Škarje za giljotino

HÄMMERLE 10/4000

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Bledpfx Aerypmgefnjd Crank gear motor with stepless adjustment 0–90° Infinitely variable speed: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)

Stanje: rabljeno, Leto izdelave: 2018, Control system: CELOS / F31iB5 / Mapps 4S Max. turning diameter: 670 mm Turning length: 1,538 mm Max. bar capacity: 81 mm X1-axis: 675 mm Y-axis: mm Z1-axis: 1,562 + 164 mm B-axis: ° A-axis: 1,542 mm X2-axis: 200 mm Y2-axis: +/- 40 mm Z2-axis: 1,542 mm Max. spindle speed: 4,000 rpm Drive power: 26 / 22 kW Spindle bore: Ø 91 mm Max. spindle speed: 5,000 rpm Drive power: 22 / 18.5 kW Spindle bore: Ø 73 mm Speed range: 0 – 12,000 rpm Drive power: 28 / 23 kW Tool holder: Capto C6 Number of tool positions: 76 Max. tool diameter: Ø 70 / Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Number of tool holders: 10 Shank length for square tools: 20 mm Shank diameter for boring bars: Ø 32 mm Drive power: 5.5 / 5.5 / 3.7 kW Torque: 16.9 / 13.1 / 8 Nm Bljdpsyfh R Hofx Afned X-axis rapid traverse: 50 m/min Y-axis rapid traverse: 40 m/min Z-axis rapid traverse: 50 m/min A-axis rapid traverse: 36 m/min X2-axis rapid traverse: 25 m/min Y2-axis rapid traverse: 18 m/min Z2-axis rapid traverse: 40 m/min B-axis rotation speed: 100 rpm Hollow clamping device: Ø 67 mm Operating hours: approx. 23,250 h Spindle hours: approx. 8 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Kitagawa hollow chuck on main and sub-spindle - Foot switch (double) for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant type: water-soluble coolant - Chip conveyor - Coolant system 70 bar, manuf. Hydrajet - Air blow at spindle 1 and spindle 2 - Automatic measuring arm at main spindle - Workpiece ejector at the spindle - Parts unloader - Prepared for bar feeder - Interface for mist separator - 2x RotorClear - 4-color signal lamp - Multi-dry filter - Automatic probing and tool correction - Memory expansion - Cycle for plane transformation - Coolant spray gun Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in technical data and information as well as prior sale reserved!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Capacity: 100 tons (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and ram: 445 mm * Stroke adjustment: 0 - 132 mm * Ram adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings, grade SnBz-12 * Pneumatic clutch-brake combination * Completely enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * 6-way ram guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized ram adjustment * Mechanical overload protection (Hydraulic protection can be retrofitted to a standard machine) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (thin oil / slideway oil) Bedpjnxh T Rsfx Afneld OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower; mechanical or pneumatic) * Material feed, loading and unloading systems (decoiler, recoiler, straightener, pneumatic or servo feeder) * Customized machine

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: MS 1153, Technical data (approximate): - Access opening to blasting chamber: W 370 x H 170 mm - Blast nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery system Bodpfollvr Dsx Afnsld - Separate control panel - Space requirement for blasting unit: 1600 x 2000 x H 1750 mm - Space requirement for blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Extraction fan: 3 kW - Space requirement for filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED Bsdpfx Afehzbiponjld The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Bedpfef Sqckex Afnsld Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: rabljeno, Leto izdelave: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Letnik: julij 2011 Velikost palete: 500 x 500 mm Pomiki: - X: 730 mm - Y: 730 mm Bsdpfxsv Tvh Sj Afneld - Z: 740 mm Hitrost vretena: 12.000 vrt/min Izmenjevalec orodij: 40 pozicij Transporter ostružkov: kromiran

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Bledpfxsvx Uvfj Afned Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).

Stanje: novo, vrsta goriva: električni, barva: bela, Leto izdelave: 2021, Year of manufacture: 2021 Model year: 2021 Applicable material: Concrete CE marking: Yes Damage: None Price: On request Blsdpfx Aeuu A Tyofnjd

Leto izdelave: 2007, Stanje: rabljeno, številka stroja/vozila: 46650051, Horizontal machining centre with multipallet system + B39 Bljdpfegay Evjx Afnjd NIIGATA SPN 501-P8 FANUC 18I-MB Accessories: Chip conveyor High-pressure coolant system through the spindle line