Vertikalni stroj za rezanje

GSP M 743

Stanje: zelo dobro (rabljeno), GSP M 743 Mortising Machine Travel (mm): X450 Y500 Ram stroke (mm): 300 Max. tool-to-table distance (mm): 450 Throat (mm): 590 Groove width: 25–30 mm Table diameter (mm): 700 Dksdpsulfuzofx Af Sjk Feed rate (mm/rev): 0.1–2.5 mm/rev Main motor power (HP): 6 Machine equipped with: Automatic feed/Table inclination Dimensions LxWxH (mm): 2300x1700x2600 Machine weight (T): 3.5 Overall dimensions: 2500x2200, height 2400

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Description Dkedpfx Ajtxyv Iof Ssk Manufacturer: Mitutoyo Model: CV-500 The contracer comes complete with PC, software, monitor, and vice.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 3.200 h, stiskalna sila: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/stroke +230 mm + 4-axis backgauge system + Workspace lighting (rear) + Workspace lighting (front) - Documentation TruBend Automation BendMaster (60) Standard equipment: BendMaster - Robust base frame and manipulator in aluminium casting - Load capacity 60 kg, sheet plus gripper - Low-profile floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on BendMaster - Sensors for 4-axis backgauge system - Electric drives - Double-sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via Internet - Comfortable operation: screen, mouse, keyboard Safety - Protective fence with access door Dkjdoxayl Djpfx Af Sek Special equipment + Track extension to 10 m + Gripper change console + Vacuum gripper modular kit without sheet separation (material for 3 grippers) + Vacuum gripper modular kit with sheet separation (material for 3 grippers) + Pincer gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Side door right for protective fence (or left in combination with ToolMaster) Machine - Robust machine frame in all-steel construction - Press beam - Spherical mounting of the ram with tilt capability - Electro-hydraulic upper drive with 4-cylinder technology - Optical setup and positioning aid with control valves - Generously sized bending clearance - Flat front covers - Block hydraulics - Electronic pressure gauge - Measurement system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge system - 2-axis backgauge system, X and R axes Tool clamping - Upper tool hydraulic clamping - Lower tool seat, hydraulic clamping, hardened - Lower tool shifting, 2 positions, pneumatic Crowning - CNC-controlled crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via Internet Operation - Operators’ panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety features - CE marking

Stanje: rabljeno, Leto izdelave: 2007, Double-spindle machining center in 5-axis configuration (on both sides) Travel paths X/Y/Z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool pockets Tool holder: HSK 63 CNC control: Siemens 840D 1 x tool breakage control 2 x clamping bridge supports H75 mm 2 x clamping bridges for 5th axis Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x drilling head indexing unit 2 x tool length measuring system Dedpfx Afetgu Ixs Sskk 2 x upgrade kit for torsion compensation A-/U-axis

Stanje: rabljeno, Leto izdelave: 2009, X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Control: SINUMERIK 840D Spindle speeds – stepless: 5 – 10,000 rpm Drive power at 40% duty cycle: 38.00 kW Drive power at 100% duty cycle: 25.00 kW Torque at 40% / 100% duty cycle: 288 / 187 Nm Spindle taper: HSK 100 Feed rate X/Y/Z axis: 0 – 60,000 mm/min Rapid traverse X/Y/Z: 60 m/min Feed force X/Y/Z: 12.00 kN B-axis: 180 x 0.001° Rapid traverse B-axis: 10 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360 x 0.001° Table rotation speed – stepless: 1 – 800 rpm Table drive power: 13.85 kW Max. torque at faceplate: 1,550 Nm Tool magazine: chain magazine, 60 positions Tool diameter: 110 mm Tool diameter with 2 free locations: 230 mm Max. tool length: 450 mm Max. tool weight: 30.00 kg Total connected load: 80.00 kW Machine weight approx.: 18.00 t Installation dimensions approx.: 7.50 x 5.50 x H3.50 m 5-axis machining centre with SIEMENS Sinumerik 840D control, Dsdpfox Tiy Tex Af Sokk band filter system 980 l, chip conveyor, coolant through spindle, extraction unit, BLUM tool measurement, probe, operation mode 4, tool taper cleaning, hydraulic clamping with proportional valve.

Stanje: dober (rabljeno), Leto izdelave: 2000, širina mize: 1.000 mm, dolžina mize: 1.800 mm, širina plošče bata: 600 mm, skupna dolžina: 25.000 mm, skupna širina: 27.000 mm, skupna višina: 47.000 mm, skupna masa: 43.000 kg, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Sick light barrier Dkedotiwgiepfx Af Ssk Separate Rittal control cabinet Side walkways/access passages Floor-level installation

Leto izdelave: 1979, stanje: dober (rabljeno), 3-jaw chuck Dkjdpfx Afsnqy Has Sek Multifix quick-change toolpost Tailstock Technical specifications: Turning length: 1000 mm Swing over bed: 520 mm Swing over cross slide: 300 mm Spindle speed range: 30–1600 rpm Machine weight approx.: 2500 kg Technical data, accessories, and machine description are not binding.

Stanje: novo, moč: 25 kW (33,99 KM), potovalna razdalja osi X: 1.430 mm, pomik osi Y: 670 mm, pomik po osi Z: 640 mm, teža obdelovanca (maks.): 1.200 kg, število mest v zalogovniku orodij: 30, proizvajalec krmilnikov: HEIDENHAIN, skupna višina: 2.900 mm, skupna dolžina: 4.855 mm, skupna širina: 2.945 mm, skupna masa: 11.000 kg, Oprema: CE označba, dokumentacija / priročnik, LAGUN L 1400 Machining Centre – Available at Short Notice The LAGUN L 1400 machining centre stands for high precision, robust construction, and efficient manufacturing. Ideal for single-part production as well as series manufacturing in mechanical engineering, tool and mould making, and subcontracting. Your advantages at a glance: ✔ Installation & commissioning in Germany included Dkodpfxshy Atfe Af Sek ✔ Service & spare parts directly through JMT ✔ Financing / hire purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and is known for robust design, high dynamics, and long-lasting machine concepts. The machining centres impress with their reliability, easy maintenance, and low operating costs. Technical features: Control: HEIDENHAIN TNC 7 CNC control + 16" TFT monitor HEIDENHAIN motors, measurement systems and electronic handwheel HR 510 Chip removal: Chip conveyor Preparation: Prepared for 4th axis (rotary table) Enclosure: Full enclosure with side opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a customised offer

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 116 h, nosilnost: 4.000 kg, dvižna višina: 17.000 mm, vrsta goriva: dizel, tip droga: teleskopski, moč: 85 kW (115,57 KM), lastna masa: 13.040 kg, vrsta pogona: Diesel, Rigid telehandler Mast type: Telescopic Speed class: 20 Technical condition: New Front tires type: Pneumatic Front tires size: 400/70-24 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 400/70-24 Rear tires condition: 80 - 100% 3rd valve, 4th valve, heating, full cab, CE certificate Specifications: - Lifting capacity 4000 kg - Lifting height 16.4 m - Max. gradeability 40% - Unladen weight 13,040 kg - Engine KUBOTA 85.1 kW ( 114 HP ) - Displacement 3,769 cm³ - Emission standard Tier 4f - Steering: front wheel steering, all-wheel steering and crab steering. Dedpfx Aev Ezt Djf Sjkk

Stanje: dober (rabljeno), Leto izdelave: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Dkodpfx Afovca Rcj Sjk Drilling slide stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunge spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – self-driven Feed rate: 20 – 500 mm/min Rapid traverse NC operation: 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided regarding the accuracy, completeness, or currency of the information given.