Hidr. giljotinske škarje

GWF S 6 - 4000

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: MS 1153, Technical data (approximate): - Access opening to blasting chamber: W 370 x H 170 mm - Blast nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery system - Separate control panel - Space requirement for blasting unit: 1600 x 2000 x H 1750 mm - Space requirement for blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Extraction fan: 3 kW Gjdpfsllvr Djx Agyobi - Space requirement for filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam Gjdpjhzbipsfx Agyjbi - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. Gbsdpfxef Sqcke Agyji ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Gedpfx Ajd Ixadjgyjbi Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Gedpfjcubatox Agysbi Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Leto izdelave: 1981, stanje: dober (rabljeno), številka stroja/vozila: 3626, OFFER 21448 Technical Data: - Maximum working width: 2540 mm - Maximum cutting capacity (Steel 40): 4 mm - Motorized cutting angle adjustment - Cutting gap adjustment via scaled adjustment screws - Number of hydraulic hold-downs: 14 pcs - Motorized backgauge with positioning system: 10 – 1000 mm - Strokes per minute (depending on cutting angle and length): 23 per min - Hydraulic drive: 400 V / 7.5 kW - Table height: 1030 mm - Required floor space: approx. W 2500 x H 1630 x D 2150 mm - Weight: approx. 3600 kg Includes: - Pneumatically assisted sheet support Godpfx Agohhc Ixjyjbi - Front squaring arm and supporting arms - Electronic cutting depth adjustment - Cutting line illumination - Electric foot switch

Stanje: rabljeno, Leto izdelave: 2003, stiskalna sila: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year of manufacture: 2003 Technical Specifications Manufacturer: HACO Model: ERMS 60-260 Year: 2003 Pressing force: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. 7.0 x 2.0 x 3.70 m Weight: approx. 31 t Equipment • Digital control ATS 560 • Fiessler safety light curtain (front) • Centrally adjustable crowning • Amada tooling system Gbjdpfjwkttrox Agysi • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool All information is provided without guarantee. A demonstration is possible at any time in the showroom.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 15.996 h, skupna masa: 6.750 kg, vhodna napetost: 400 V, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Gbsdpfx Aetwliwsgysi Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!

Stanje: rabljeno, Leto izdelave: 1977, Surface grinding machine, manufacturer Okamoto, model PSG-63 UA, year 1977. Magnetic chuck: 600 mm x 300 mm. Grinding capacity: longitudinal 630 mm, cross 310 mm, height 350 mm. Godpfx Agjiz Tmksyjbi Ready for operation.

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Gbsdog U Uv Rjpfx Agyei Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -