za uporabo agregat Prevoz, montaža in zagon na zahtevo

Stanje: novo, Bore diameter variable, mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Götzinger Power Drill in special design with dowel gluing and insertion station With the Götzinger PowerDrill, depending on the type and configuration, you can: - Drill on face and longitudinal sides - Dowel door leaves, mounting timbers, transoms - Freely program drilling patterns - Drill for handle olives and corner bearings with quick-change multi-spindle drilling heads - Mill and drill lock cases, handles, euro-profile cylinders (PZ), and 3D hinges - The machine is equipped with both horizontal and vertical milling units - Easy control system allows you to create, save, and recall drilling and milling programs POWER DRILL – Drilling and Milling Machine Universal drilling machine for drilling olives, corner bearings, doweling on the face and longitudinal sides, milling, lock cases, hinges, etc. Base frame in robust construction, sheet metal cladding Table support: 1800 x 200 mm Machining unit: X-axis – 500 mm effective travel Y-axis – 100 mm Guedpfxed Ih Hys Afwsb Z-axis – 105 mm 1 horizontal drilling unit (left dowel drilling unit) Drill motor 380 V, 1,100 W Collet chuck d=8/10 4,000–11,000 rpm, adjustable 1 vertical drilling unit from above – fixed mount Drill motor 1.1 kW, 3,000 rpm Quick-change drill head system 1 quickly changeable BKF 2/3 drill head, for corner bearings Includes spare drill bit and customer-specific fittings Control: electro-pneumatic with three axes, NC positioning controller, integrated machine functions Input via TFT 10" color display Machine complete, CE-compliant, with 1 set of drilling tools: Each dowel size 1 x d=6, 8, 10, 14 mm, plus 2 rough cutters d=16 mm, 1 cutter d=20 mm, ready for connection 1 BKF 3 drill head, quick-change, for olives, including spare drill bit, customer-specific fittings 2 drilling units: 1 x horizontal for overhead drilling (for hinges) 1 x vertical for doweling, right side Drill motor 1,100 W, infinitely variable speed 4,000–11,000 rpm with ER 20 collet chuck 2 milling units for lock cases: 1 x horizontal for hinges, lock cases 1 x vertical from above for euro-profile cylinder (PZ), handles, hinges Milling motor 2.2 kW Speed adjustable 3,000–16,000 rpm ER 25 collet chuck 1 length stop, left and right, usable length 2.8 m, NC-controlled When using the length stop, fixed stops are not used. Dimensions: LxWxH = 2.50 x 1.50 x 2.20 m – machine weight 850 kg PowerDrill LxWxH = 0.30 x 0.30 x 6.00 m – length stop weight 100 kg 1 dowel gluing and insertion station consisting of: - Vibratory feeder drive for dowel supply - Dowel insertion station - High-pressure stainless steel glue pump with glue tank - Full jet valve for precise clean glue application - Blow-off nozzle Additional price for 1 dowel diameter This increases the base machine length by approx. 300 mm (Technical data according to manufacturer – subject to change and without guarantee!)

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja višina reza: 125 mm, • 125 mm višina reza • 750 mm prehodna širina • Žagalna gred na novo ležajena • 18,5 kW pogonski motor Gusdjw Slwkepfx Afweb • 1 fiksna puša • 1 letvena puša pribl. 300 mm uporabne vpenjalne dolžine • 1 nastavljiva puša • 50 mm premer žagalne gredi • Mehansko nastavljanje višine zgornjih valjev • Vibracijski žleb v stroju • 10 ukrivljenih žaginih listov • 0–50 m/min brezstopenjska podajalna hitrost • Stroj pregledan v delavnici • Stroj na novo prebarvan • Pribl. 5 m dolg valjčni transport pred žago • Pribl. 4 m dolg valjčni transport za žago

Stanje: novo, A device for storing and feeding logs onto a sawmill table. Systematic material feeding to the saw increases its efficiency and eliminates the need for an additional operator. Dimensions: Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm (optionally longer) Log length: 1000–2500 mm Log diameter: 100–400 mm Feed rate: adapted to the intake conveyor LOG FEEDER A device for storing and feeding logs onto the table of a frame saw machine. Targeted material supply to the frame saw improves efficiency and removes the need for additional personnel. Guedpfx Aewavrcjfweb Dimensions: Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm Log length: 1000–2500 mm Log diameter: 100–400 mm Feed rate: matched to the infeed