Krog slovesu tabele

Hahn+Kolb

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Brez minimalne cene – zagotovljeno prodaja po najvišji ponudbi! Nakladanje: 01. 12. do 10. 12. TEHNIČNE PODROBNOSTI Podatki o vrtanju Dolžina vrtanja: približno 700 mm Višina vretena nad ležiščem: 160 mm Premer vrtanja nad ležiščem: 320 mm Višina vretena nad oporo: 100 mm Premer vrtanja nad oporo: 200 mm Premer vretena: približno 36 mm PODROBNOSTI O STROJU Proizvajalec: Hahn in Kolb Nlodpe Ad E Suefx Anpjh Vrsta stroja: Rezalni in vlečni vretenčni stružni stroj Dolžina: 1.800 mm Širina: 500 mm Višina: 1.500 mm Teža: 1.000 kg

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) Njdpfx Ansgwbbqepjlh No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: rabljeno, 4-vretenasta vrtalna glava, nastavljiva večvretenasta vrtalna glava tipa V 604 G Št. izdelave: 4220 Vrtalna zmogljivost na vreteno: 6 mm Število vreten: 4 Prestavno razmerje: 1:1 Razdalja med vreteni (od sredine vretena do sredine vretena po diagonali): 45 do 138 mm Pogonski mehanizem vrtalne glave: 6 x 20 mm Centrirni prirobnica na pogonu: Ø 89,7 mm, 6 x navojne luknje M8, razdalja med luknjami = 105 mm Nastavek za orodje: Ø 6 mm, vpenjalne puše Višina od spodnjega nastavka za orodje do ohišja menjalnika, zunanji rob na vrhu: 218 mm - 4 pogonski mehanizmi za vretena z nastavkom za vpenjalne puše (vpenjalne puše niso vključene v obseg dobave) - 4 vretena za orodje, nastavljiva po korakih z obračanjem v razmiku med vreteni - Idealna za 4 vrtine v kvadratni razporeditvi od 32 x 32 mm do 97 x 97 mm Dimenzije: Ø x V: 170 x 218 mm Nljdpfx Ajz Hfclsnpsh Teža: 7,7 kg Dobro stanje.

Stanje: rabljeno, Premer mize 450 mm Obseg nagiba 90 stopinj Višina mize 450 mm Število T-utorov 8 kos Teža stroja ca. 140 kg Mere D x Š x V 0,9 x 0,8 x 0,6 m Delilna miza z: Nsdpoyx Iqnjfx Anpolh - Rotacijska in nagibna os - Osi se premikajo preko ročnega kolesa - Obe osi se lahko fiksirata

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Nedpfjh Ryhnox Anpjlh Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: rabljeno, Število predalov: 10 kosov Nosilnost: približno 90 kg Dolžina x širina x višina: približno 1020 x 550 x 1185 mm velika uporabna površina predalov popoln izmet predalov (100 %) Nedpjz A H H Rsfx Anpslh vodila za predale s krogličnimi ležaji posamična blokada izmeta možnost posamičnega zaklepanja za vsak predal skupna višina: približno 1185 mm, vključno z osnovo. višina osnove: približno 140 mm Na zalogi sta 2 kosa! Na zalogi so tudi druge opreme za delavnice: omare s predali, delovne mize, jeklene omare.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, obratovalne ure: 4.109 h, številka stroja/vozila: 4113, skupna masa: 6.600 kg, Hidravlična upogljalna stiskalnica Proizvajalec: DoneWell, Hahn & Kolb Stuttgart Tip: 80 - 2500 Letnik: 1989 Nadzorni sistem: Cybelec, model Eva Pac Maksimalna delovna širina: 2500 mm Nlsdpozyanljfx Anpoh Maksimalna sila: 100 t Zadnji opornik: 750 mm z 2 opornima prstoma Stanje: dobro Matrica: večnamenska, V 7, za upogibanje pod kotom Orodja

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space Njdpfx Anjdh Tfgopjlh

Stanje: rabljeno, Višina konice / mm Teža 160 kg Nljdpfx Aney S Dylopjh Premer 500 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 542, Equipment: Precision six-jaw chuck Cylindrical grinding device Part positioning device Nledpfx Anszutnzjpsh Coolant system Grinding wheel arbor – grinding wheels Operating manual

Stanje: rabljeno, Motor power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you from stock, subject to prior sale and errors: DECKEL Nedev Nq Skepfx Anpjlh Universal Tool Milling Machine with FAGOR 3-axis Digital Readout Type FP 3 Year Serial No. Table travel: longitudinal, motorized / manual 490 / 500 mm vertical, motorized / manual 370 / 380 mm Transverse milling slide travel, motorized / manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Installation height under spindle 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feed rates 10 – 500 mm/min Rapid traverse 1,500 mm/min Spindle drive motor 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special features • FAGOR 3-axis digital readout V 300 (glass scales) with advanced functions such as chain dimensions, absolute dimension, mm/inch switching, etc. • Movable DECKEL universal vertical milling head, tiltable +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacer rings, driving dogs, clamping devices, operating tools, etc. • DECKEL large, fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various index plates • Additional manual DECKEL universal rotary table ? 380 mm with direct and indirect indexing, various index plates • Coolant equipment, chip tray, central lubrication, separate control cabinet, operating manuals Condition: Very well-maintained condition! Ideal machine for training workshops or small batch production! Please click here for a video of the machine: FP3/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, A conventional precision surface grinding machine with NC control is available. Resolution: 0.001 mm, travel distance X/Y/Z: 1200 mm / 550 mm / 400 mm, table dimensions X/Y: 1600 mm / 450 mm, table feed: 30 m/min, max. table load: 750 kg, spindle-to-table distance: 800 mm, Y-axis feed: 180 mm/min, Y-axis precision: 0.001 mm, Z-axis feed: 1200 mm/min, Z-axis precision: 0.3 mm, speed: 2800 rpm, grinding wheel dimensions X/Y/Z: 400 mm / 100 mm / 127 mm. Machine dimensions X/Y/Z: approx. 6500 mm / 3000 mm / 2500 mm, weight: approx. 6700 kg. Documentation is available. An on-site inspection is possible. Nlsdpfowaa Iuex Anpjh

Stanje: rabljeno, Leto izdelave: 1990, Teža 1,3 t Dolžina hoda 40 mm Njdjzndt Uepfx Anpolh Cilinder 0–0,5 Hitrost hitrega pomika 3,7 m/min

Stanje: kot nova (razstavni stroj), A fully hydraulic WIEGAND demonstration folding machine with NC-10 control manual or automatic bending mode automatic mode: Nsdpfxepgmqie Anpolh Clamping beam closes, bends to preset angle, clamping beam opens Bending beam or clamping beam can be adjusted manually according to sheet thickness adjustable clamping beam opening width back gauge manually adjustable CE standard Documentation included Bending length: 2500 mm Bending capacity: 2.5 mm max. bending angle: 0 – 120° Back gauge manually adjustable min/max: 60/1000 mm Power: 3.0 kW Weight: 2,500 kg Technical data and dimensions: subject to change without notice For further technical data, please refer to the PDF document.

Stanje: pripravljen za uporabo (rabljen), Vertical bandsaw Hahn + Kolb with Ideal bandsaw blade welding unit and filing machine Nljdpfxory U Nhe Anpoh