HAAS VF-8

HAAS VF-8

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, največja hitrost vretena: 7.500 obr/min, moč vretenovega motorja: 15.000 W, število osi: 3, To 3-osno vertikalno obdelovalno središče HAAS VF-8 je bilo izdelano leta 2003. Ima obdelovalno območje 1626 x 1016 x 762 mm, moč vretena 15,4 kW in maksimalno hitrost vretena 7500 min⁻¹. Opremljeno je z BT-40 držalom orodja, menjalnikom orodij z 24+1 pozicijami ter polžnim transporterjem odrezkov. Če iščete kakovostni rezkalni stroj, razmislite o stroju HAAS VF-8, ki ga ponujamo v prodajo. Kontaktirajte nas za dodatne informacije. Djdpfx Apsx D H Ruolout Tehnične specifikacije Stožec BT 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Pomik X/Y/Z: 1000mm/500mm/635mm, držalo orodja: BT40, hitrost vrtenja: 10.000 obr/min, mesta za orodja: 40, krmiljenje: Haas, ure vretena: ca. 4500h. 3-osni robotski sistem System 3R WorkPartner, leto izdelave: 2005, prenosna teža: 80kg, hod: 1500mm, mesta za palete: 20. Vključuje ničelno vpenjalni sistem System 3R GPS 240, merjenje orodja, kontrolo loma orodja, 3D merilno tipalo Renishaw in odsesavanje oljne meglice. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dujdpfoxg Riasx Aplot

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 14.982 h, Funkcionalnost: popolnoma funkcionalen, Haas VF-8/40, letnik 2008 Stroj je bil kupljen leta 2008, je delujoč in se lahko normalno uporablja. Dodsxcvz Hjpfx Apljut Vsa orodja in dodatna oprema so priloženi. Ostale tehnične podrobnosti so razvidne iz priloženih slik. Ob zanimanju je možen dogovor za ogled.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 12.000 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 720 mm, skupna višina: 3.376 mm, obremenitev mize: 2.500 kg, skupna masa: 16.300 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 33.000 W, teža orodja: 8.000 g, največja dolžina izdelka: 5.480 mm, število osi: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 positions and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table: 140 mm • Max. distance spindle nose to table: 860 mm • Work spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • Occupied adjacent pockets: 80 mm • Free adjacent pockets: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s Dusdpfxox Nkp Ue Aplot • Utilities • Connection voltage: 380/400/415 V +10% • Mains frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank volume: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Fixture for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Travel motor for linear axis • Travel motor for rotary axis • Cylinder for swiveling unit

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Dedpfx Aocblc Soplout Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 12.959 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 12.000 obr/min, skupna višina: 2.450 mm, skupna širina: 2.400 mm, skupna dolžina: 3.100 mm, širina mize: 630 mm, dolžina mize: 630 mm, obremenitev mize: 350 kg, skupna masa: 6.800 kg, Kunzmann WF 650 5-Axis Machining Center, Simultaneous (2009) Manufacturer: Kunzmann Model: WF 650 5-Axis Machining Center, Simultaneous Year of Manufacture: 2007 Commissioning: 2009 Condition: Used, very good Machine ON hours: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Dusdpjxwl T Usfx Aplst Software package 1 for iTNC 530 X-axis: 650 mm Y-axis: 500 mm Z-axis: 450 mm Swiveling range of vertical milling head: -5° to +95° NC rotary table diameter: 630 mm Table load capacity: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 tools ICU: Tool clamp with coolant supply and air blast device through the spindle, delivery rate 25 l/min at 40 bar Selectable water/air through the spindle Paper band filter CNC-controlled milling head (B-axis) Preparation kit for probe TS 640 3D probe with infrared transmission Dimensions (LxWxH) approx.: 3.1 x 2.4 x 2.45 m Weight approx.: 6,800 kg Coolant system (LxWxH) approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine levelling feet – Machine lamp

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Speed range: 0–600 and 600–4000 rpm, stepless Feed rate: 1 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface of the table: 1100 x 600 mm Table feed: 1 – 3000 mm/min, stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH) approx.: 2.9 x 2.2 x 2.5 m Additional technical data: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang, min./max.: 200 / 750 mm Equipment: Dujdpju Nda Esfx Aplst - Coolant tank with pump - Handheld control device - Heidenhain linear measuring system

Leto izdelave: 2014, stanje: dober (rabljeno), For sale: Nilfisk Compact Industrial Safety Vacuum Cleaner Model CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg ATEX-certified (explosion proof) Djdpehu Sf Hjfx Aplout The vacuum cleaner is in good condition and ready for immediate use. Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality, yet affordable metalworking machine for your manufacturing operations? Or are you looking to sell your equipment? For more information or ways to contact us, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2005, Horizontal Machining Center Machine Type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of Manufacture: 2005 TECHNICAL DATA: Travel distances: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse (X/Y/Z): 50 m/min Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool stations: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirements (LxWxH): 9,200 x 4,900 x 3,920 mm Duedpfx Apjv Nhyljljt Equipment features: Through-spindle coolant (IKZ): bar Chip conveyor High-pressure pumps

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Universal Milling Machine Manufacturer: KUNZMANN Model: WF 650 Year of manufacture: 2007 Technical Data Manufacturer: Kunzmann Model: WF 650 Year: 2007 X-axis travel: 650 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speeds: 5 - 6500 rpm Quill stroke: 60 mm Swiveling vertical head: +/- 90° Table load: max. 400 kg Feeds (longitudinal/cross/vertical): 0 - 4000 mm/min Rapid traverse: 25 / 25 / 20 m/min Distance table / vertical milling spindle: 100 / 550 mm Distance table / horizontal spindle: 270 / 720 mm Number of tool magazine stations: 20 Tool diameter: 95 mm Tool diameter with 2 free spaces: 135 mm Tool length: max. 300 mm Tool weight: max. 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions (L x W x H): 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 CNC control - Operating manual - Full enclosure - Vertical head with extendable quill - Hydraulic tool clamping - Fixed table - Electronic hand pendant - Coolant system - Chip conveyor All information without guarantee. A demonstration is possible at any time in our exhibition hall. Dusdpfswhm S Nsx Aplst