Vertikalni obdelovalni center

HAAS TM1

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Vertikalni rezkalni stroj Haas TM 1 HE, leto izdelave 2007, Dkjdpfx Aozh Unpjbgop vodenje Haas CNC, pomik X/Y/Z 762/305/534 mm, velikost mize 1213 x 267 mm, hitrost vretena do 4.000 min⁻¹, stožčasta vpenjalna glava BT 40,

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machine repainted in white in 2014 (per SIEMENS ENERGY specification) Technical Data Working Area - Max. swing diameter over bed: 570 mm - Max. swing diameter over cross slide: 365 mm - Max. turning length: 1500 mm - Centre height over flat bed: 280 mm - Max. workpiece weight: 400 / 1000 kg - Max. clamping length: 1300 mm Spindle - Spindle head as per DIN 55027, size 8, internal taper 70 - Spindle bore: Ø 62 mm - Spindle diameter in front bearing: 100 mm - Spindle length (depth): 200 mm - Max. chuck diameter: Ø 315 mm - Speed range: 3–2500 rpm - Max. faceplate diameter: Ø 560 mm - Max. faceplate speed: 700 rpm - Max. torque: 1800 Nm Cross Slide – Travel - Longitudinal travel (Z-axis): 1160 mm - Cross travel (X-axis): 345 mm - Tool system Parat-3 - Tool size DIN 770 (h x b): 32 × 25 mm Dkedpex Ahx Defx Abgjp Tailstock - Manual tailstock adjustment - Quill taper: MK5 - Quill diameter: 80 mm - Quill stroke: 190 mm Accessories / Special Equipment - Control: SINUMERIK 810 D - 32-bit processor, digital control - ManualTurn with cycle support - 10.4’’ colour LCD monitor - Operating manual 094.0003.1330-00 - 3-jaw chuck Ø 315 mm - Faceplate Ø 350 mm (up to Ø 560 with thin plates) - Radius turning - Turret: Parat size 3, 4-position, 4 × 90° manual indexing - Chip conveyor Bürener Maschinenfabrik - Particularly suitable for: see manufacturing range Cycle lathe DUS560TI (APL 11301) Includes one combined 4-jaw Wescott chuck with fitted jaw set A tool holder (Tripan) is installed – without tools or tool holders One fixed steady rest Chip conveyor with coolant tank and integrated pump The machine is in operation. Currently, no significant defects or limitations in use are known. Operating manual is available. An internal assessment inspection report from 2017 and the machine data sheet are attached.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Število osi: 3, dimenzije mize: 1210x267 mm, največja hitrost vretena: 4000/min, teža: ca. 2t. Ogled na lokaciji je mogoč. Dsdpfx Aboy Uyf Aegjkp

Stanje: rabljeno, X-os: 30,0 in / 762 mm Y-os: 16,0 in / 406 mm Z-os: 16,0 in / 406 mm Dsdpfx Abeiypzdjgjkp Pripravljen za pregled Pripravljen za dostavo

Stanje: zelo dobro (rabljeno), Maximum turning diameter over bed: 575 mm Dksdewlgdyepfx Abgop Maximum turning diameter over carriage: 525 mm Maximum turning diameter over cross slide: 300 mm Distance between centers: 2000 mm Spindle bore diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum top slide travel: 140 mm Maximum tailstock quill travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, obratovalne ure: 14.923 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 305 mm, pomik po osi Z: 534 mm, dolžina podajanja os X: 762 mm, dolžina pomika po osi Y: 305 mm, dolžina podajanja os Z: 534 mm, vrtilni moment: 45 Nm, proizvajalec krmilnikov: Haas, skupna višina: 2.700 mm, skupna dolžina: 2.200 mm, skupna širina: 1.750 mm, širina mize: 267 mm, dolžina mize: 1.213 mm, največja hitrost vrtenja: 6.000 obr/min, skupna masa: 1.315 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 5.600 W, nos vretena: CT40/ISO/BT40, število vreten: 1, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Three-axis vertical CNC milling machine Haas TM1 (TM-1) equipped with a 6000 RPM spindle. This machine is sold by Haas service technicians with 10 years of experience. The machining center has undergone a full, comprehensive inspection, has been refurbished, and is ready for immediate operation. The machine is sold with a sales contract (KS), and a VAT invoice can be issued. A twin machine will soon be available for sale, with the option to purchase both simultaneously. It is possible to sell the milling machine with installation and precision analysis using an advanced Renishaw Ballbar system, performing circularity tests with an accuracy of 0.0001 [mm]/0.1 [μm]. We provide after-sales technical support for the machine if needed! We assist with transport and financing arrangements! The milling machine is equipped with several additional options: - Upgraded spindle speed up to 6000 RPM, - Rigid tapping, Dsdpfxsyanlaj Abgjkp - Zero-point tracking (rotation & scaling), - Spindle orientation M19, - Macro programming, - HSM (high speed machining), - Intuitive part programming system, - Possibility to activate the 4th axis with inverter and wiring (option to sell separately), - Air blasting cooling. Technical specifications: - Machine type: Three-axis vertical milling machine Haas TM1 - Year of manufacture: 2005 - Spindle speed: 6000 [RPM] - X-axis travel: 762 [mm] - Y-axis travel: 305 [mm] - Z-axis travel: 534 [mm] - Table size: 1213 x 267 [mm] - Minimum spindle-to-table distance: 102 [mm] - Maximum spindle-to-table distance: 636 [mm] - Dimensions (W x D x H): 220 x 175 x 270 [cm] - Weight: 1315 [kg] - 3 T-slots, 16 [mm] wide - Spindle motor power: 5.6 [kW] - Maximum torque: 45 [Nm] - Spindle taper: CT40/ISO/BT40 The machine has been fully serviced. Ballscrews, linear guides, lubrication system, spindle, spindle motor, encoder, vector drive, inverters, IO board, processor board, all components in the electrical cabinet, axis drives, tool changer, controller, and many more have been checked. Feel free to contact us. We also offer importing on request and pre-purchase inspection of all Haas lathes and mills including the VF, VM, DT, DM, Mini Mill, EC, UMC, ST, DS, SL, TL series and many more.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), A CNC precision parallel lathe Pinacho is available. Center height: 180 mm, distance between centers: 750 mm–1000 mm, turning diameter over bed/cross slide/top slide: 360 mm/335 mm/198 mm, bed width: 250 mm, spindle bore: 42 mm, spindle speed: 4000 rpm, feed rate X/Z: 10 m/min, rapid traverse X/Z: 10 m/min. Tailstock quill diameter: 58 mm, tailstock quill travel: 200 mm, Morse taper: MT3, min. steady rest/follow rest passage: 10 mm, max. steady rest/follow rest passage: 70 mm/114 mm, control: Fanuc 0i. Documentation available. On-site inspection possible. Dkedpfx Aswftcvjbgjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Precizni stružnica Schaublin 125 C Leto izdelave: 1987 Višina konic: 125 mm Razdalja med konicama: 500 mm Obratov na minuto: 45 - 3000 rpm Dsdpfxey Avyxo Abgskp Podajalna hitrost: 4 - 260 mm/min Vretenova glava: Camlock D1-3" Konus konjička: MK 2 Premer struženja nad posteljo: 250 mm Premer struženja nad čelnim suportom: 120 mm Hod zgornjega suport: 100 mm Hod prečnega suport: 180 mm Dimenzije (Š x G x V): 1500 x 850 x 1300 mm Teža pribl.: 950 kg Dodatki/možnosti: nosilci orodja vpenjalna glava Röhm 125 mm dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 2000, Cylindrical Grinding Machine Studer Universal S30 leanPRO Studer S30, Dedpfx Aboyx Hgzsgjkp Year of manufacture: 2000 Machine hour counter Regular maintenance intervals by manufacturer (last maintenance 11/25, report available) Grinding wheel replacement: at manufacturer’s specified intervals Hydraulic inspection: annual test Buffer battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for elevated centers Table swiveling: 11° Glass scale on X- and Z-axis Paper belt filter unit Workpiece headstock: approx. 1-1,000 rpm Internal grinding device with accessories LED spotlight with flexible arm Grinding wheel: 400 x 80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Live center and MT4 included Workpiece headstock: MT5 taper Tailstock: MT3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300 x 1,550 mm Machine height: approx. 2,000 mm Electrical supply Digital measuring system Coolant supply with filter fleece, tank capacity 300 L Machine hour counter control on: 35,978 h

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), število osi: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated digital XY and angular readouts for precise measurements. The device is equipped with a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision engineering. Contact us for further information on this machine. Dkodox D I Etjpfx Abgsp • Laterally correct image (no mirror inversion) for easy evaluation • 3-position objective turret for rapid magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary table Type 2 • Maximum workpiece height: 100 mm • Integrated XY and angular digital display for precise readings • Illumination: combination of contour (transmitted light) and vertical (incident light) • Light source: 24 V / 150 W halogen for high-quality projection • 4-position condenser in transmitted light mode with automatic illumination adjustment for magnification • Optics: semi-transparent mirror for clear incident light images; telecentric lenses for distortion-free imaging across the entire field • Focusing via movable optical head (table remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; tilt/surface illumination ±0.15% • Robust construction with precision-engineered guides; workshop-suitable and easy to operate • Proven Nikon quality, made in Japan • Large projection area, suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision engineering, and sample inspection • Flexible upgradability with digital interfaces or SPC connectivity