Chiller

GWK weco 48.1 WZX

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Cjdeh Hbpwepfx Afweri Brand: Tool-Temp Model: TT-157E Available: 14 units

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Plate Heat Exchanger APV H17 7.41 L 4.8 m³ 800 kW APV H17 MGJ Plate Heat Exchanger /ct2227/ Manufacturer: APV Model: H17 MGJ 10.1 Csdpewx Hz Sofx Afwjri Year of manufacture: 2008 Heat transfer area: 4.08 m² Nominal power: 800 kW Width: 340 mm Height: 1050 mm Connection height: 137 mm Depth: 60 cm Pipe connection: DN50, EN 1092 Capacity: Primary: 7.41 liters Secondary: 6.86 liters Max. pressure: 10 bar Test pressure: 15.53 bar Max. temperature: 110 °C Pipe connections made of stainless steel.

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 1205, Perfect binder line Kolbus KM 412.B Year of manufacture: 2011 Crsdpfxot Rmhas Afwoi Comprising: Book block feeder Meccanotecnica XMT Year of manufacture: 2011 - Feed belt from the right Gathering machine Kolbus ZU 841.B Year of manufacture: 2011 Description: - Manual feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical signature detection: SignalLynx Card gluer Kolbus KK 841 - Hotmelt gluing: Nordson Problue - Air Center: VariAir central system - Delivery for incomplete products: AS 841 - Positioning unit - Intermediate vibrating unit - Transfer unit to binder Perfect binder Kolbus KM 412.B Year of manufacture: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine processing station - 2nd spine processing station - 3rd spine processing station - Brushing station - Exclusive dust extraction, machine was connected to central dust extraction system - Drive station for 1st spine gluing unit - Cold glue spine unit, interchangeable - Intermediate drying station (infrared) - Drive station for 2nd spine gluing unit - Hotmelt spine unit, interchangeable - Premelter for spine unit: LH 375.C - 1st PUR spine unit, interchangeable - Premelter for PUR spine unit: Nordson XNO 962 - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Premelter for side gluing unit: LH 375.A - Gauze station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Creasing station: 6 - 1st pressing station - 2nd pressing station - Laying device (to the left) Conveyor section Kolbus TSE Description: - Transport system, length (approx.) - Emergency delivery Drying tower Three-knife trimmer Kolbus HD 153.P Year of manufacture: 2011 Product counter: 148 million Description: - Co-Pilot with touchscreen - Infeed from the right - Counting stacker - Knife presetting device - Total number of knife sets: 2 - Interchangeable cutting cassettes (standard set): 7-18 - Silicone spray unit Book stacker Kolbus (RIMA) XRS 130 Year of manufacture: 2011 Description: - Compensating book stacker - Delivery to left and right

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry. Crsdsud H Dmepfx Afwoi

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Engel ES 330/80 HLS Schließkraft 80 Tonnen Crsdpfxopdr Ais Afwji Baujahr 1998 Schneckendurchmesser 35 mm Hubvolumen 154 cm³ Vergrößerte Aufspannplatte: 660 x 560 mm Minimale Werkzeug-Einbauhöhe: 200 mm

Stanje: novo, Leto izdelave: 2025, Učinkovite hladilne naprave z R290 – zračno hlajene, zanesljive, okolju prijazne. Naši modeli pokrivajo razpon moči od 20 do 800 kW ter nudijo prilagodljive možnosti z ali brez prostega hlajenja. Prednosti: Ekološko hladilno sredstvo R290 z nizkim toplogrednim potencialom Zračno hlajene, z vgrajeno črpalko in rezervoarjem Možnosti: s prostim hlajenjem uporaba zunanjega zraka za dodatno hlajenje, zmanjša porabo električne energije, še posebej v hladnejših mesecih Možnost prilagoditve od 20 do 800 kW glede na vaše potrebe Najsodobnejši nadzor Cedpfefqllwjx Afwsri Prilagojeno svetovanje, načrtovanje in dimenzioniranje Dobavni rok glede na izvedbo in opremo Trajnostno upravljanje delovanja z nizkimi emisijami CO2 in nizkimi obratovalnimi stroški Z veseljem vam svetujemo, katera izvedba je optimalna za vaše potrebe.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, CNC stružno-rezalni center Okuma Multus B300II-W Krmilnik: OSP-P 300SA Letnik izdelave: 2022 Interna št. stroja: 55 X-os: 580 mm Y-os z hodom: (+80/-80 mm) 160 mm Crsdoy Ewy Sopfx Afwei Z-os: 935 mm B-os: do 225°, pozicioniranje na 0,001° W-os: 1.000 mm Obdelovalna dolžina: 900 mm Premer struženja: 630 mm Vpenjanje orodja: HSK A63 Magazin orodij: 40 mest Oprema: - Sistem za nadzor orodij - Naprava za merjenje orodij - ONE touch IGF - Lamelni transportni trak - Rezervoar za hladilno tekočino z vključeno črpalko 20 bar - Priprava za merjenje med procesom - Korekcija višine orodja v Y-osi za stružna orodja - Hi-Cut Pro visoko hitrostni krmilnik

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C Cedpfofnvviex Afwsri *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*

Stanje: rabljeno, Leto izdelave: 1966, Dolžina strojne mize: 525 mm Velikost površine strojne mize: 500 x 300 mm Crodpfxjtumrae Afwji Dimenzije stroja (D x Š x V): 1,98 x 1,06 x 1,42 m Dodatna oprema: strojna objemka (širina čeljusti 200 mm) na vrtljivi plošči, vertikalna naprava za hoblovanje, dvig mečla.

Leto izdelave: 2000, stanje: rabljeno, Used filterless suction conveying unit Crodpfx Aedlpynofwji