Brusilni stroj za zobnike

Höfler Supra 1503

Stanje: rabljeno, Prodam rabljeni 5-osni laserski stroj Trumpf / prodam rabljeni 3D-laserski stroj. Guedpofuah Nefx Ab Ejh Trumpf TLC Cut 5 Letnik 2006 Popoln servis, izvajajo ga dvakrat letno pri podjetju Trumpf UK. Zadnji servis: januar 2019. Nameščena nova vakuumska črpalka – 28. 05. 2019. Delovni čas: Laserska žarka vklopljena: 14.922 ur. Laser vklopljen: 59.480 ur. Moč: 3,2 kW. Izveden popoln servis. V ceno sta vključena pripomoček za obdelavo in delovna površina. Možna je ureditev dostave in namestitve.

Stanje: rabljeno, Leto izdelave: 2008, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Z-axis travel: 800 mm X-axis travel: 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Guodpfx Aevvtpxsb Esh Rapid traverse speed C-axis: 1000 rpm Tool turret – number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions approx. LxWxH: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features a C-AXIS, E-axis, Y-axis, and W-axis Driven tools can be used at all turret stations Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooler With hinge belt chip conveyor Chip tray Compressed air gun Machine is offered WITHOUT chuck as shown!

Stanje: rabljeno, Leto izdelave: 2016, x-axis 6,800 mm y-axis 4,000 mm z-axis 1,500 mm Control: iTNC 530 HSCI Heidenhain Max. clearance between columns: 5,090 mm Distance spindle centre to table: 1,825 mm Type: 175149A-0007 Main spindle speed range: max. 19,800 rpm Main spindle drive power: 20 kW Tool holder: HSK-A63 Swivel range B-axis: +115° / -115° Rotary range C-axis: +/- 200° Type: 178099-0005 Main spindle speed range: max. 10,020 rpm Main spindle drive power: 20 kW Tool holder: HSK-A100 Swivel range B-axis: +115° / -115° Rotary range C-axis: +/- 200° Clamping table area: 6,000 x 3,000 mm Max. table load: 50.0 t Height above floor: 100 mm Number of T-slots: 12 T-slot width: 28H12 mm T-slot spacing: 250 mm Number of tool positions: 62 (38+24) pos. Number of tool positions HSK A63: 37+1 pos. Number of tool positions HSK A100: 23+1 pos. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 mm Max. tool weight HSK A63: - kg Max. tool diameter HSK A100: 80 mm Max. tool length HSK A100: 450 mm Max. tool weight HSK A100: - kg Rapid traverse (X / Y / Z): 40,000 mm/min Rapid traverse B/C: 4,320 °/min Feed rate X/Y/Z: 30,000 mm/min Feed rate B/C: 2,160 °/min Max. acceleration: 3.2 m/s² x-axis 6,800 mm y-axis 4,000 mm z-axis 1,500 mm b-axis +115° / -115° c-axis +/- 200° Total power requirement: 180 kVA Space requirement approx. 12.5 x 15.0 x 7.0 m Gujdpfozf Nn Sjx Ab Esh 5-axis high-speed portal large machining centre DROOP & Rein - FOGS 40 60 C - Fork-type milling head

Stanje: rabljeno, Leto izdelave: 2006, Tehnični podatki: Premer kolesa - maks.: 300 mm Modul - maks.: 7 Teža stroja pribl.: 15 t Območje vrtljajev mize: 100 o/min Premer mize: 180 mm Vrtljaji rezkarja: 750 o/min Največji premer rezkarja: 300 mm Gsdpeyz Sd Refx Ab Esuh Največja dolžina rezkarja: 230 mm Liebherr LC300 z avtomatiziranim nakladanjem Stroj vključuje nasprotni nosilec Uporabljeno z emulzijo

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 28820005482, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 500 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, Oprema: dokumentacija / priročnik, Dear Sir or Madam, We are offering for sale a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture cannot be verified in writing, but we estimate it to be 2001. For additional details, please refer to the photos. Should you have any questions, we are of course at your disposal at any time. Guodpfx Absvx N Shs Esh The machine can be inspected under power by appointment. Collection with a suitable truck must be organized by the buyer. Dismantling and removal of the machine can be arranged either by the buyer or by us (for an additional charge of €1,500 plus VAT).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4304, premer vrtljive mize: 600 mm, višina brušenja: 450 mm, skupna masa: 14.500 kg, Machine is equipped with 3 spindles: face grinding, external grinding, and internal (bore) grinding. Turret head on B-axis with 1° indexing. Gedpfx Abevt A Rtj Ejuh Band filter unit included.

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. no.: 10598 Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC control Control system: Siemens 840 D sl Location: Halberstadt Gjdpfx Absx Hn D Rs Esuh Country of origin: Germany Machine no.: 50XXXX X-travel: 800 mm Y-travel: 800 mm Z-travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool holder: SK 40 Number of magazine tool stations: 54 Tool magazine capacity: 80 pcs. Spindle speed: 10,000 rpm Spindle motor power: 17 kW High-pressure pump: 50 bar Spindle speed range – main spindle: 10,000 rpm Number of pallets: 2 Pallet size (L x W): 630 x 500 mm Machine weight approx.: 13,000 kg Spindle run time: 7,000 h Operating hours: 14,000 h Setup station: 4 x 90° Hydraulic pressure: 200 bar Additional information: - The machine has been measured - Geometry is in first-class condition - Spindle runs somewhat rough - Clamping towers and tool holders included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer - Scraper belt conveyor for dry machining - Cool white light in working area - Central cooling unit for motor spindle and control cabinet - Operating device at the setup station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by prior arrangement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3,700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – B Axis Angular travel: -15° to +100° Angular travel (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Continuous power (100% ED): 10 kW Power at 25% ED: 15 kW Rated torque (100%): 8 Nm Rated torque (25%): 12 Nm Speed range: 50 – 30,000 rpm A Axis (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. spindle speed: 35 rpm Drive torque: Nominal: 112 Nm Maximum: 238 Nm Resolution: 0.0001° Axis clamping (A axis) pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Disc rotation speed: 60 rpm Max. tool diameter (adjacent positions filled): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Pick-off Slide Travel: 80 mm Feed force: 1,700 N Tilting torque: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting: 100 bar Workpiece Manipulator Pneumatic vertical sliding shutter: Ø: 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1,120 mm (2×560 mm) Max. vertical stroke: 150 mm Part pick-up Ø / length: Ø 32 mm / 100 mm Godpfjwv Hnmjx Ab Ejuh Part ejection Ø / length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic equipment Operating pressure: 6 bar Hydraulic system Operating pressure: 95 – 105 bar Coolant system Coolant tank volume: 80 litres Chip tray volume: 30 litres Operating kinematic viscosity: 10 – 15 cSt SCOPE OF DELIVERY Including (not an exhaustive list): Willemin Macodel W 408 B machining centre Extraction/filtration unit Fire extinguishing system Probe Coolant system Oil chiller Data backup Complete operation documentation Exact scope of delivery as per photo series No guarantee is given for the correctness, completeness, or currency of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1984, Wheel diameter - max. 250 mm Wheel width 275 mm Module - max. 6 Machine weight approx. 5.5 t The ZFWZ 250 gear hobbing machine is designed for the efficient production of all hobbed cylindrical gears, such as: - Straight and helical gears, worm wheels and worms, splined shafts, keyed shafts, serrated gears, chain wheels, ratchet wheels, as well as conical and crown-shaped straight and helical gears. Change gears and milling accessories Technical Data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Helix angle (max): 45 degrees - Cutter diameter (max): 145 mm - Cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Performance Cutter speeds - Two-range, stepped: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in two ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net weight of the machine: approx. 5,000 kg Gsdpfev T Nqaex Ab Eeuh - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm according to the table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 82.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.750 mm, hitrost pomika os X: 65 m/min, hitrost podajanja osi Y: 65 m/min, hitrost podajanja os Z: 65 m/min, največja hitrost vretena: 20.000 obr/min, hitro pomikanje X-os: 65 m/min, hitri pomik os Y: 65 m/min, hitri pomik na osi Z: 65 m/min, vrtilni moment: 63 Nm, skupna masa: 90.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Prva vključitev: 2008 Nadzor: Heidenhain iTNC 530, vključno z ročnim krmilnikom HR420 Os X: približno 5.000 mm Os Y: približno 3.000 mm Os Z: približno 1.750 mm Os A: -120 / +95° Os C: ± 360° Maksimalna velikost obdelovanca: 3.800 mm (smer X) 1.800 mm (smer Y) 1.150 mm (smer Z) Obdelava z 5 osemi (90° dodatne osi A) je možna z uporabo orodja dolžine 300 mm v eni vpenjalni postavitvi. Čas delovanja stroja: približno 83.000 ur Skupno število ur delovanja vretena: približno 37.000 ur Strojno postelje (možna pod ali nad tlemi!) Dimenzije: 5.000 x 2.250 x 300 mm - izdelana iz EN-GJL-250 9 T-utora po DIN 650-28H12 z razdaljo 250 mm in 125 mm od roba 2-osna glava za rezanje, preverjena s strani proizvajalca! Moč vretena: 20 kW Hitrost vretena: maks. 20.000 min-1 Navor: maks. 63 Nm Vpenjalni sistem za orodje: HSK 63A Vpenjalni sistem za orodje: hidravlični Držni navor (vpenjeno) osi A in C: 2.000 Nm Pogoni linearnih osi Hitrost premika osi X, Y in Z: do 65 m/min Pospešek osi X, Y in Z: do 5 m/s2 Podatki o priključitvi Napetost: 400 V Frekvenca: 50 Hz Potrebna moč: 130 kW Mere, teže Potreben prostor za stroj brez periferije: približno 7.500 x 8.500 x 6.600 mm Skupna teža: približno 90.000 kg Barva Ohišje, portal, omarica za nadzor: RAL 7035 svetlo siva Glava za rezanje in dodatki: RAL barva 5002 akvamarinska modra Dodatna oprema - Sistem za minimalno mazanje - Menjalnik orodja za 50 orodij Gedpfozkuirsx Ab Eeuh - Pokrov delovnega prostora Stanje stroja Glava za rezanje je bila nedavno preverjena s strani proizvajalca stroja, zato je delno obnovljena in v celoti delujoča. Popolnoma nova strojna postelja podjetja Stolle! Dodatni moduli, prikazani na strojni postelji, niso del ponudbe. Prikazane naprave za odsesavanje in kanali prav tako niso del ponudbe. Prejšnji lastnik je bila uveljavljena ekipa formule 1 iz srednje Evrope. Stroj je bil vedno predmet servisne pogodbe s proizvajalcem. Trenutno je stroj razstavljen in skladiščen. Vendar pa je ogled možen kadarkoli po dogovoru.